[Sun Dec 18 22:29:20 2011] Detection parameters:
  Position = (252.6, 154.7) = 10 48 33.16 -40 5 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.6 +/- 14.2
  Background counts = 9.6
  Rate = 0.01 +/- 0.001

[Sun Dec 18 22:29:20 2011] Off-axis axis estimate = 10.94'
[Sun Dec 18 23:07:15 2011] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 23:07:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 23:07:15 2011] Initial guess for spatial extent in simple fitting = 11.90"
[Sun Dec 18 23:07:15 2011] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.170
[Sun Dec 18 23:07:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.90"
[Sun Dec 18 23:32:40 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 23:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 23:32:40 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 23:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 23:32:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 23:32:41 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 23:32:41 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 23:32:41 2011] Fit fullrun_mos1_xmm0600410101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 23:53:48 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.269922 pixels away
[Sun Dec 18 23:53:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 23:53:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 23:53:48 2011] Assessing source extent using major
[Sun Dec 18 23:53:48 2011] Source does appear to be extended
[Sun Dec 18 23:53:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 00:30:02 2011] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 00:30:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 00:30:02 2011] Initial guess for spatial extent in simple fitting = 11.90"
[Mon Dec 19 00:30:02 2011] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.170
[Mon Dec 19 00:30:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 11.90"
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 19 00:55:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 19 00:55:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 00:55:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 00:55:31 2011] fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 00:55:31 2011] Fit fullrun_mos1_xmm0600410101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 01:13:55 2011] Spatial fit model total counts = 280.993000, observed total counts = 281.000000
[Mon Dec 19 01:13:55 2011] Offset between fit and detection position for source 13 = 0.059563 pixels
[Mon Dec 19 01:13:55 2011] 286.215500 total counts/ 197.790000 bgd. counts: snr = 6.287462
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.059563 pixels
  Position = (252.6, 154.6) = 10 48 33.16 -40 5 3.6
  Extent = 5.1 (4.1-6.3)", rotation angle = 0
  Source counts = 88.4 +/- 16.9
  Background counts = 197.8
  Rate = 0.004 +/- 0.0008
[Mon Dec 19 01:13:55 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 01:13:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 01:13:55 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 01:13:55 2011] Source does appear to be extended
[Mon Dec 19 01:13:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 01:33:54 2011] XMMSAS src. selection expression = ellipse(21930.241600, 13403.204200, 305.145609, 305.145609, 0.000000, X, Y)
[Mon Dec 19 01:33:54 2011] Writing source region out to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src13_src.reg
[Mon Dec 19 01:33:54 2011] Extracting stamp from image fullrun_mos1_xmm0600410101_pi300-10000_cl_sm2.00.img.gz, (235, 137) - (270, 172)
[Mon Dec 19 01:33:54 2011] XMMSAS bgd. selection expression = annulus(21930.241600, 13403.204200, 508.576015, 1017.152029, X, Y)
[Mon Dec 19 01:33:54 2011] Writing fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src13.gif
[Mon Dec 19 01:33:56 2011] Mean detx,y = (3971.60, 10611.40) 
[Mon Dec 19 01:33:57 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 01:34:02 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 01:34:02 2011] Setting source spectrum file to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Dec 19 01:34:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Dec 19 01:38:19 2011] Not generating rmf since there are only 88 counts
[Mon Dec 19 01:38:19 2011] rmf not generated due to insufficient counts
[Mon Dec 19 01:48:14 2011] Updating aperture counts using extracted products
[Mon Dec 19 01:48:14 2011] Error reading totcts from fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Dec 19 01:48:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 01:48:15 2011] Using photon index=1.80, rate=0.00411, arf fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src13.arf
[Mon Dec 19 01:48:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 01:48:15 2011] Updating source flux to 8.3e-14
[Mon Dec 19 01:48:16 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Dec 19 01:48:23 2011] xmm0600410101/analysis//spectral/fullrun_mos1_xmm0600410101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete