[Wed Mar 21 23:32:50 2012] Detection parameters:
  Position = (224.5, 430.1) = 5 19 31.55 33 53 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 574.3 +/- 30.3
  Background counts = 42.5
  Rate = 0.005 +/- 0.0003

[Wed Mar 21 23:32:54 2012] Off-axis axis estimate = 10.95'
[Thu Mar 22 03:06:42 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 03:06:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 03:06:42 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Thu Mar 22 03:06:42 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.002
[Thu Mar 22 03:06:42 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.90"
[Thu Mar 22 04:41:27 2012] fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Mar 22 04:41:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_src3.csv
[Thu Mar 22 04:41:27 2012] fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Mar 22 04:41:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_src3.csv
[Thu Mar 22 04:41:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 04:41:28 2012] fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Mar 22 04:41:28 2012] fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Mar 22 04:41:28 2012] Fit fullrun_mos1_xmm0600320101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Mar 22 06:33:25 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.096759 pixels away
[Thu Mar 22 06:33:25 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:33:25 2012] Assessing source extent using major
[Thu Mar 22 06:33:25 2012] Source does appear to be extended
[Thu Mar 22 06:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 09:17:04 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 09:17:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 09:17:04 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Thu Mar 22 09:17:04 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.002
[Thu Mar 22 09:17:04 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.90"
[Thu Mar 22 10:49:58 2012] fullrun_mos1_xmm0600320101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 22 10:49:58 2012] fullrun_mos1_xmm0600320101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 22 10:49:58 2012] Fit fullrun_mos1_xmm0600320101_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Mar 22 10:49:59 2012] fullrun_mos1_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 22 10:49:59 2012] fullrun_mos1_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 22 10:49:59 2012] Fit fullrun_mos1_xmm0600320101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Mar 22 12:39:05 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.791895 pixels away
[Thu Mar 22 12:39:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 12:39:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 12:39:05 2012] Assessing source extent using major
[Thu Mar 22 12:39:05 2012] Source does appear to be extended
[Thu Mar 22 12:39:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 17:22:54 2012] XMMSAS src. selection expression = ellipse(19479.255081, 37370.535065, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 17:22:54 2012] Writing source region out to fullrun_mos1_xmm0600320101_pi300-10000_pass1_cl_src9_src.reg
[Thu Mar 22 17:22:54 2012] Extracting stamp from image fullrun_mos1_xmm0600320101_pi300-10000_cl_sm2.00.img.gz, (187, 393) - (262, 468)
[Thu Mar 22 17:22:54 2012] XMMSAS bgd. selection expression = annulus(19479.255081, 37370.535065, 1087.500000, 2175.000000, X, Y)
[Thu Mar 22 17:22:54 2012] Writing fullrun_mos1_xmm0600320101_pi300-10000_pass1_cl_src9.gif
[Thu Mar 22 17:26:55 2012] Mean detx,y = (9882.98, -8093.83) 
[Thu Mar 22 17:26:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 17:27:32 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 17:27:33 2012] Setting source spectrum file to fullrun_mos1_xmm0600320101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Mar 22 17:27:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600320101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Mar 22 17:55:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 22 17:55:16 2012] rmf not generated due to insufficient counts
[Thu Mar 22 20:00:59 2012] Updating aperture counts using extracted products
[Thu Mar 22 20:00:59 2012] Error reading totcts from fullrun_mos1_xmm0600320101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Mar 22 20:01:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 20:01:01 2012] Using photon index=1.80, rate=0.00497, arf fullrun_mos1_xmm0600320101_pi300-10000_pass1_cl_src9.arf
[Thu Mar 22 20:01:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 20:01:01 2012] Updating source flux to 1.3e-13
[Thu Mar 22 20:01:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting