[Fri May 3 04:42:33 2013] Detection parameters: Position = (257.0, 431.9) = 6 17 22.92 22 51 36.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1443.0 +/- 59.4 Background counts = 545.0 Rate = 0.02 +/- 0.0007 [Fri May 3 04:43:25 2013] Off-axis axis estimate = 10.13' [Fri May 3 04:45:55 2013] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting [Fri May 3 04:45:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 3 04:45:55 2013] Initial guess for spatial extent in simple fitting = 11.49" [Fri May 3 04:45:55 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.912 [Fri May 3 04:45:55 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 11.49" [Fri May 3 04:45:56 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src16.ximg exists [Fri May 3 04:45:56 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src16_1.ximg exists [Fri May 3 04:45:56 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src16 appears to have run properly [Fri May 3 04:45:59 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists [Fri May 3 04:45:59 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists [Fri May 3 04:45:59 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly [Fri May 3 04:47:16 2013] Warning, spatial fit 16 centroid is now closest to src. 165 [Fri May 3 04:47:17 2013] Spatial fit model total counts = 10828.800000, observed total counts = 10828.000000 [Fri May 3 04:47:17 2013] Offset between fit and detection position for source 6 = 1.093622 pixels [Fri May 3 04:47:17 2013] Warning, changing simple spatial fit ID from 16 to 31 [Fri May 3 04:47:17 2013] 10502.666000 total counts/ 9871.480000 bgd. counts: snr = 6.352815 Spatial fit parameters: Offset between fit and detection position for source 6 = 1.093622 pixels Position = (257.9, 431.2) = 6 17 22.65 22 51 31.8 Extent = 16.9" x 5.7", rotation angle = 6 Source counts = 631.2 +/- 102.5 Background counts = 9871.5 Rate = 0.008 +/- 0.001 [Fri May 3 04:47:18 2013] Vigneting correction estimate = 1.000000 [Fri May 3 04:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 04:47:18 2013] Assessing source extent using major [Fri May 3 04:47:18 2013] Source does appear to be extended [Fri May 3 04:47:18 2013] Computing asymmetry using major and minor axis, asym = 2.98 [Fri May 3 04:47:18 2013] Source is asymmetric [Fri May 3 04:47:18 2013] Source is confused with source 8 [Fri May 3 04:47:18 2013] Source is confused with source 7 [Fri May 3 04:47:18 2013] Source is confused with source 10 [Fri May 3 04:47:18 2013] Source is confused with source 14 [Fri May 3 04:47:18 2013] Source is confused with source 13 [Fri May 3 04:47:18 2013] Source is confused with source 70 [Fri May 3 04:48:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 3 04:48:37 2013] Initial guess for spatial extent in simple fitting = 11.29" [Fri May 3 04:48:37 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939 [Fri May 3 04:48:37 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 11.29" [Fri May 3 04:48:38 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src15.ximg exists [Fri May 3 04:48:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src15.csv [Fri May 3 04:48:38 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src15_1.ximg exists [Fri May 3 04:48:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src15.csv [Fri May 3 04:48:38 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 04:48:41 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Fri May 3 04:48:41 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Fri May 3 04:48:41 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly [Fri May 3 04:49:57 2013] Warning, spatial fit 15 centroid is now closest to src. 70 [Fri May 3 04:49:57 2013] Spatial fit model total counts = 34681.200000, observed total counts = 34690.000000 [Fri May 3 04:49:57 2013] Offset between fit and detection position for source 6 = 0.627898 pixels [Fri May 3 04:49:57 2013] Warning, changing simple spatial fit ID from 15 to 43 [Fri May 3 04:49:57 2013] 31621.545000 total counts/ 30910.000000 bgd. counts: snr = 4.047183 Spatial fit parameters: Offset between fit and detection position for source 6 = 0.627898 pixels Position = (258.2, 430.7) = 6 17 22.55 22 51 29.4 Extent = 9.4 (7.9-11.5)", rotation angle = 0 Source counts = 711.5 +/- 177.8 Background counts = 30910.0 Rate = 0.009 +/- 0.002 [Fri May 3 04:49:58 2013] Vigneting correction estimate = 1.000000 [Fri May 3 04:49:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 04:49:58 2013] Assessing source extent using major axis lower bound [Fri May 3 04:49:58 2013] Source does appear to be extended [Fri May 3 04:49:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 04:53:36 2013] XMMSAS src. selection expression = ellipse(22411.932000, 37418.784000, 561.531616, 561.531616, 0.000000, X, Y) [Fri May 3 04:53:36 2013] Not overwriting source region fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src6_src.reg [Fri May 3 04:53:36 2013] Extracting stamp from image fullrun_mos2_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (226, 398) - (290, 463) [Fri May 3 04:53:36 2013] XMMSAS bgd. selection expression = annulus(22411.932000, 37418.784000, 935.886027, 1871.772054, X, Y) && !ellipse(29930.224000, 35952.962000, 10460.016301, 10460.016301, 0.000000, X, Y) && !ellipse(21460.980000, 37927.306000, 1827.608053, 1827.608053, 0.000000, X, Y) && !ellipse(29919.814000, 35733.222000, 10565.376304, 10565.376304, 0.000000, X, Y) && !ellipse(21971.292000, 37404.778000, 10965.648316, 10965.648316, 0.000000, X, Y) && !ellipse(22958.698000, 38400.700000, 1866.880054, 1866.880054, 0.000000, X, Y) && !ellipse(21903.304200, 38144.894000, 1903.208055, 1903.208055, 0.000000, X, Y) && !ellipse(24560.532000, 36632.842000, 1770.624051, 1770.624051, 0.000000, X, Y) && !ellipse(22661.828000, 36445.276000, 1799.000052, 1799.000052, 0.000000, X, Y) && !ellipse(21005.239807, 39187.878723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21301.717200, 37427.408000, 1872.496054, 592.489617, -0.000000, X, Y) && !ellipse(23642.812000, 38224.387200, 1863.360054, 1863.360054, 0.000000, X, Y) && !ellipse(22883.056000, 40280.959600, 1079.480031, 1079.480031, 0.000000, X, Y) && !ellipse(21218.961700, 36942.600098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23636.724304, 38913.489410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25592.218000, 36616.698000, 1768.392051, 993.696029, 5.467000, X, Y) && !ellipse(20558.116943, 38672.805695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19695.077103, 38670.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24182.810730, 38316.840607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26004.046000, 36846.540000, 2329.192067, 2329.192067, 0.000000, X, Y) && !ellipse(19960.278000, 39086.528000, 1974.544057, 1974.544057, 0.000000, X, Y) && !ellipse(24938.142670, 38143.095490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18584.900000, 38372.958000, 1991.408057, 1991.408057, 0.000000, X, Y) && !ellipse(22286.811829, 40074.347870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21602.726273, 36847.996094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20992.903214, 40050.542877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.078796, 37283.691711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21865.425491, 35320.597565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24733.612488, 39272.019257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24676.040833, 38833.573029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24379.059875, 39528.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.827515, 37998.207886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23530.552338, 39587.075653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23626.189148, 36921.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22742.024567, 39525.768372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21639.320541, 40006.068481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19982.596863, 37898.931030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24843.650177, 39954.191864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.984161, 40054.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19885.902023, 35358.856537, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 3 04:53:36 2013] Writing fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src6.gif