[Fri May  3 04:41:18 2013] Detection parameters:
  Position = (261.7, 385.1) = 6 17 21.44 22 48 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 644.3 +/- 68.9
  Background counts = 2195.2
  Rate = 0.01 +/- 0.002

[Fri May  3 04:41:57 2013] Off-axis axis estimate = 6.82'
[Fri May  3 04:45:42 2013] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:42 2013] Initial guess for spatial extent in simple fitting = 9.84"
[Fri May  3 04:45:42 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.983
[Fri May  3 04:45:42 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 9.84"
[Fri May  3 04:45:46 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src73.ximg exists
[Fri May  3 04:45:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src73.csv
[Fri May  3 04:45:46 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src73_1.ximg exists
[Fri May  3 04:45:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src73.csv
[Fri May  3 04:45:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:48 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Fri May  3 04:45:48 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Fri May  3 04:45:48 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Fri May  3 04:46:36 2013] Spatial fit model total counts = 28499.100000, observed total counts = 28478.000000
[Fri May  3 04:46:36 2013] Offset between fit and detection position for source 82 = 1.601820 pixels
[Fri May  3 04:46:36 2013] 27965.300000 total counts/ 25321.300000 bgd. counts: snr = 16.615693
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 1.601820 pixels
  Position = (262.9, 386.2) = 6 17 21.07 22 48 16.1
  Extent = 19.7 (19.7-39.4)", rotation angle = 0
  Source counts = 2644.0 +/- 167.2
  Background counts = 25321.3
  Rate = 0.05 +/- 0.003
[Fri May  3 04:46:36 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:36 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:46:36 2013] Source does appear to be extended
[Fri May  3 04:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:46:37 2013] Source is confused with source 77
[Fri May  3 04:48:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:25 2013] Initial guess for spatial extent in simple fitting = 19.68"
[Fri May  3 04:48:25 2013] source mask rpix=4.5, npix_max = 100, mask sum = 100, frac = 0.990
[Fri May  3 04:48:25 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 19.68"
[Fri May  3 04:48:28 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src70.ximg exists
[Fri May  3 04:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src70.csv
[Fri May  3 04:48:28 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src70_1.ximg exists
[Fri May  3 04:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src70.csv
[Fri May  3 04:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:30 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri May  3 04:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Fri May  3 04:48:30 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri May  3 04:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Fri May  3 04:48:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:49:11 2013] Warning, spatial fit 70 centroid is now closest to src. 195
[Fri May  3 04:49:11 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:11 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:11 2013] Source does appear to be extended
[Fri May  3 04:49:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:51:14 2013] Counts = 2644.000000, rescaling region sizes by 2.000000
[Fri May  3 04:51:14 2013] XMMSAS src. selection expression = ellipse(22819.861200, 33552.162280, 2361.804068, 2361.804068, 0.000000, X, Y)
[Fri May  3 04:51:14 2013] Not overwriting source region fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src82_src.reg
[Fri May  3 04:51:14 2013] Extracting stamp from image fullrun_pn_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (127, 250) - (399, 522)
[Fri May  3 04:51:15 2013] XMMSAS bgd. selection expression = annulus(22819.861200, 33552.162280, 7872.680227, 15745.360453, X, Y) && !ellipse(28964.937988, 28147.459778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30177.927948, 25886.755432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24798.358032, 23438.651154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.675323, 28981.494751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23507.660675, 28831.145752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22382.690000, 37516.200000, 11674.416336, 11674.416336, 0.000000, X, Y) && !ellipse(21638.210200, 37732.660200, 1841.520053, 1273.008037, 33.734000, X, Y) && !ellipse(19394.399017, 38669.348846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.888000, 38370.930000, 1545.056044, 1545.056044, 209.339000, X, Y) && !ellipse(29480.836731, 28116.964111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20911.346024, 39187.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18306.616257, 38312.953644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15971.174164, 34318.053192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30702.410400, 29016.416351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18669.382202, 28656.763428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24907.357605, 20724.211594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23390.873901, 18826.808182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21699.244553, 39010.958191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22569.102509, 38570.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.452698, 38145.439880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17516.223328, 28925.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20474.756989, 29460.470001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13367.466583, 26332.136597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35675.134247, 21691.624619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22563.585358, 40151.691528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25047.854000, 39341.086000, 1884.264054, 1884.264054, 0.000000, X, Y) && !ellipse(27561.263824, 38925.973358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26656.005035, 38829.537384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25673.926000, 38495.126000, 1890.880054, 1890.880054, 0.000000, X, Y) && !ellipse(25311.301727, 38836.010345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.227000, 38672.194200, 794.123223, 794.123223, 0.000000, X, Y) && !ellipse(24848.923065, 38572.034058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.209839, 38228.337860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.106000, 38427.218000, 1619.032047, 1619.032047, 0.000000, X, Y) && !ellipse(27565.998000, 38056.589000, 1390.016040, 1390.016040, 0.000000, X, Y) && !ellipse(30012.195709, 38060.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20066.762619, 38240.673126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.936157, 37894.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.877167, 37714.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20259.996979, 37716.517242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32108.694458, 37437.112579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31390.690000, 37858.096000, 1215.456035, 1215.456035, 0.000000, X, Y) && !ellipse(27966.660000, 37556.902000, 1782.352051, 1782.352051, 0.000000, X, Y) && !ellipse(19530.734772, 38068.414825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33182.966000, 37220.894000, 10818.864311, 10818.864311, 0.000000, X, Y) && !ellipse(26635.986000, 37675.674000, 3101.616089, 1648.432047, 84.780000, X, Y) && !ellipse(25536.216000, 36893.430000, 1780.232051, 1780.232051, 0.000000, X, Y) && !ellipse(33467.710000, 37476.472000, 11064.144318, 11064.144318, 0.000000, X, Y) && !ellipse(28487.457520, 36925.772522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32626.954000, 36702.890000, 1844.024053, 1844.024053, 0.000000, X, Y) && !ellipse(32036.392000, 36276.674000, 11490.288331, 11490.288331, 0.000000, X, Y) && !ellipse(28541.350000, 36293.752000, 3560.464102, 3560.464102, 0.000000, X, Y) && !ellipse(20174.866119, 36934.998749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33615.144806, 36410.723389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25788.330841, 37189.682434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.872711, 37190.781616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31548.222000, 35631.224000, 11077.968319, 11077.968319, 0.000000, X, Y) && !ellipse(20617.280289, 36184.302490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32604.704000, 36018.295600, 1846.328053, 1846.328053, 0.000000, X, Y) && !ellipse(30376.792000, 36710.768000, 1604.784046, 1604.784046, 0.000000, X, Y) && !ellipse(20557.828873, 35547.714081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29039.516400, 35908.647200, 1729.128050, 1729.128050, 0.000000, X, Y) && !ellipse(30983.469147, 34768.616974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14709.171036, 34926.564667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31460.718628, 34843.871124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29377.025085, 35716.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.474000, 35732.866000, 11283.024325, 11283.024325, 0.000000, X, Y) && !ellipse(20525.922058, 34225.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21155.530396, 34240.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14412.850000, 33518.054000, 1310.936038, 1310.936038, 0.000000, X, Y) && !ellipse(22054.702200, 33677.683400, 1603.544046, 1603.544046, 0.000000, X, Y) && !ellipse(21653.399600, 33388.612400, 638.764018, 638.764018, 0.000000, X, Y) && !ellipse(15518.523529, 33268.774994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14992.338000, 33123.818000, 1900.632055, 1900.632055, 0.000000, X, Y) && !ellipse(14763.192917, 32751.917786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21255.180000, 32574.680000, 1572.432045, 1572.432045, 0.000000, X, Y) && !ellipse(17428.036530, 32819.798920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14323.352798, 32228.229187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30103.380035, 31782.887848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14936.038800, 31648.314400, 1843.016053, 1843.016053, 0.000000, X, Y) && !ellipse(14146.327393, 31543.173218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13371.544708, 31616.311310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25439.372375, 31181.831696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14623.201187, 31533.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12635.760000, 31385.372000, 1992.424057, 1992.424057, 0.000000, X, Y) && !ellipse(14198.899628, 31015.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29523.816345, 30921.442352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25329.278931, 30759.522736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12458.676000, 31047.220000, 2006.256058, 2006.256058, 0.000000, X, Y) && !ellipse(29091.686432, 30307.761536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11729.412000, 30336.656000, 1995.368057, 1995.368057, 0.000000, X, Y) && !ellipse(23408.760834, 30484.198853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10453.064819, 29804.484802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.234000, 29840.318000, 1389.928040, 1389.928040, 0.000000, X, Y) && !ellipse(23284.899600, 29493.546400, 1321.712038, 1321.712038, 0.000000, X, Y) && !ellipse(29415.082275, 29180.664429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.012000, 28591.598000, 3841.512111, 3841.512111, 0.000000, X, Y) && !ellipse(22514.777954, 28786.397888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21705.906200, 28408.529669, 4135.728119, 3979.545323, 79.459015, X, Y) && !ellipse(25218.035858, 28010.149628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22390.804016, 27874.445770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25378.765200, 27123.066000, 1090.176031, 1090.176031, 0.000000, X, Y) && !ellipse(17145.441849, 27781.578156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21207.744000, 27027.587800, 762.901622, 762.901622, 0.000000, X, Y) && !ellipse(30624.896820, 26926.679962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25528.605255, 26754.681854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23959.846680, 26832.747681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23003.529022, 26833.838898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22306.281158, 26914.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34628.038483, 26723.543671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.625305, 26572.544189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24262.403198, 26138.730988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32308.246460, 25697.396088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23047.108673, 26052.745209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.567719, 25444.446136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27174.136658, 25447.194092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.283813, 25709.072906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23806.532013, 26144.569397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31509.579132, 25608.463226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26762.923065, 25255.073517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13205.236328, 24401.439117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17315.483200, 23478.941223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16925.905441, 22917.431732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9779.459991, 22831.100800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9036.153343, 22665.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11184.198822, 21705.259521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29747.768066, 20309.367249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34973.534790, 19479.310837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23950.962952, 19437.760956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30801.227936, 19089.563156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23307.893616, 18310.329315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24405.339355, 18670.149506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12210.921219, 17854.097046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10897.863205, 17720.125595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12226.591202, 17347.342224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21867.226929, 17184.693802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15585.225830, 17431.802689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12779.726730, 17187.359451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.589386, 16994.306961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22906.130000, 40359.831400, 2003.600058, 2003.600058, 0.000000, X, Y) && !ellipse(28560.454000, 40291.230000, 1956.544056, 1956.544056, 0.000000, X, Y) && !ellipse(27554.145691, 40139.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25436.446533, 39609.069916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.211304, 39459.721863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31403.279724, 39096.561646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30115.423248, 38675.073090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19321.372437, 37130.337219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21924.102966, 35324.744720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14998.610000, 34766.652000, 1987.232057, 1987.232057, 0.000000, X, Y) && !ellipse(21842.833847, 34660.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18168.841476, 34486.578522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30737.862000, 34240.842000, 10374.768299, 10374.768299, 0.000000, X, Y) && !ellipse(23480.698853, 33675.321045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17807.497299, 33155.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17046.826096, 33250.980988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16407.082184, 33451.252502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22289.796082, 32945.458801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25242.231140, 32073.056000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30812.079041, 31882.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.071808, 31685.185425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25907.768000, 31599.980000, 1381.096040, 1381.096040, 0.000000, X, Y) && !ellipse(30460.866455, 31272.678833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32165.310303, 31293.398682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32743.302216, 30724.980804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.682465, 30198.950470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32529.152863, 30321.583618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11384.822000, 30057.216000, 2006.256058, 2006.256058, 0.000000, X, Y) && !ellipse(21520.507980, 29427.725525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26947.768860, 29627.811188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.596222, 28056.440063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32713.897766, 28021.550323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28702.360901, 27630.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21199.468475, 27614.027222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22171.004761, 27342.157532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20572.377106, 27373.632904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.080261, 27532.860321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29335.670349, 26656.281158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33564.417816, 26486.484070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14241.429214, 26574.830170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27981.037231, 26305.719055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27157.290497, 26422.720886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21450.659470, 25927.406586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32812.643616, 25792.701019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22048.173813, 25885.409332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30962.688232, 25187.436646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14819.437057, 25183.979797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28130.064026, 24958.225311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24458.904572, 24752.237518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16558.077682, 24479.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.711090, 24393.397034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16767.465240, 24043.007507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.169342, 24316.587036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25322.269653, 24050.993835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15255.743332, 23683.564331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24380.849365, 24053.861267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35212.105103, 23430.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27196.693787, 23515.203613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16668.499023, 23519.990631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17842.187912, 23362.698730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15613.674469, 22925.909241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35269.281158, 22834.812531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.603119, 23107.157471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14968.516953, 22572.790344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16827.699890, 22138.305420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15259.093979, 22143.668579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29550.632141, 21789.984161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16050.904694, 21979.853271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34041.146912, 21419.676605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33457.319244, 20914.038223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.404816, 20914.309036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.125183, 20969.898712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35177.772919, 20824.465500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28512.605957, 20486.310349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29085.492249, 20141.303894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34463.822266, 20481.131714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.942200, 20399.006348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33023.617554, 19989.414978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35060.537445, 20317.427917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34270.998108, 19633.481750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25147.250122, 19440.884598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29259.720581, 19530.971069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29833.857391, 19343.616272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29069.896606, 18661.689255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.867645, 18744.708038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32281.388184, 18332.435089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22331.867676, 18300.423401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33313.063538, 18233.784821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15599.050568, 18029.809540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29155.030121, 18052.881744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21418.678314, 17528.303711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21983.142853, 17880.452194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31177.142914, 17419.381134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29371.027374, 17439.162430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25664.415314, 17253.064789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21032.301193, 17213.348206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29953.957642, 17176.622513, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:51:15 2013] Writing fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src82.gif