[Wed Mar 21 23:32:57 2012] Detection parameters:
  Position = (266.1, 376.2) = 5 19 17.01 33 49 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.3 +/- 16.6
  Background counts = 46.0
  Rate = 0.002 +/- 0.0002

[Wed Mar 21 23:33:00 2012] Off-axis axis estimate = 6.11'
[Thu Mar 22 04:41:28 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 04:41:28 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Thu Mar 22 04:41:28 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.044
[Thu Mar 22 04:41:28 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 9.48"
[Thu Mar 22 06:32:51 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src19.ximg exists
[Thu Mar 22 06:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src19.csv
[Thu Mar 22 06:32:51 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Mar 22 06:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src19.csv
[Thu Mar 22 06:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:32:52 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Mar 22 06:32:52 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Mar 22 06:32:52 2012] Fit fullrun_mos2_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Mar 22 06:33:33 2012] Source 21 is offset by 8.744859 and -0.981970 pixels which is larger than
2 X fitted extent = 1.104814 x 1.104814, not incorporating fit results
[Thu Mar 22 06:33:34 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:33:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:33:34 2012] Assessing source extent using major
[Thu Mar 22 06:33:34 2012] Source does appear to be extended
[Thu Mar 22 06:33:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 10:50:00 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 10:50:00 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Thu Mar 22 10:50:00 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.044
[Thu Mar 22 10:50:00 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 9.48"
[Thu Mar 22 12:38:29 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src19.ximg exists
[Thu Mar 22 12:38:29 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Mar 22 12:38:29 2012] Fit fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_src19 appears to have run properly
[Thu Mar 22 12:38:29 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Mar 22 12:38:29 2012] fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Mar 22 12:38:29 2012] Fit fullrun_mos2_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Mar 22 12:39:19 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.869908 pixels away
[Thu Mar 22 12:39:19 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 12:39:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 12:39:19 2012] Assessing source extent using major
[Thu Mar 22 12:39:19 2012] Source does appear to be extended
[Thu Mar 22 12:39:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 18:23:47 2012] XMMSAS src. selection expression = ellipse(23099.112732, 32680.316956, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 18:23:47 2012] Writing source region out to fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src21_src.reg
[Thu Mar 22 18:23:47 2012] Extracting stamp from image fullrun_mos2_xmm0600320101_pi300-10000_cl_sm2.00.img.gz, (229, 339) - (304, 414)
[Thu Mar 22 18:23:47 2012] XMMSAS bgd. selection expression = annulus(23099.112732, 32680.316956, 1087.500000, 2175.000000, X, Y)
[Thu Mar 22 18:23:47 2012] Writing fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src21.gif
[Thu Mar 22 18:37:38 2012] Mean detx,y = (4223.18, 5054.87) 
[Thu Mar 22 18:37:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 18:38:05 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 18:38:06 2012] Setting source spectrum file to fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Mar 22 18:38:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Mar 22 19:40:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 22 19:40:50 2012] rmf not generated due to insufficient counts
[Thu Mar 22 20:01:04 2012] Updating aperture counts using extracted products
[Thu Mar 22 20:01:04 2012] Error reading totcts from fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Mar 22 20:01:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 20:01:07 2012] Using photon index=1.80, rate=0.00165, arf fullrun_mos2_xmm0600320101_pi300-10000_pass1_cl_src21.arf
[Thu Mar 22 20:01:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 20:01:07 2012] Updating source flux to 2.9e-14
[Thu Mar 22 20:03:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting