[Fri May  3 04:41:21 2013] Detection parameters:
  Position = (334.9, 348.9) = 6 16 58.40 22 45 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 859.6 +/- 78.0
  Background counts = 2737.4
  Rate = 0.01 +/- 0.001

[Fri May  3 04:41:57 2013] Off-axis axis estimate = 4.52'
[Fri May  3 04:45:42 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:42 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Fri May  3 04:45:42 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.002
[Fri May  3 04:45:42 2013] Giving source the simple spatial ID 90 for pass 0, mean size = 8.69"
[Fri May  3 04:45:46 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src90.ximg exists
[Fri May  3 04:45:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src90.csv
[Fri May  3 04:45:46 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src90_1.ximg exists
[Fri May  3 04:45:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src90.csv
[Fri May  3 04:45:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:49 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Fri May  3 04:45:49 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Fri May  3 04:45:49 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Fri May  3 04:46:36 2013] Warning, spatial fit 90 centroid is now closest to src. 104
[Fri May  3 04:46:36 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:36 2013] Assessing source extent using major
[Fri May  3 04:46:36 2013] Source does appear to be extended
[Fri May  3 04:46:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:46:37 2013] Source is confused with source 104
[Fri May  3 04:48:25 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:25 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Fri May  3 04:48:25 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.002
[Fri May  3 04:48:25 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 8.69"
[Fri May  3 04:48:28 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src86.ximg exists
[Fri May  3 04:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src86.csv
[Fri May  3 04:48:28 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src86_1.ximg exists
[Fri May  3 04:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src86.csv
[Fri May  3 04:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:31 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Fri May  3 04:48:31 2013] fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Fri May  3 04:48:31 2013] Fit fullrun_pn_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src86 appears to have run properly
[Fri May  3 04:49:11 2013] Warning, spatial fit 86 centroid is now closest to src. 104
[Fri May  3 04:49:11 2013] Spatial fit model total counts = 116021.000000, observed total counts = 100286.000000
[Fri May  3 04:49:11 2013] Poor agreement between spatial fit and data for source 100
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 04:49:11 2013] Spatial fit model total counts = 37862.600000, observed total counts = 23279.000000
[Fri May  3 04:49:11 2013] Poor agreement between spatial fit and data for source 100
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 04:49:11 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:11 2013] Assessing source extent using major
[Fri May  3 04:49:11 2013] Source does appear to be extended
[Fri May  3 04:49:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:51:17 2013] XMMSAS src. selection expression = ellipse(29091.686432, 30307.761536, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 04:51:17 2013] Not overwriting source region fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src100_src.reg
[Fri May  3 04:51:17 2013] Extracting stamp from image fullrun_pn_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (297, 311) - (372, 386)
[Fri May  3 04:51:17 2013] XMMSAS bgd. selection expression = annulus(29091.686432, 30307.761536, 1087.500000, 2175.000000, X, Y) && !ellipse(28964.937988, 28147.459778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.675323, 28981.494751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22382.690000, 37516.200000, 11674.416336, 11674.416336, 0.000000, X, Y) && !ellipse(29480.836731, 28116.964111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30702.410400, 29016.416351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33182.966000, 37220.894000, 10818.864311, 10818.864311, 0.000000, X, Y) && !ellipse(33467.710000, 37476.472000, 11064.144318, 11064.144318, 0.000000, X, Y) && !ellipse(32036.392000, 36276.674000, 11490.288331, 11490.288331, 0.000000, X, Y) && !ellipse(31548.222000, 35631.224000, 11077.968319, 11077.968319, 0.000000, X, Y) && !ellipse(30742.474000, 35732.866000, 11283.024325, 11283.024325, 0.000000, X, Y) && !ellipse(30103.380035, 31782.887848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29523.816345, 30921.442352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.234000, 29840.318000, 1389.928040, 1389.928040, 0.000000, X, Y) && !ellipse(29415.082275, 29180.664429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.012000, 28591.598000, 3841.512111, 3841.512111, 0.000000, X, Y) && !ellipse(30737.862000, 34240.842000, 10374.768299, 10374.768299, 0.000000, X, Y) && !ellipse(30812.079041, 31882.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.071808, 31685.185425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25907.768000, 31599.980000, 1381.096040, 1381.096040, 0.000000, X, Y) && !ellipse(30460.866455, 31272.678833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.682465, 30198.950470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26947.768860, 29627.811188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.596222, 28056.440063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28702.360901, 27630.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.080261, 27532.860321, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:51:17 2013] Writing fullrun_pn_xmm0600110101_pi300-10000_pass1_cl_src100.gif