[Fri May  3 04:42:39 2013] Detection parameters:
  Position = (263.3, 463.1) = 6 17 20.93 22 53 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 729.4 +/- 44.3
  Background counts = 297.3
  Rate = 0.008 +/- 0.0005

[Fri May  3 04:43:25 2013] Off-axis axis estimate = 12.20'
[Fri May  3 04:45:55 2013] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 04:45:55 2013] Initial guess for spatial extent in simple fitting = 12.53"
[Fri May  3 04:45:55 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.919
[Fri May  3 04:45:55 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 12.53"
[Fri May  3 04:45:57 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src54.ximg exists
[Fri May  3 04:45:57 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri May  3 04:45:57 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src54 appears to have run properly
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri May  3 04:46:00 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Fri May  3 04:47:17 2013] Spatial fit model total counts = 5207.500000, observed total counts = 4877.000000
[Fri May  3 04:47:17 2013] Offset between fit and detection position for source 50 = 3.030630 pixels
[Fri May  3 04:47:17 2013] 4974.460000 total counts/ 2673.270000 bgd. counts: snr = 44.507281
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 3.030630 pixels
  Position = (266.3, 463.7) = 6 17 20.00 22 53 53.3
  Extent = 25.1 (25.0-25.1)", rotation angle = 0
  Source counts = 2301.2 +/- 70.5
  Background counts = 2673.3
  Rate = 0.03 +/- 0.0008
[Fri May  3 04:47:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:47:18 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:47:18 2013] Source does appear to be extended
[Fri May  3 04:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:47:18 2013] Source is confused with source 20
[Fri May  3 04:47:18 2013] Source is confused with source 17
[Fri May  3 04:47:18 2013] Source is confused with source 97
[Fri May  3 04:47:18 2013] Source is confused with source 52
[Fri May  3 04:47:18 2013] Source is confused with source 53
[Fri May  3 04:47:18 2013] Source is confused with source 99
[Fri May  3 04:47:18 2013] Source is confused with source 142
[Fri May  3 04:47:18 2013] Source is confused with source 140
[Fri May  3 04:48:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 04:48:37 2013] Initial guess for spatial extent in simple fitting = 25.05"
[Fri May  3 04:48:37 2013] source mask rpix=5.8, npix_max = 156, mask sum = 157, frac = 1.002
[Fri May  3 04:48:37 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 25.05"
[Fri May  3 04:48:39 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src53.ximg exists
[Fri May  3 04:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src53.csv
[Fri May  3 04:48:39 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri May  3 04:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src53.csv
[Fri May  3 04:48:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri May  3 04:48:42 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri May  3 04:49:57 2013] Spatial fit model total counts = 19634.700000, observed total counts = 19175.000000
[Fri May  3 04:49:57 2013] Offset between fit and detection position for source 50 = 2.726622 pixels
[Fri May  3 04:49:57 2013] 18875.765000 total counts/ 18146.200000 bgd. counts: snr = 5.415906
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 2.726622 pixels
  Position = (263.6, 463.6) = 6 17 20.85 22 53 52.5
  Extent = 13.5 (11.1-16.2)", rotation angle = 0
  Source counts = 729.6 +/- 137.4
  Background counts = 18146.2
  Rate = 0.009 +/- 0.002
[Fri May  3 04:49:58 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:58 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:58 2013] Source does appear to be extended
[Fri May  3 04:49:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:53:44 2013] XMMSAS src. selection expression = ellipse(22883.056000, 40280.959600, 809.610023, 809.610023, 0.000000, X, Y)
[Fri May  3 04:53:44 2013] Not overwriting source region fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src50_src.reg
[Fri May  3 04:53:44 2013] Extracting stamp from image fullrun_mos2_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (217, 417) - (310, 510)
[Fri May  3 04:53:44 2013] XMMSAS bgd. selection expression = annulus(22883.056000, 40280.959600, 1349.350039, 2698.700078, X, Y) && !ellipse(29015.094000, 36039.596000, 3574.216103, 3574.216103, 0.000000, X, Y) && !ellipse(22411.932000, 37418.784000, 748.708822, 748.708822, 0.000000, X, Y) && !ellipse(29930.224000, 35952.962000, 10460.016301, 10460.016301, 0.000000, X, Y) && !ellipse(21460.980000, 37927.306000, 1827.608053, 1827.608053, 0.000000, X, Y) && !ellipse(29919.814000, 35733.222000, 10565.376304, 10565.376304, 0.000000, X, Y) && !ellipse(21971.292000, 37404.778000, 10965.648316, 10965.648316, 0.000000, X, Y) && !ellipse(22958.698000, 38400.700000, 1866.880054, 1866.880054, 0.000000, X, Y) && !ellipse(21903.304200, 38144.894000, 1903.208055, 1903.208055, 0.000000, X, Y) && !ellipse(24560.532000, 36632.842000, 1770.624051, 1770.624051, 0.000000, X, Y) && !ellipse(22661.828000, 36445.276000, 1799.000052, 1799.000052, 0.000000, X, Y) && !ellipse(21005.239807, 39187.878723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21301.717200, 37427.408000, 1872.496054, 592.489617, -0.000000, X, Y) && !ellipse(23642.812000, 38224.387200, 1863.360054, 1863.360054, 0.000000, X, Y) && !ellipse(27381.382000, 38501.208000, 2807.776081, 2807.776081, 0.000000, X, Y) && !ellipse(21218.961700, 36942.600098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23636.724304, 38913.489410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25592.218000, 36616.698000, 1768.392051, 993.696029, 5.467000, X, Y) && !ellipse(20558.116943, 38672.805695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19695.077103, 38670.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.312000, 37529.594000, 1765.384051, 608.025617, -0.000000, X, Y) && !ellipse(24182.810730, 38316.840607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26004.046000, 36846.540000, 2329.192067, 2329.192067, 0.000000, X, Y) && !ellipse(25179.182159, 38581.042572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.794000, 38688.498000, 1518.096044, 1518.096044, 0.000000, X, Y) && !ellipse(19960.278000, 39086.528000, 1974.544057, 1974.544057, 0.000000, X, Y) && !ellipse(24938.142670, 38143.095490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18584.900000, 38372.958000, 1991.408057, 1991.408057, 0.000000, X, Y) && !ellipse(25978.149506, 37377.209808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.811829, 40074.347870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21602.726273, 36847.996094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20992.903214, 40050.542877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.078796, 37283.691711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23416.813538, 40225.907562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24733.612488, 39272.019257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.213043, 37604.610413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24676.040833, 38833.573029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24379.059875, 39528.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.827515, 37998.207886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25993.543365, 38311.419037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.068000, 38888.440000, 1861.856054, 1861.856054, 0.000000, X, Y) && !ellipse(23530.552338, 39587.075653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19604.348114, 37982.670654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23626.189148, 36921.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22742.024567, 39525.768372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21639.320541, 40006.068481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19982.596863, 37898.931030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24843.650177, 39954.191864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.992035, 39594.934540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.984161, 40054.196198, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:53:44 2013] Writing fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src50.gif