[Sat Dec 17 14:37:26 2011] Detection parameters:
  Position = (324.0, 341.9) = 15 23 59.30 54 29 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.4 +/- 8.3
  Background counts = 3.6
  Rate = 0.006 +/- 0.001

[Sat Dec 17 14:37:26 2011] Off-axis axis estimate = 3.66'
[Sat Dec 17 14:53:26 2011] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 14:53:26 2011] Initial guess for spatial extent in simple fitting = 8.26"
[Sat Dec 17 14:53:26 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.869
[Sat Dec 17 14:53:26 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 8.26"
[Sat Dec 17 15:02:19 2011] fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_src4.ximg exists
[Sat Dec 17 15:02:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_src4.csv
[Sat Dec 17 15:02:19 2011] fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Dec 17 15:02:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_src4.csv
[Sat Dec 17 15:02:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 15:02:19 2011] fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Dec 17 15:02:19 2011] fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Dec 17 15:02:19 2011] Fit fullrun_mos1_xmm0600450201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Dec 17 15:13:27 2011] Spatial fit model total counts = 58.996100, observed total counts = 59.000000
[Sat Dec 17 15:13:27 2011] Offset between fit and detection position for source 3 = 0.353817 pixels
[Sat Dec 17 15:13:27 2011] 60.224100 total counts/ 26.900400 bgd. counts: snr = 6.425011
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.353817 pixels
  Position = (323.8, 341.6) = 15 23 59.42 54 29 52.7
  Extent = 7.0 (5.2-9.6)", rotation angle = 0
  Source counts = 33.3 +/- 7.8
  Background counts = 26.9
  Rate = 0.004 +/- 0.001
[Sat Dec 17 15:13:27 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 15:13:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 15:13:27 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 15:13:27 2011] Source does appear to be extended
[Sat Dec 17 15:13:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 15:32:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 15:32:14 2011] Initial guess for spatial extent in simple fitting = 7.01"
[Sat Dec 17 15:32:14 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Sat Dec 17 15:32:14 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.01"
[Sat Dec 17 15:37:43 2011] fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_src4.ximg exists
[Sat Dec 17 15:37:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_src4.csv
[Sat Dec 17 15:37:43 2011] fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Dec 17 15:37:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_src4.csv
[Sat Dec 17 15:37:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 15:37:43 2011] fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Dec 17 15:37:43 2011] fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Dec 17 15:37:43 2011] Fit fullrun_mos1_xmm0600450201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Dec 17 15:48:18 2011] Warning, spatial fit 4 centroid is now closest to src. 4
[Sat Dec 17 15:48:18 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 15:48:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 15:48:18 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 15:48:18 2011] Source does appear to be extended
[Sat Dec 17 15:48:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 15:57:00 2011] XMMSAS src. selection expression = ellipse(28121.484220, 29671.906800, 420.712212, 420.712212, 0.000000, X, Y)
[Sat Dec 17 15:57:00 2011] Writing source region out to fullrun_mos1_xmm0600450201_pi300-10000_pass1_cl_src3_src.reg
[Sat Dec 17 15:57:00 2011] Extracting stamp from image fullrun_mos1_xmm0600450201_pi300-10000_cl_sm2.00.img.gz, (300, 317) - (348, 366)
[Sat Dec 17 15:57:00 2011] XMMSAS bgd. selection expression = annulus(28121.484220, 29671.906800, 701.187020, 1402.374040, X, Y)
[Sat Dec 17 15:57:00 2011] Writing fullrun_mos1_xmm0600450201_pi300-10000_pass1_cl_src3.gif
[Sat Dec 17 15:57:40 2011] Mean detx,y = (2484.59, 569.71) 
[Sat Dec 17 15:57:41 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 15:57:49 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 15:57:49 2011] Setting source spectrum file to fullrun_mos1_xmm0600450201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 17 15:57:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0600450201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Dec 17 15:58:23 2011] Not generating rmf since there are only 33 counts
[Sat Dec 17 15:58:23 2011] rmf not generated due to insufficient counts
[Sat Dec 17 16:00:24 2011] Updating aperture counts using extracted products
[Sat Dec 17 16:00:24 2011] Error reading totcts from fullrun_mos1_xmm0600450201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 17 16:00:25 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 16:00:25 2011] Using photon index=1.80, rate=0.00439, arf fullrun_mos1_xmm0600450201_pi300-10000_pass1_cl_src3.arf
[Sat Dec 17 16:00:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 16:00:25 2011] Updating source flux to 5e-14
[Sat Dec 17 16:00:26 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Dec 17 16:00:27 2011] xmm0600450201/analysis//spectral/fullrun_mos1_xmm0600450201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete