[Wed Mar 21 23:32:43 2012] Detection parameters:
  Position = (354.1, 419.9) = 5 18 46.25 33 52 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 271.0 +/- 24.1
  Background counts = 136.4
  Rate = 0.002 +/- 0.0002

[Wed Mar 21 23:32:48 2012] Off-axis axis estimate = 9.69'
[Wed Mar 21 23:41:08 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 23:41:08 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Wed Mar 21 23:41:08 2012] source mask rpix=2.6, npix_max = 38, mask sum = 24, frac = 0.628
[Wed Mar 21 23:41:08 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.27"
[Thu Mar 22 03:06:40 2012] fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_src15.ximg exists
[Thu Mar 22 03:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_src15.csv
[Thu Mar 22 03:06:40 2012] fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Mar 22 03:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_src15.csv
[Thu Mar 22 03:06:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 03:06:41 2012] fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Mar 22 03:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Mar 22 03:06:41 2012] fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Mar 22 03:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Mar 22 03:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:33:11 2012] Warning, spatial fit 15 centroid is now closest to src. 4
[Thu Mar 22 06:33:11 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:33:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:33:11 2012] Assessing source extent using major
[Thu Mar 22 06:33:11 2012] Source does appear to be extended
[Thu Mar 22 06:33:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 06:33:59 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 06:33:59 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Thu Mar 22 06:33:59 2012] source mask rpix=2.6, npix_max = 38, mask sum = 24, frac = 0.628
[Thu Mar 22 06:33:59 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 11.27"
[Thu Mar 22 09:17:02 2012] fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_src14.ximg exists
[Thu Mar 22 09:17:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_src14.csv
[Thu Mar 22 09:17:02 2012] fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Mar 22 09:17:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_src14.csv
[Thu Mar 22 09:17:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 09:17:03 2012] fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Mar 22 09:17:03 2012] fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Mar 22 09:17:03 2012] Fit fullrun_pn_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Mar 22 12:38:50 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.775836 pixels away
[Thu Mar 22 12:38:51 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 12:38:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 12:38:51 2012] Assessing source extent using major
[Thu Mar 22 12:38:51 2012] Source does appear to be extended
[Thu Mar 22 12:38:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 12:39:44 2012] XMMSAS src. selection expression = ellipse(30762.199005, 36480.088684, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 12:39:44 2012] Writing source region out to fullrun_pn_xmm0600320101_pi300-10000_pass1_cl_src16_src.reg
[Thu Mar 22 12:39:44 2012] Extracting stamp from image fullrun_pn_xmm0600320101_pi300-10000_cl_sm2.00.img.gz, (317, 382) - (392, 457)
[Thu Mar 22 12:39:44 2012] XMMSAS bgd. selection expression = annulus(30762.199005, 36480.088684, 1087.500000, 2175.000000, X, Y) && !ellipse(30938.576000, 35773.162000, 341.235210, 341.235210, 0.000000, X, Y) && !ellipse(32679.969147, 37647.566132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29817.744019, 36500.543030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31614.898834, 36051.131531, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 12:39:44 2012] Writing fullrun_pn_xmm0600320101_pi300-10000_pass1_cl_src16.gif
[Thu Mar 22 13:31:33 2012] Mean detx,y = (3660.46, -8981.64) 
[Thu Mar 22 13:31:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 13:32:31 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 13:32:32 2012] Setting source spectrum file to fullrun_pn_xmm0600320101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Mar 22 13:32:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600320101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Mar 22 16:15:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 22 16:15:17 2012] rmf not generated due to insufficient counts
[Thu Mar 22 20:00:52 2012] Updating aperture counts using extracted products
[Thu Mar 22 20:00:52 2012] Error reading totcts from fullrun_pn_xmm0600320101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Mar 22 20:00:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 20:00:56 2012] Using photon index=1.80, rate=0.00237, arf fullrun_pn_xmm0600320101_pi300-10000_pass1_cl_src16.arf
[Thu Mar 22 20:00:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 20:00:56 2012] Updating source flux to 1.8e-14
[Thu Mar 22 20:06:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting