[Fri May 18 10:45:38 2012] Detection parameters:
  Position = (185.2, 340.0) = 1 36 2.86 37 58 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.3 +/- 22.4
  Background counts = 92.4
  Rate = 0.02 +/- 0.002

[Fri May 18 10:45:39 2012] Off-axis axis estimate = 8.74'
[Fri May 18 11:19:41 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Fri May 18 11:19:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 11:19:41 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Fri May 18 11:19:41 2012] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.955
[Fri May 18 11:19:41 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.80"
[Fri May 18 11:35:40 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 18 11:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src2.csv
[Fri May 18 11:35:40 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 18 11:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src2.csv
[Fri May 18 11:35:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 11:35:40 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 18 11:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 18 11:35:40 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 18 11:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 18 11:35:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 11:48:11 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.436686 pixels away
[Fri May 18 11:48:11 2012] Vigneting correction estimate = 1.000000
[Fri May 18 11:48:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 11:48:11 2012] Assessing source extent using major
[Fri May 18 11:48:11 2012] Source does appear to be extended
[Fri May 18 11:48:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 12:16:02 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Fri May 18 12:16:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 12:16:02 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Fri May 18 12:16:02 2012] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.955
[Fri May 18 12:16:02 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.80"
[Fri May 18 12:28:36 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 18 12:28:36 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 18 12:28:36 2012] Fit fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri May 18 12:28:36 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 18 12:28:36 2012] fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 18 12:28:36 2012] Fit fullrun_mos1_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 18 12:42:03 2012] Spatial fit model total counts = 123.972000, observed total counts = 125.000000
[Fri May 18 12:42:03 2012] Offset between fit and detection position for source 2 = 0.392742 pixels
[Fri May 18 12:42:03 2012] 123.912900 total counts/ 62.664300 bgd. counts: snr = 7.737240
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.392742 pixels
  Position = (184.9, 340.3) = 1 36 2.97 37 58 2.2
  Extent = 7.0 (5.1-9.4)" x 3.8 (2.7-5.7)", rotation angle = 92 (67-113) degrees
  Source counts = 61.2 +/- 11.1
  Background counts = 62.7
  Rate = 0.007 +/- 0.001
[Fri May 18 12:42:03 2012] Vigneting correction estimate = 1.000000
[Fri May 18 12:42:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 12:42:03 2012] Assessing source extent using major axis lower bound
[Fri May 18 12:42:03 2012] Source does appear to be extended
[Fri May 18 12:42:03 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Fri May 18 13:13:40 2012] XMMSAS src. selection expression = ellipse(16040.907300, 29555.575800, 417.717612, 226.252807, 92.169584, X, Y)
[Fri May 18 13:13:40 2012] Writing source region out to fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src2_src.reg
[Fri May 18 13:13:40 2012] Extracting stamp from image fullrun_mos1_xmm0600450501_pi300-10000_cl_sm2.00.img.gz, (161, 316) - (209, 364)
[Fri May 18 13:13:40 2012] XMMSAS bgd. selection expression = annulus(16040.907300, 29555.575800, 696.196020, 1392.392040, X, Y)
[Fri May 18 13:13:40 2012] Writing fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src2.gif
[Fri May 18 13:14:34 2012] Mean detx,y = (-585.13, 9113.68) 
[Fri May 18 13:14:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 13:15:03 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 13:15:04 2012] Setting source spectrum file to fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 13:15:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 18 13:23:28 2012] Not generating rmf since there are only 61 counts
[Fri May 18 13:23:28 2012] rmf not generated due to insufficient counts
[Fri May 18 13:29:04 2012] Updating aperture counts using extracted products
[Fri May 18 13:29:05 2012] Error reading totcts from fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 13:29:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 13:29:05 2012] Using photon index=1.80, rate=0.00718, arf fullrun_mos1_xmm0600450501_pi300-10000_pass1_cl_src2.arf
[Fri May 18 13:29:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 13:29:05 2012] Updating source flux to 1.5e-13
[Fri May 18 13:29:07 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting