[Sun Dec 18 22:29:20 2011] Detection parameters:
  Position = (367.5, 270.8) = 10 47 49.68 -39 56 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.4 +/- 8.9
  Background counts = 10.5
  Rate = 0.002 +/- 0.0005

[Sun Dec 18 22:29:20 2011] Off-axis axis estimate = 5.39'
[Sun Dec 18 23:07:15 2011] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 23:07:15 2011] Initial guess for spatial extent in simple fitting = 9.12"
[Sun Dec 18 23:07:15 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.926
[Sun Dec 18 23:07:15 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 9.12"
[Sun Dec 18 23:32:40 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Dec 18 23:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src11.csv
[Sun Dec 18 23:32:40 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Dec 18 23:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src11.csv
[Sun Dec 18 23:32:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 23:32:41 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Dec 18 23:32:41 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Dec 18 23:32:41 2011] Fit fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Dec 18 23:53:48 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.421917 pixels away
[Sun Dec 18 23:53:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 23:53:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 23:53:48 2011] Assessing source extent using major
[Sun Dec 18 23:53:48 2011] Source does appear to be extended
[Sun Dec 18 23:53:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 00:30:02 2011] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 00:30:02 2011] Initial guess for spatial extent in simple fitting = 9.12"
[Mon Dec 19 00:30:02 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.926
[Mon Dec 19 00:30:02 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 9.12"
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src11.ximg exists
[Mon Dec 19 00:55:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src11.csv
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Dec 19 00:55:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src11.csv
[Mon Dec 19 00:55:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Dec 19 00:55:31 2011] Fit fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Dec 19 01:13:55 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 83.004411 pixels away
[Mon Dec 19 01:13:55 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 56.450999 pixels away
[Mon Dec 19 01:13:55 2011] Spatial fit model total counts = 130.999000, observed total counts = 131.000000
[Mon Dec 19 01:13:55 2011] Offset between fit and detection position for source 8 = 0.078556 pixels
[Mon Dec 19 01:13:55 2011] 131.433100 total counts/ 104.560000 bgd. counts: snr = 2.628058
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.078556 pixels
  Position = (367.5, 270.9) = 10 47 49.67 -39 56 37.8
  Extent = 4.5 (2.3-6.5)", rotation angle = 0
  Source counts = 26.9 +/- 11.5
  Background counts = 104.6
  Rate = 0.001 +/- 0.0005
[Mon Dec 19 01:13:55 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 01:13:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 01:13:55 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 01:13:55 2011] Source does appear to be extended
[Mon Dec 19 01:13:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 01:33:54 2011] XMMSAS src. selection expression = ellipse(31925.832800, 23517.961800, 267.459608, 267.459608, 0.000000, X, Y)
[Mon Dec 19 01:33:54 2011] Writing source region out to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src8_src.reg
[Mon Dec 19 01:33:54 2011] Extracting stamp from image fullrun_mos1_xmm0600410101_pi300-10000_cl_sm2.00.img.gz, (352, 256) - (383, 286)
[Mon Dec 19 01:33:54 2011] XMMSAS bgd. selection expression = annulus(31925.832800, 23517.961800, 445.766013, 891.532026, X, Y)
[Mon Dec 19 01:33:54 2011] Writing fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src8.gif
[Mon Dec 19 01:36:38 2011] Mean detx,y = (4670.49, -3576.84) 
[Mon Dec 19 01:36:39 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 01:36:46 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 01:36:46 2011] Setting source spectrum file to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Dec 19 01:36:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Dec 19 01:42:14 2011] Not generating rmf since there are only 26 counts
[Mon Dec 19 01:42:14 2011] rmf not generated due to insufficient counts
[Mon Dec 19 01:48:15 2011] Updating aperture counts using extracted products
[Mon Dec 19 01:48:15 2011] Error reading totcts from fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Dec 19 01:48:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 01:48:15 2011] Using photon index=1.80, rate=0.00125, arf fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src8.arf
[Mon Dec 19 01:48:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 01:48:15 2011] Updating source flux to 2.1e-14
[Mon Dec 19 01:48:16 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting