[Fri May  3 04:41:15 2013] Detection parameters:
  Position = (380.4, 413.1) = 6 16 44.07 22 50 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 494.5 +/- 49.2
  Background counts = 942.5
  Rate = 0.006 +/- 0.0006

[Fri May  3 04:41:57 2013] Off-axis axis estimate = 10.22'
[Fri May  3 04:45:42 2013] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:42 2013] Initial guess for spatial extent in simple fitting = 11.54"
[Fri May  3 04:45:42 2013] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.056
[Fri May  3 04:45:42 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 11.54"
[Fri May  3 04:45:45 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src55.ximg exists
[Fri May  3 04:45:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src55.csv
[Fri May  3 04:45:45 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri May  3 04:45:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src55.csv
[Fri May  3 04:45:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:48 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri May  3 04:45:48 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri May  3 04:45:48 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Fri May  3 04:46:36 2013] Spatial fit model total counts = 22779.400000, observed total counts = 22346.000000
[Fri May  3 04:46:36 2013] Offset between fit and detection position for source 63 = 5.323750 pixels
[Fri May  3 04:46:36 2013] 22360.365000 total counts/ 21469.900000 bgd. counts: snr = 6.077176
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 5.323750 pixels
  Position = (375.3, 414.6) = 6 16 45.69 22 50 19.3
  Extent = 23.1 (23.0-46.2)", rotation angle = 0
  Source counts = 890.5 +/- 149.5
  Background counts = 21469.9
  Rate = 0.02 +/- 0.003
[Fri May  3 04:46:36 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:36 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:46:36 2013] Source does appear to be extended
[Fri May  3 04:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:46:37 2013] Source is confused with source 52
[Fri May  3 04:48:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:25 2013] Initial guess for spatial extent in simple fitting = 23.08"
[Fri May  3 04:48:25 2013] source mask rpix=5.3, npix_max = 134, mask sum = 121, frac = 0.898
[Fri May  3 04:48:25 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 23.08"
[Fri May  3 04:48:27 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src53.ximg exists
[Fri May  3 04:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src53.csv
[Fri May  3 04:48:27 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri May  3 04:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src53.csv
[Fri May  3 04:48:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:30 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri May  3 04:48:30 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri May  3 04:48:30 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri May  3 04:49:11 2013] Warning, spatial fit 53 centroid is now closest to src. 61
[Fri May  3 04:49:11 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:11 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:11 2013] Source does appear to be extended
[Fri May  3 04:49:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:51:12 2013] XMMSAS src. selection expression = ellipse(32604.704000, 36018.295600, 1384.746040, 1384.746040, 0.000000, X, Y)
[Fri May  3 04:51:12 2013] Not overwriting source region fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src63_src.reg
[Fri May  3 04:51:12 2013] Extracting stamp from image fullrun_pn_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (296, 335) - (455, 494)
[Fri May  3 04:51:12 2013] XMMSAS bgd. selection expression = annulus(32604.704000, 36018.295600, 2307.910066, 4615.820133, X, Y) && !ellipse(22382.690000, 37516.200000, 11674.416336, 11674.416336, 0.000000, X, Y) && !ellipse(27561.263824, 38925.973358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.227000, 38672.194200, 794.123223, 794.123223, 0.000000, X, Y) && !ellipse(29185.209839, 38228.337860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27565.998000, 38056.589000, 1390.016040, 1390.016040, 0.000000, X, Y) && !ellipse(30012.195709, 38060.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.877167, 37714.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32108.694458, 37437.112579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31390.690000, 37858.096000, 1215.456035, 1215.456035, 0.000000, X, Y) && !ellipse(27966.660000, 37556.902000, 1782.352051, 1782.352051, 0.000000, X, Y) && !ellipse(33182.966000, 37220.894000, 10818.864311, 10818.864311, 0.000000, X, Y) && !ellipse(26635.986000, 37675.674000, 3101.616089, 1648.432047, 84.780000, X, Y) && !ellipse(33467.710000, 37476.472000, 11064.144318, 11064.144318, 0.000000, X, Y) && !ellipse(28487.457520, 36925.772522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32626.954000, 36702.890000, 1844.024053, 1844.024053, 0.000000, X, Y) && !ellipse(32036.392000, 36276.674000, 11490.288331, 11490.288331, 0.000000, X, Y) && !ellipse(28541.350000, 36293.752000, 3560.464102, 3560.464102, 0.000000, X, Y) && !ellipse(33615.144806, 36410.723389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31548.222000, 35631.224000, 11077.968319, 11077.968319, 0.000000, X, Y) && !ellipse(30376.792000, 36710.768000, 1604.784046, 1604.784046, 0.000000, X, Y) && !ellipse(29039.516400, 35908.647200, 1729.128050, 1729.128050, 0.000000, X, Y) && !ellipse(30983.469147, 34768.616974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31460.718628, 34843.871124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29377.025085, 35716.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.474000, 35732.866000, 11283.024325, 11283.024325, 0.000000, X, Y) && !ellipse(30103.380035, 31782.887848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29523.816345, 30921.442352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.012000, 28591.598000, 3841.512111, 3841.512111, 0.000000, X, Y) && !ellipse(28560.454000, 40291.230000, 1956.544056, 1956.544056, 0.000000, X, Y) && !ellipse(27554.145691, 40139.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31403.279724, 39096.561646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30115.423248, 38675.073090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30737.862000, 34240.842000, 10374.768299, 10374.768299, 0.000000, X, Y) && !ellipse(30812.079041, 31882.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30460.866455, 31272.678833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32165.310303, 31293.398682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32743.302216, 30724.980804, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:51:12 2013] Writing fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src63.gif