[Wed Mar 21 23:33:00 2012] Detection parameters:
  Position = (313.8, 262.1) = 5 19 0.37 33 40 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.6 +/- 14.6
  Background counts = 43.7
  Rate = 0.001 +/- 0.0001

[Wed Mar 21 23:33:00 2012] Off-axis axis estimate = 2.86'
[Thu Mar 22 04:41:28 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 04:41:28 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Thu Mar 22 04:41:28 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Thu Mar 22 04:41:28 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.86"
[Thu Mar 22 06:32:51 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src28.ximg exists
[Thu Mar 22 06:32:51 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Mar 22 06:32:51 2012] Fit fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src28 appears to have run properly
[Thu Mar 22 06:32:52 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Mar 22 06:32:52 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Mar 22 06:32:52 2012] Fit fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Mar 22 06:33:33 2012] Spatial fit model total counts = 481.433000, observed total counts = 452.000000
[Thu Mar 22 06:33:33 2012] Offset between fit and detection position for source 41 = 0.152124 pixels
[Thu Mar 22 06:33:33 2012] 486.143000 total counts/ 381.810000 bgd. counts: snr = 5.339469
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.152124 pixels
  Position = (313.6, 262.1) = 5 19 0.42 33 40 56.0
  Extent = 8.8 (5.3-13.4)" x 6.5 (4.6-9.2)", rotation angle = 12 (25-20) degrees
  Source counts = 104.3 +/- 22.0
  Background counts = 381.8
  Rate = 0.0009 +/- 0.0002
[Thu Mar 22 06:33:34 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:33:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:33:34 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 06:33:34 2012] Source does appear to be extended
[Thu Mar 22 06:33:34 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.58
[Thu Mar 22 10:50:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 10:50:00 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Thu Mar 22 10:50:00 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.978
[Thu Mar 22 10:50:00 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.66"
[Thu Mar 22 12:38:29 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src28.ximg exists
[Thu Mar 22 12:38:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src28.csv
[Thu Mar 22 12:38:29 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Mar 22 12:38:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src28.csv
[Thu Mar 22 12:38:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 12:38:30 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Mar 22 12:38:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Mar 22 12:38:30 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Mar 22 12:38:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Mar 22 12:38:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 12:39:19 2012] Warning, spatial fit 28 centroid is now closest to src. 45
[Thu Mar 22 12:39:19 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 12:39:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 12:39:19 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 12:39:19 2012] Source does appear to be extended
[Thu Mar 22 12:39:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.58
[Thu Mar 22 18:23:47 2012] XMMSAS src. selection expression = ellipse(27235.391000, 22757.768400, 528.344415, 390.682811, 12.381501, X, Y)
[Thu Mar 22 18:23:47 2012] Writing source region out to fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src41_src.reg
[Thu Mar 22 18:23:47 2012] Extracting stamp from image fullrun_mos2_xmm0600320101_pi300-10000_cl_sm2.00.img.gz, (283, 232) - (344, 293)
[Thu Mar 22 18:23:47 2012] XMMSAS bgd. selection expression = annulus(27235.391000, 22757.768400, 880.574025, 1761.148051, X, Y) && !ellipse(26315.643620, 24233.833000, 250.367207, 250.367207, 0.000000, X, Y)
[Thu Mar 22 18:23:47 2012] Writing fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src41.gif
[Thu Mar 22 18:43:54 2012] Mean detx,y = (-197.65, -4743.35) 
[Thu Mar 22 18:43:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 18:44:06 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 18:44:07 2012] Setting source spectrum file to fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Mar 22 18:44:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Mar 22 20:01:05 2012] Updating aperture counts using extracted products
[Thu Mar 22 20:01:05 2012] Error reading totcts from fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Mar 22 20:01:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 20:01:07 2012] Using photon index=1.80, rate=0.000904, arf fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src41.arf
[Thu Mar 22 20:01:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 20:01:07 2012] Updating source flux to 1.3e-14