[Fri May  3 04:41:10 2013] Detection parameters:
  Position = (284.8, 452.1) = 6 17 14.18 22 53 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 332.2 +/- 45.8
  Background counts = 917.9
  Rate = 0.004 +/- 0.0005

[Fri May  3 04:41:57 2013] Off-axis axis estimate = 11.18'
[Fri May  3 04:45:42 2013] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:42 2013] Initial guess for spatial extent in simple fitting = 12.02"
[Fri May  3 04:45:42 2013] source mask rpix=2.8, npix_max = 42, mask sum = 35, frac = 0.822
[Fri May  3 04:45:42 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 12.02"
[Fri May  3 04:45:44 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src20.ximg exists
[Fri May  3 04:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src20.csv
[Fri May  3 04:45:44 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri May  3 04:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src20.csv
[Fri May  3 04:45:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:47 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri May  3 04:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri May  3 04:45:47 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri May  3 04:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri May  3 04:45:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:46:35 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 12.873080 pixels away
[Fri May  3 04:46:35 2013] Spatial fit model total counts = 16461.300000, observed total counts = 16454.000000
[Fri May  3 04:46:35 2013] Offset between fit and detection position for source 27 = 3.759920 pixels
[Fri May  3 04:46:35 2013] Warning, changing simple spatial fit ID from 20 to 23
[Fri May  3 04:46:35 2013] 15945.430000 total counts/ 15326.800000 bgd. counts: snr = 4.996953
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 3.759920 pixels
  Position = (288.5, 452.8) = 6 17 13.02 22 53 5.6
  Extent = 23.6 (23.5-47.1)", rotation angle = 0
  Source counts = 618.6 +/- 126.3
  Background counts = 15326.8
  Rate = 0.01 +/- 0.003
[Fri May  3 04:46:36 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:36 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:46:36 2013] Source does appear to be extended
[Fri May  3 04:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:46:37 2013] Source is confused with source 30
[Fri May  3 04:46:37 2013] Source is confused with source 31
[Fri May  3 04:46:37 2013] Source is confused with source 33
[Fri May  3 04:46:37 2013] Source is confused with source 170
[Fri May  3 04:46:37 2013] Source is confused with source 171
[Fri May  3 04:48:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:25 2013] Initial guess for spatial extent in simple fitting = 23.55"
[Fri May  3 04:48:25 2013] source mask rpix=5.4, npix_max = 139, mask sum = 132, frac = 0.943
[Fri May  3 04:48:25 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 23.55"
[Fri May  3 04:48:26 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src19.ximg exists
[Fri May  3 04:48:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src19.csv
[Fri May  3 04:48:26 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May  3 04:48:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src19.csv
[Fri May  3 04:48:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:29 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May  3 04:48:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May  3 04:48:29 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May  3 04:48:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May  3 04:48:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:49:10 2013] Warning, spatial fit 19 centroid is now closest to src. 31
[Fri May  3 04:49:11 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:11 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:11 2013] Source does appear to be extended
[Fri May  3 04:49:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:51:06 2013] XMMSAS src. selection expression = ellipse(25047.854000, 39341.086000, 1413.198041, 1413.198041, 0.000000, X, Y)
[Fri May  3 04:51:06 2013] Not overwriting source region fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src27_src.reg
[Fri May  3 04:51:06 2013] Extracting stamp from image fullrun_pn_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (207, 372) - (370, 534)
[Fri May  3 04:51:06 2013] XMMSAS bgd. selection expression = annulus(25047.854000, 39341.086000, 2355.330068, 4710.660136, X, Y) && !ellipse(22382.690000, 37516.200000, 11674.416336, 11674.416336, 0.000000, X, Y) && !ellipse(21638.210200, 37732.660200, 1841.520053, 1273.008037, 33.734000, X, Y) && !ellipse(22001.888000, 38370.930000, 1545.056044, 1545.056044, 209.339000, X, Y) && !ellipse(20911.346024, 39187.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21699.244553, 39010.958191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22569.102509, 38570.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.452698, 38145.439880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22563.585358, 40151.691528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27561.263824, 38925.973358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26656.005035, 38829.537384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25673.926000, 38495.126000, 1890.880054, 1890.880054, 0.000000, X, Y) && !ellipse(25311.301727, 38836.010345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.227000, 38672.194200, 794.123223, 794.123223, 0.000000, X, Y) && !ellipse(24848.923065, 38572.034058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.209839, 38228.337860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.106000, 38427.218000, 1619.032047, 1619.032047, 0.000000, X, Y) && !ellipse(27565.998000, 38056.589000, 1390.016040, 1390.016040, 0.000000, X, Y) && !ellipse(30012.195709, 38060.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20066.762619, 38240.673126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.936157, 37894.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.877167, 37714.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20259.996979, 37716.517242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27966.660000, 37556.902000, 1782.352051, 1782.352051, 0.000000, X, Y) && !ellipse(19530.734772, 38068.414825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33182.966000, 37220.894000, 10818.864311, 10818.864311, 0.000000, X, Y) && !ellipse(26635.986000, 37675.674000, 3101.616089, 1648.432047, 84.780000, X, Y) && !ellipse(25536.216000, 36893.430000, 1780.232051, 1780.232051, 0.000000, X, Y) && !ellipse(33467.710000, 37476.472000, 11064.144318, 11064.144318, 0.000000, X, Y) && !ellipse(28487.457520, 36925.772522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32036.392000, 36276.674000, 11490.288331, 11490.288331, 0.000000, X, Y) && !ellipse(28541.350000, 36293.752000, 3560.464102, 3560.464102, 0.000000, X, Y) && !ellipse(20174.866119, 36934.998749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25788.330841, 37189.682434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.872711, 37190.781616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31548.222000, 35631.224000, 11077.968319, 11077.968319, 0.000000, X, Y) && !ellipse(20617.280289, 36184.302490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30376.792000, 36710.768000, 1604.784046, 1604.784046, 0.000000, X, Y) && !ellipse(20557.828873, 35547.714081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29039.516400, 35908.647200, 1729.128050, 1729.128050, 0.000000, X, Y) && !ellipse(29377.025085, 35716.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.474000, 35732.866000, 11283.024325, 11283.024325, 0.000000, X, Y) && !ellipse(20525.922058, 34225.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21155.530396, 34240.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22054.702200, 33677.683400, 1603.544046, 1603.544046, 0.000000, X, Y) && !ellipse(22819.861200, 33552.162280, 1574.536045, 1574.536045, 0.000000, X, Y) && !ellipse(22906.130000, 40359.831400, 2003.600058, 2003.600058, 0.000000, X, Y) && !ellipse(28560.454000, 40291.230000, 1956.544056, 1956.544056, 0.000000, X, Y) && !ellipse(27554.145691, 40139.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25436.446533, 39609.069916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.211304, 39459.721863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30115.423248, 38675.073090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21924.102966, 35324.744720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21842.833847, 34660.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30737.862000, 34240.842000, 10374.768299, 10374.768299, 0.000000, X, Y)
[Fri May  3 04:51:06 2013] Writing fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src27.gif