[Fri May  3 04:41:21 2013] Detection parameters:
  Position = (138.6, 352.0) = 6 18 0.14 22 45 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 309.9 +/- 43.3
  Background counts = 518.2
  Rate = 0.004 +/- 0.0005

[Fri May  3 04:41:57 2013] Off-axis axis estimate = 12.22'
[Fri May  3 04:45:42 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 04:45:42 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Fri May  3 04:45:42 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.918
[Fri May  3 04:45:42 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 12.54"
[Fri May  3 04:45:46 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src91.ximg exists
[Fri May  3 04:45:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src91.csv
[Fri May  3 04:45:46 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src91_1.ximg exists
[Fri May  3 04:45:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src91.csv
[Fri May  3 04:45:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:49 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Fri May  3 04:45:49 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Fri May  3 04:45:49 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Fri May  3 04:46:36 2013] Warning, spatial fit 91 centroid is now closest to src. 211
[Fri May  3 04:46:36 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:36 2013] Assessing source extent using major
[Fri May  3 04:46:36 2013] Source does appear to be extended
[Fri May  3 04:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:46:37 2013] Source is confused with source 99
[Fri May  3 04:48:25 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:25 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Fri May  3 04:48:25 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.918
[Fri May  3 04:48:25 2013] Giving source the simple spatial ID 87 for pass 1, mean size = 12.54"
[Fri May  3 04:48:28 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src87.ximg exists
[Fri May  3 04:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src87.csv
[Fri May  3 04:48:28 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src87_1.ximg exists
[Fri May  3 04:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src87.csv
[Fri May  3 04:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:31 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Fri May  3 04:48:31 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Fri May  3 04:48:31 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Fri May  3 04:49:11 2013] Warning: source 82 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 101 at 15.058666 pixels away
[Fri May  3 04:49:11 2013] Spatial fit model total counts = 6904.310000, observed total counts = 6898.000000
[Fri May  3 04:49:11 2013] Offset between fit and detection position for source 101 = 4.256513 pixels
[Fri May  3 04:49:11 2013] Warning, changing simple spatial fit ID from 87 to 85
[Fri May  3 04:49:11 2013] 5906.787000 total counts/ 5308.540000 bgd. counts: snr = 8.210942
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 4.256513 pixels
  Position = (135.4, 349.3) = 6 18 1.16 22 45 34.8
  Extent = 24.9 (24.9-49.9)", rotation angle = 0
  Source counts = 598.2 +/- 76.9
  Background counts = 5308.5
  Rate = 0.01 +/- 0.002
[Fri May  3 04:49:11 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:11 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:11 2013] Source does appear to be extended
[Fri May  3 04:49:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:51:17 2013] XMMSAS src. selection expression = ellipse(11729.412000, 30336.656000, 1496.526043, 1496.526043, 0.000000, X, Y)
[Fri May  3 04:51:17 2013] Not overwriting source region fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src101_src.reg
[Fri May  3 04:51:17 2013] Extracting stamp from image fullrun_pn_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (49, 263) - (221, 435)
[Fri May  3 04:51:17 2013] XMMSAS bgd. selection expression = annulus(11729.412000, 30336.656000, 2494.210072, 4988.420144, X, Y) && !ellipse(22382.690000, 37516.200000, 11674.416336, 11674.416336, 0.000000, X, Y) && !ellipse(15971.174164, 34318.053192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17516.223328, 28925.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13367.466583, 26332.136597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14709.171036, 34926.564667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14412.850000, 33518.054000, 1310.936038, 1310.936038, 0.000000, X, Y) && !ellipse(15518.523529, 33268.774994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14992.338000, 33123.818000, 1900.632055, 1900.632055, 0.000000, X, Y) && !ellipse(14763.192917, 32751.917786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17428.036530, 32819.798920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14323.352798, 32228.229187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14936.038800, 31648.314400, 1843.016053, 1843.016053, 0.000000, X, Y) && !ellipse(14146.327393, 31543.173218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13371.544708, 31616.311310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14623.201187, 31533.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12635.760000, 31385.372000, 1992.424057, 1992.424057, 0.000000, X, Y) && !ellipse(14198.899628, 31015.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12458.676000, 31047.220000, 2006.256058, 2006.256058, 0.000000, X, Y) && !ellipse(10453.064819, 29804.484802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17145.441849, 27781.578156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14998.610000, 34766.652000, 1987.232057, 1987.232057, 0.000000, X, Y) && !ellipse(17046.826096, 33250.980988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16407.082184, 33451.252502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11384.822000, 30057.216000, 2006.256058, 2006.256058, 0.000000, X, Y) && !ellipse(14241.429214, 26574.830170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14819.437057, 25183.979797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16558.077682, 24479.220856, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:51:17 2013] Writing fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src101.gif