[Fri May  3 04:41:12 2013] Detection parameters:
  Position = (297.2, 437.9) = 6 17 10.26 22 52 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 537.2 +/- 59.1
  Background counts = 1452.9
  Rate = 0.006 +/- 0.0007

[Fri May  3 04:41:57 2013] Off-axis axis estimate = 10.11'
[Fri May  3 04:45:42 2013] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:42 2013] Initial guess for spatial extent in simple fitting = 11.48"
[Fri May  3 04:45:42 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Fri May  3 04:45:42 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 11.48"
[Fri May  3 04:45:44 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src29.ximg exists
[Fri May  3 04:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src29.csv
[Fri May  3 04:45:44 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri May  3 04:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src29.csv
[Fri May  3 04:45:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:47 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri May  3 04:45:47 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri May  3 04:45:47 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri May  3 04:46:35 2013] Warning, spatial fit 29 centroid is now closest to src. 50
[Fri May  3 04:46:35 2013] Spatial fit model total counts = 17434.100000, observed total counts = 17441.000000
[Fri May  3 04:46:35 2013] Offset between fit and detection position for source 36 = 5.691632 pixels
[Fri May  3 04:46:35 2013] Warning, changing simple spatial fit ID from 29 to 32
[Fri May  3 04:46:35 2013] 16853.590000 total counts/ 16498.600000 bgd. counts: snr = 2.763711
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 5.691632 pixels
  Position = (302.5, 435.8) = 6 17 8.60 22 51 51.7
  Extent = 19.4 (12.5-22.8)", rotation angle = 0
  Source counts = 355.0 +/- 129.8
  Background counts = 16498.6
  Rate = 0.007 +/- 0.003
[Fri May  3 04:46:36 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:36 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:46:36 2013] Source does appear to be extended
[Fri May  3 04:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:46:37 2013] Source is confused with source 29
[Fri May  3 04:48:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:25 2013] Initial guess for spatial extent in simple fitting = 19.39"
[Fri May  3 04:48:25 2013] source mask rpix=4.5, npix_max = 98, mask sum = 90, frac = 0.916
[Fri May  3 04:48:25 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 19.39"
[Fri May  3 04:48:27 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src28.ximg exists
[Fri May  3 04:48:27 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri May  3 04:48:27 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src28 appears to have run properly
[Fri May  3 04:48:29 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri May  3 04:48:29 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri May  3 04:48:29 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri May  3 04:49:10 2013] Spatial fit model total counts = 15778.400000, observed total counts = 15776.000000
[Fri May  3 04:49:10 2013] Offset between fit and detection position for source 36 = 6.490652 pixels
[Fri May  3 04:49:10 2013] Warning, changing simple spatial fit ID from 28 to 23
[Fri May  3 04:49:10 2013] 13296.156000 total counts/ 12452.700000 bgd. counts: snr = 7.558414
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 6.490652 pixels
  Position = (302.4, 442.2) = 6 17 8.64 22 52 19.9
  Extent = 20.2 (13.7-23.6)", rotation angle = 0
  Source counts = 843.5 +/- 115.3
  Background counts = 12452.7
  Rate = 0.02 +/- 0.002
[Fri May  3 04:49:11 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:11 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:11 2013] Source does appear to be extended
[Fri May  3 04:49:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:51:07 2013] XMMSAS src. selection expression = ellipse(26257.106000, 38427.218000, 1214.274035, 1214.274035, 0.000000, X, Y)
[Fri May  3 04:51:07 2013] Not overwriting source region fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src36_src.reg
[Fri May  3 04:51:07 2013] Extracting stamp from image fullrun_pn_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (233, 372) - (372, 512)
[Fri May  3 04:51:07 2013] XMMSAS bgd. selection expression = annulus(26257.106000, 38427.218000, 2023.790058, 4047.580116, X, Y) && !ellipse(22382.690000, 37516.200000, 11674.416336, 11674.416336, 0.000000, X, Y) && !ellipse(21638.210200, 37732.660200, 1841.520053, 1273.008037, 33.734000, X, Y) && !ellipse(22001.888000, 38370.930000, 1545.056044, 1545.056044, 209.339000, X, Y) && !ellipse(21699.244553, 39010.958191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22569.102509, 38570.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.452698, 38145.439880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22563.585358, 40151.691528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25047.854000, 39341.086000, 1884.264054, 1884.264054, 0.000000, X, Y) && !ellipse(27561.263824, 38925.973358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26656.005035, 38829.537384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25673.926000, 38495.126000, 1890.880054, 1890.880054, 0.000000, X, Y) && !ellipse(25311.301727, 38836.010345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.227000, 38672.194200, 794.123223, 794.123223, 0.000000, X, Y) && !ellipse(24848.923065, 38572.034058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.209839, 38228.337860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27565.998000, 38056.589000, 1390.016040, 1390.016040, 0.000000, X, Y) && !ellipse(30012.195709, 38060.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.936157, 37894.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.877167, 37714.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31390.690000, 37858.096000, 1215.456035, 1215.456035, 0.000000, X, Y) && !ellipse(27966.660000, 37556.902000, 1782.352051, 1782.352051, 0.000000, X, Y) && !ellipse(33182.966000, 37220.894000, 10818.864311, 10818.864311, 0.000000, X, Y) && !ellipse(26635.986000, 37675.674000, 3101.616089, 1648.432047, 84.780000, X, Y) && !ellipse(25536.216000, 36893.430000, 1780.232051, 1780.232051, 0.000000, X, Y) && !ellipse(33467.710000, 37476.472000, 11064.144318, 11064.144318, 0.000000, X, Y) && !ellipse(28487.457520, 36925.772522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32036.392000, 36276.674000, 11490.288331, 11490.288331, 0.000000, X, Y) && !ellipse(28541.350000, 36293.752000, 3560.464102, 3560.464102, 0.000000, X, Y) && !ellipse(25788.330841, 37189.682434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.872711, 37190.781616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31548.222000, 35631.224000, 11077.968319, 11077.968319, 0.000000, X, Y) && !ellipse(30376.792000, 36710.768000, 1604.784046, 1604.784046, 0.000000, X, Y) && !ellipse(29039.516400, 35908.647200, 1729.128050, 1729.128050, 0.000000, X, Y) && !ellipse(30983.469147, 34768.616974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29377.025085, 35716.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.474000, 35732.866000, 11283.024325, 11283.024325, 0.000000, X, Y) && !ellipse(22054.702200, 33677.683400, 1603.544046, 1603.544046, 0.000000, X, Y) && !ellipse(22819.861200, 33552.162280, 1574.536045, 1574.536045, 0.000000, X, Y) && !ellipse(22906.130000, 40359.831400, 2003.600058, 2003.600058, 0.000000, X, Y) && !ellipse(28560.454000, 40291.230000, 1956.544056, 1956.544056, 0.000000, X, Y) && !ellipse(27554.145691, 40139.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25436.446533, 39609.069916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.211304, 39459.721863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30115.423248, 38675.073090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21924.102966, 35324.744720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21842.833847, 34660.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30737.862000, 34240.842000, 10374.768299, 10374.768299, 0.000000, X, Y) && !ellipse(23480.698853, 33675.321045, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:51:07 2013] Writing fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src36.gif