[Fri May 18 10:46:14 2012] Detection parameters:
  Position = (185.3, 339.8) = 1 36 2.85 37 58 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.1 +/- 21.1
  Background counts = 83.3
  Rate = 0.02 +/- 0.002

[Fri May 18 10:46:14 2012] Off-axis axis estimate = 8.74'
[Fri May 18 11:35:40 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Fri May 18 11:35:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 11:35:40 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Fri May 18 11:35:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Fri May 18 11:35:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.80"
[Fri May 18 11:48:03 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 18 11:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src3.csv
[Fri May 18 11:48:03 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 18 11:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src3.csv
[Fri May 18 11:48:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 11:48:03 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 18 11:48:03 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 18 11:48:03 2012] Fit fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 18 11:48:13 2012] Spatial fit model total counts = 128.000000, observed total counts = 128.000000
[Fri May 18 11:48:13 2012] Offset between fit and detection position for source 3 = 0.713218 pixels
[Fri May 18 11:48:13 2012] 128.416900 total counts/ 58.709200 bgd. counts: snr = 9.097617
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.713218 pixels
  Position = (185.4, 340.5) = 1 36 2.79 37 58 3.4
  Extent = 6.2 (5.1-7.5)", rotation angle = 0
  Source counts = 69.7 +/- 11.3
  Background counts = 58.7
  Rate = 0.008 +/- 0.001
[Fri May 18 11:48:13 2012] Vigneting correction estimate = 1.000000
[Fri May 18 11:48:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 11:48:13 2012] Assessing source extent using major axis lower bound
[Fri May 18 11:48:13 2012] Source does appear to be extended
[Fri May 18 11:48:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 12:28:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 12:28:36 2012] Initial guess for spatial extent in simple fitting = 6.17"
[Fri May 18 12:28:36 2012] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.612
[Fri May 18 12:28:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.17"
[Fri May 18 12:41:56 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 18 12:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src3.csv
[Fri May 18 12:41:56 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 18 12:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src3.csv
[Fri May 18 12:41:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:41:56 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 18 12:41:56 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 18 12:41:56 2012] Fit fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May 18 12:42:05 2012] Spatial fit model total counts = 128.000000, observed total counts = 128.000000
[Fri May 18 12:42:05 2012] Offset between fit and detection position for source 3 = 0.001897 pixels
[Fri May 18 12:42:05 2012] 128.412300 total counts/ 58.477700 bgd. counts: snr = 9.145279
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001897 pixels
  Position = (185.4, 340.5) = 1 36 2.79 37 58 3.4
  Extent = 6.2 (5.1-7.5)", rotation angle = 0
  Source counts = 69.9 +/- 11.3
  Background counts = 58.5
  Rate = 0.008 +/- 0.001
[Fri May 18 12:42:05 2012] Vigneting correction estimate = 1.000000
[Fri May 18 12:42:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 12:42:05 2012] Assessing source extent using major axis lower bound
[Fri May 18 12:42:05 2012] Source does appear to be extended
[Fri May 18 12:42:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 13:24:17 2012] XMMSAS src. selection expression = ellipse(16083.478800, 29578.610000, 372.655811, 372.655811, 0.000000, X, Y)
[Fri May 18 13:24:17 2012] Writing source region out to fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src3_src.reg
[Fri May 18 13:24:17 2012] Extracting stamp from image fullrun_mos2_xmm0600450501_pi300-10000_cl_sm2.00.img.gz, (164, 319) - (207, 362)
[Fri May 18 13:24:17 2012] XMMSAS bgd. selection expression = annulus(16083.478800, 29578.610000, 621.093018, 1242.186036, X, Y)
[Fri May 18 13:24:17 2012] Writing fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src3.gif
[Fri May 18 13:25:28 2012] Mean detx,y = (-9267.58, -788.13) 
[Fri May 18 13:25:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 13:25:41 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 13:25:41 2012] Setting source spectrum file to fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 18 13:25:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 18 13:27:47 2012] Not generating rmf since there are only 69 counts
[Fri May 18 13:27:47 2012] rmf not generated due to insufficient counts
[Fri May 18 13:29:05 2012] Updating aperture counts using extracted products
[Fri May 18 13:29:06 2012] Error reading totcts from fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 18 13:29:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 13:29:06 2012] Using photon index=1.80, rate=0.0082, arf fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src3.arf
[Fri May 18 13:29:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 13:29:06 2012] Updating source flux to 1.5e-13
[Fri May 18 13:29:25 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 18 13:29:26 2012] xmm0600450501/analysis//spectral/fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete