[Sun Dec 18 22:29:20 2011] Detection parameters:
  Position = (350.4, 342.7) = 10 47 56.18 -39 51 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.7 +/- 9.5
  Background counts = 9.9
  Rate = 0.003 +/- 0.0007

[Sun Dec 18 22:29:20 2011] Off-axis axis estimate = 4.95'
[Sun Dec 18 23:07:15 2011] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 23:07:15 2011] Initial guess for spatial extent in simple fitting = 8.90"
[Sun Dec 18 23:07:15 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Sun Dec 18 23:07:15 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 8.90"
[Sun Dec 18 23:32:40 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Dec 18 23:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src9.csv
[Sun Dec 18 23:32:40 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Dec 18 23:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src9.csv
[Sun Dec 18 23:32:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 23:32:41 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Dec 18 23:32:41 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Dec 18 23:32:41 2011] Fit fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Dec 18 23:53:48 2011] Spatial fit model total counts = 116.357000, observed total counts = 116.000000
[Sun Dec 18 23:53:48 2011] Offset between fit and detection position for source 6 = 0.250065 pixels
[Sun Dec 18 23:53:48 2011] 119.154700 total counts/ 66.269600 bgd. counts: snr = 6.496451
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.250065 pixels
  Position = (350.5, 342.5) = 10 47 56.15 -39 51 26.3
  Extent = 7.7 (5.4-10.9)", rotation angle = 0
  Source counts = 52.9 +/- 10.9
  Background counts = 66.3
  Rate = 0.002 +/- 0.0005
[Sun Dec 18 23:53:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 23:53:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 23:53:48 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 23:53:48 2011] Source does appear to be extended
[Sun Dec 18 23:53:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 00:30:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 00:30:02 2011] Initial guess for spatial extent in simple fitting = 7.71"
[Mon Dec 19 00:30:02 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.209
[Mon Dec 19 00:30:02 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 7.71"
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Dec 19 00:55:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src9.csv
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Dec 19 00:55:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src9.csv
[Mon Dec 19 00:55:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Dec 19 00:55:31 2011] Fit fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Dec 19 01:13:55 2011] Warning, spatial fit 9 centroid is now closest to src. 8
[Mon Dec 19 01:13:55 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 01:13:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 01:13:55 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 01:13:55 2011] Source does appear to be extended
[Mon Dec 19 01:13:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 01:33:54 2011] XMMSAS src. selection expression = ellipse(30441.737000, 29749.280200, 462.821413, 462.821413, 0.000000, X, Y)
[Mon Dec 19 01:33:54 2011] Writing source region out to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src6_src.reg
[Mon Dec 19 01:33:54 2011] Extracting stamp from image fullrun_mos1_xmm0600410101_pi300-10000_cl_sm2.00.img.gz, (324, 316) - (377, 369)
[Mon Dec 19 01:33:54 2011] XMMSAS bgd. selection expression = annulus(30441.737000, 29749.280200, 771.369022, 1542.738044, X, Y)
[Mon Dec 19 01:33:54 2011] Writing fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src6.gif
[Mon Dec 19 01:36:03 2011] Mean detx,y = (-609.17, -7265.58) 
[Mon Dec 19 01:36:04 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 01:36:26 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 01:36:26 2011] Setting source spectrum file to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 01:36:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Dec 19 01:42:07 2011] Not generating rmf since there are only 52 counts
[Mon Dec 19 01:42:07 2011] rmf not generated due to insufficient counts
[Mon Dec 19 01:48:15 2011] Updating aperture counts using extracted products
[Mon Dec 19 01:48:15 2011] Error reading totcts from fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 01:48:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 01:48:15 2011] Using photon index=1.80, rate=0.00246, arf fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src6.arf
[Mon Dec 19 01:48:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 01:48:15 2011] Updating source flux to 3.9e-14
[Mon Dec 19 01:48:16 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting