[Fri May 18 10:45:38 2012] Detection parameters:
  Position = (129.6, 301.1) = 1 36 23.27 37 55 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.1 +/- 16.9
  Background counts = 84.7
  Rate = 0.007 +/- 0.002

[Fri May 18 10:45:39 2012] Off-axis axis estimate = 12.24'
[Fri May 18 11:19:41 2012] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Fri May 18 11:19:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 11:19:41 2012] Initial guess for spatial extent in simple fitting = 12.55"
[Fri May 18 11:19:41 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Fri May 18 11:19:41 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.55"
[Fri May 18 11:35:40 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 18 11:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src5.csv
[Fri May 18 11:35:40 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 18 11:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src5.csv
[Fri May 18 11:35:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 11:35:40 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 18 11:35:40 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 18 11:35:40 2012] Fit fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri May 18 11:48:11 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.554112 pixels away
[Fri May 18 11:48:11 2012] Vigneting correction estimate = 1.000000
[Fri May 18 11:48:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 11:48:11 2012] Assessing source extent using major
[Fri May 18 11:48:11 2012] Source does appear to be extended
[Fri May 18 11:48:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 12:16:02 2012] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Fri May 18 12:16:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 12:16:02 2012] Initial guess for spatial extent in simple fitting = 12.55"
[Fri May 18 12:16:02 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Fri May 18 12:16:02 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.55"
[Fri May 18 12:28:36 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 18 12:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src5.csv
[Fri May 18 12:28:36 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 18 12:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src5.csv
[Fri May 18 12:28:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:28:36 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 18 12:28:36 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 18 12:28:36 2012] Fit fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri May 18 12:42:03 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.259188 pixels away
[Fri May 18 12:42:03 2012] Vigneting correction estimate = 1.000000
[Fri May 18 12:42:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 12:42:03 2012] Assessing source extent using major
[Fri May 18 12:42:03 2012] Source does appear to be extended
[Fri May 18 12:42:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 13:13:40 2012] XMMSAS src. selection expression = ellipse(11229.761780, 26149.664398, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 13:13:40 2012] Writing source region out to fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src4_src.reg
[Fri May 18 13:13:40 2012] Extracting stamp from image fullrun_mos1_xmm0600450501_pi300-10000_cl_sm2.00.img.gz, (92, 264) - (167, 339)
[Fri May 18 13:13:40 2012] XMMSAS bgd. selection expression = annulus(11229.761780, 26149.664398, 1087.500000, 2175.000000, X, Y)
[Fri May 18 13:13:40 2012] Writing fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src4.gif
[Fri May 18 13:15:53 2012] Mean detx,y = (4610.54, 12125.52) 
[Fri May 18 13:15:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 13:16:12 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 13:16:12 2012] Setting source spectrum file to fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 18 13:16:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May 18 13:23:55 2012] Not generating rmf since there are only 70 counts
[Fri May 18 13:23:55 2012] rmf not generated due to insufficient counts
[Fri May 18 13:29:05 2012] Updating aperture counts using extracted products
[Fri May 18 13:29:05 2012] Error reading totcts from fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 18 13:29:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 13:29:05 2012] Using photon index=1.80, rate=0.00745, arf fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src4.arf
[Fri May 18 13:29:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 13:29:05 2012] Updating source flux to 1.4e-13
[Fri May 18 13:29:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting