[Fri May  3 04:41:09 2013] Detection parameters:
  Position = (154.2, 303.2) = 6 17 55.22 22 42 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1153.0 +/- 57.2
  Background counts = 680.1
  Rate = 0.01 +/- 0.0007

[Fri May  3 04:41:57 2013] Off-axis axis estimate = 10.46'
[Fri May  3 04:45:42 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:42 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Fri May  3 04:45:42 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.890
[Fri May  3 04:45:42 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 11.66"
[Fri May  3 04:45:44 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src17.ximg exists
[Fri May  3 04:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src17.csv
[Fri May  3 04:45:44 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri May  3 04:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src17.csv
[Fri May  3 04:45:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:47 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri May  3 04:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May  3 04:45:47 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri May  3 04:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May  3 04:45:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:46:35 2013] Warning, spatial fit 17 centroid is now closest to src. 243
[Fri May  3 04:46:36 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:36 2013] Assessing source extent using major
[Fri May  3 04:46:36 2013] Source does appear to be extended
[Fri May  3 04:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:48:25 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:25 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Fri May  3 04:48:25 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.890
[Fri May  3 04:48:25 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 11.66"
[Fri May  3 04:48:26 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src17.ximg exists
[Fri May  3 04:48:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src17.csv
[Fri May  3 04:48:26 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May  3 04:48:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src17.csv
[Fri May  3 04:48:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:29 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May  3 04:48:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri May  3 04:48:29 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May  3 04:48:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri May  3 04:48:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:49:10 2013] Warning, spatial fit 17 centroid is now closest to src. 243
[Fri May  3 04:49:11 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:11 2013] Assessing source extent using major
[Fri May  3 04:49:11 2013] Source does appear to be extended
[Fri May  3 04:49:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:51:05 2013] Counts = 1152.981689, rescaling region sizes by 2.000000
[Fri May  3 04:51:05 2013] XMMSAS src. selection expression = ellipse(13367.466583, 26332.136597, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May  3 04:51:05 2013] Not overwriting source region fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src23_src.reg
[Fri May  3 04:51:05 2013] Extracting stamp from image fullrun_pn_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (79, 228) - (229, 378)
[Fri May  3 04:51:05 2013] XMMSAS bgd. selection expression = annulus(13367.466583, 26332.136597, 4350.000000, 8700.000000, X, Y) && !ellipse(22382.690000, 37516.200000, 11674.416336, 11674.416336, 0.000000, X, Y) && !ellipse(15971.174164, 34318.053192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18669.382202, 28656.763428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17516.223328, 28925.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20474.756989, 29460.470001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32036.392000, 36276.674000, 11490.288331, 11490.288331, 0.000000, X, Y) && !ellipse(31548.222000, 35631.224000, 11077.968319, 11077.968319, 0.000000, X, Y) && !ellipse(20557.828873, 35547.714081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14709.171036, 34926.564667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.474000, 35732.866000, 11283.024325, 11283.024325, 0.000000, X, Y) && !ellipse(20525.922058, 34225.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21155.530396, 34240.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14412.850000, 33518.054000, 1310.936038, 1310.936038, 0.000000, X, Y) && !ellipse(22054.702200, 33677.683400, 1603.544046, 1603.544046, 0.000000, X, Y) && !ellipse(21653.399600, 33388.612400, 638.764018, 638.764018, 0.000000, X, Y) && !ellipse(15518.523529, 33268.774994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14992.338000, 33123.818000, 1900.632055, 1900.632055, 0.000000, X, Y) && !ellipse(22819.861200, 33552.162280, 1574.536045, 1574.536045, 0.000000, X, Y) && !ellipse(14763.192917, 32751.917786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21255.180000, 32574.680000, 1572.432045, 1572.432045, 0.000000, X, Y) && !ellipse(17428.036530, 32819.798920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14323.352798, 32228.229187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14936.038800, 31648.314400, 1843.016053, 1843.016053, 0.000000, X, Y) && !ellipse(14146.327393, 31543.173218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13371.544708, 31616.311310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14623.201187, 31533.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12635.760000, 31385.372000, 1992.424057, 1992.424057, 0.000000, X, Y) && !ellipse(14198.899628, 31015.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12458.676000, 31047.220000, 2006.256058, 2006.256058, 0.000000, X, Y) && !ellipse(11729.412000, 30336.656000, 1995.368057, 1995.368057, 0.000000, X, Y) && !ellipse(10453.064819, 29804.484802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23284.899600, 29493.546400, 1321.712038, 1321.712038, 0.000000, X, Y) && !ellipse(22514.777954, 28786.397888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21705.906200, 28408.529669, 4135.728119, 3979.545323, 79.459015, X, Y) && !ellipse(22390.804016, 27874.445770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17145.441849, 27781.578156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21207.744000, 27027.587800, 762.901622, 762.901622, 0.000000, X, Y) && !ellipse(22306.281158, 26914.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13205.236328, 24401.439117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17315.483200, 23478.941223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16925.905441, 22917.431732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9779.459991, 22831.100800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9036.153343, 22665.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11184.198822, 21705.259521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12210.921219, 17854.097046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10897.863205, 17720.125595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12226.591202, 17347.342224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21867.226929, 17184.693802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15585.225830, 17431.802689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12779.726730, 17187.359451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21924.102966, 35324.744720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14998.610000, 34766.652000, 1987.232057, 1987.232057, 0.000000, X, Y) && !ellipse(21842.833847, 34660.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18168.841476, 34486.578522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30737.862000, 34240.842000, 10374.768299, 10374.768299, 0.000000, X, Y) && !ellipse(17807.497299, 33155.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17046.826096, 33250.980988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16407.082184, 33451.252502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22289.796082, 32945.458801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11384.822000, 30057.216000, 2006.256058, 2006.256058, 0.000000, X, Y) && !ellipse(21520.507980, 29427.725525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21199.468475, 27614.027222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22171.004761, 27342.157532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20572.377106, 27373.632904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14241.429214, 26574.830170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21450.659470, 25927.406586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22048.173813, 25885.409332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14819.437057, 25183.979797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16558.077682, 24479.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16767.465240, 24043.007507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15255.743332, 23683.564331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16668.499023, 23519.990631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17842.187912, 23362.698730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15613.674469, 22925.909241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14968.516953, 22572.790344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16827.699890, 22138.305420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15259.093979, 22143.668579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16050.904694, 21979.853271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22331.867676, 18300.423401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15599.050568, 18029.809540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21418.678314, 17528.303711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21983.142853, 17880.452194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21032.301193, 17213.348206, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:51:05 2013] Writing fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src23.gif