[Fri May  3 04:42:39 2013] Detection parameters:
  Position = (314.1, 294.0) = 6 17 4.96 22 41 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1129.4 +/- 62.9
  Background counts = 1916.6
  Rate = 0.02 +/- 0.0009

[Fri May  3 04:43:25 2013] Off-axis axis estimate = 1.18'
[Fri May  3 04:45:55 2013] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:55 2013] Initial guess for spatial extent in simple fitting = 7.02"
[Fri May  3 04:45:55 2013] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.784
[Fri May  3 04:45:55 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.02"
[Fri May  3 04:45:56 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src17.ximg exists
[Fri May  3 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src17.csv
[Fri May  3 04:45:56 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri May  3 04:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src17.csv
[Fri May  3 04:45:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:59 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri May  3 04:45:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May  3 04:45:59 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri May  3 04:45:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May  3 04:45:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:47:16 2013] Warning, spatial fit 17 centroid is now closest to src. 1
[Fri May  3 04:47:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:47:18 2013] Assessing source extent using major
[Fri May  3 04:47:18 2013] Source does appear to be extended
[Fri May  3 04:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:48:37 2013] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:37 2013] Initial guess for spatial extent in simple fitting = 7.02"
[Fri May  3 04:48:37 2013] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.784
[Fri May  3 04:48:37 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 7.02"
[Fri May  3 04:48:38 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src16.ximg exists
[Fri May  3 04:48:38 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri May  3 04:48:38 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src16 appears to have run properly
[Fri May  3 04:48:41 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri May  3 04:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May  3 04:48:41 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri May  3 04:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May  3 04:48:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:49:57 2013] Warning, spatial fit 16 centroid is now closest to src. 272
[Fri May  3 04:49:58 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:58 2013] Assessing source extent using major
[Fri May  3 04:49:58 2013] Source does appear to be extended
[Fri May  3 04:49:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:53:36 2013] Counts = 1129.441040, rescaling region sizes by 2.000000
[Fri May  3 04:53:36 2013] XMMSAS src. selection expression = ellipse(27277.948303, 25529.399109, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May  3 04:53:36 2013] Not overwriting source region fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src48_src.reg
[Fri May  3 04:53:36 2013] Extracting stamp from image fullrun_mos2_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (239, 219) - (389, 369)
[Fri May  3 04:53:37 2013] XMMSAS bgd. selection expression = annulus(27277.948303, 25529.399109, 4350.000000, 8700.000000, X, Y) && !ellipse(24917.464000, 30602.890000, 1111.160032, 1111.160032, 0.000000, X, Y) && !ellipse(27418.139160, 26231.957031, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23391.114000, 26529.782000, 1674.624048, 1674.624048, 0.000000, X, Y) && !ellipse(29140.398254, 31542.976746, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24352.860046, 26742.351898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.031311, 26904.672424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20529.393509, 29413.773346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24256.296631, 27350.303162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24790.852000, 27685.290000, 950.576027, 950.576027, 0.000000, X, Y) && !ellipse(17453.640600, 28967.019000, 1639.576047, 1639.576047, 0.000000, X, Y) && !ellipse(29015.094000, 36039.596000, 3574.216103, 3574.216103, 0.000000, X, Y) && !ellipse(31144.371600, 31957.245000, 723.973621, 723.973621, 0.000000, X, Y) && !ellipse(29180.668000, 35761.240000, 3321.024096, 3321.024096, 0.000000, X, Y) && !ellipse(29930.224000, 35952.962000, 10460.016301, 10460.016301, 0.000000, X, Y) && !ellipse(30711.928680, 31609.835693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29557.659600, 35014.130000, 1101.256032, 1101.256032, 0.000000, X, Y) && !ellipse(24396.652100, 27452.752777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28266.886000, 29880.854000, 1346.064039, 1346.064039, 0.000000, X, Y) && !ellipse(29919.814000, 35733.222000, 10565.376304, 10565.376304, 0.000000, X, Y) && !ellipse(21971.292000, 37404.778000, 10965.648316, 10965.648316, 0.000000, X, Y) && !ellipse(21388.504000, 28737.114000, 2716.160078, 2716.160078, 0.000000, X, Y) && !ellipse(28790.263611, 29712.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21955.744000, 28318.112000, 1358.080039, 1358.080039, 0.000000, X, Y) && !ellipse(21837.984000, 33416.775400, 1150.080033, 1150.080033, 0.000000, X, Y) && !ellipse(31313.552000, 34686.918000, 1742.352050, 253.216807, 359.706000, X, Y) && !ellipse(30657.880000, 36211.346000, 2299.936066, 2299.936066, 0.000000, X, Y) && !ellipse(30816.943054, 31541.532410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22376.817322, 18376.926743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29690.370000, 30889.014000, 1460.976042, 1460.976042, 0.000000, X, Y) && !ellipse(28286.819611, 25682.501373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23478.429600, 26895.565200, 1206.608035, 1206.608035, 0.000000, X, Y) && !ellipse(31284.920000, 35267.220000, 1775.184051, 524.752015, 5.374250, X, Y) && !ellipse(34074.241852, 21400.476761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31458.824400, 25723.082260, 683.154420, 683.154420, 0.000000, X, Y) && !ellipse(31327.475983, 16563.427567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28575.758000, 35154.252200, 1660.512048, 1660.512048, 0.000000, X, Y) && !ellipse(31379.966400, 16163.072000, 1748.648050, 1748.648050, 0.000000, X, Y) && !ellipse(22197.689600, 26888.780600, 1279.728037, 1279.728037, 0.000000, X, Y) && !ellipse(24500.584480, 18691.912200, 761.357622, 761.357622, 0.000000, X, Y) && !ellipse(31668.497000, 25308.102400, 1411.696041, 1411.696041, 0.000000, X, Y) && !ellipse(21199.723358, 33430.622925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23332.102000, 18817.246000, 1573.632045, 1573.632045, 0.000000, X, Y) && !ellipse(33919.243896, 20316.184036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22301.778000, 26921.535200, 1241.976036, 1241.976036, 0.000000, X, Y) && !ellipse(20713.860962, 34316.815948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32218.081540, 25657.417800, 1037.544030, 1037.544030, 0.000000, X, Y) && !ellipse(28243.717865, 25293.125397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31241.705000, 15565.188000, 3468.568100, 3468.568100, 0.000000, X, Y) && !ellipse(23809.340000, 30053.960000, 1075.656031, 1075.656031, 0.000000, X, Y) && !ellipse(29814.642944, 28837.220459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30065.112000, 31285.952000, 1285.608037, 1285.608037, 0.000000, X, Y) && !ellipse(32765.429230, 30727.025177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34727.400299, 19870.151062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22904.586700, 18314.200348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21045.044006, 32935.459961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.082000, 19247.646000, 3145.656091, 3145.656091, 0.000000, X, Y) && !ellipse(30128.520000, 28664.618000, 1353.392039, 1353.392039, -0.000000, X, Y) && !ellipse(29676.905334, 30143.691345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30967.785889, 33678.047760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34509.812683, 18564.666519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22351.483032, 33496.356140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22111.817520, 17881.288528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34248.807373, 31474.171661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.334198, 20236.268982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23154.990479, 27335.198700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31220.966000, 31947.860000, 862.704025, 862.704025, 0.000000, X, Y) && !ellipse(29938.831940, 28229.664795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.309448, 21433.161499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25100.545502, 26334.605774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29204.158783, 28932.514771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29225.263611, 27967.355865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.018311, 18579.536011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32024.819427, 16292.978317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33687.932434, 22141.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27334.426086, 23358.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25510.062531, 25779.561279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32314.838898, 25107.650360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32969.710000, 30499.212000, 1586.632046, 1586.632046, 0.000000, X, Y) && !ellipse(21465.498428, 17104.081802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29179.145752, 30219.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35012.972595, 20310.565994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17844.853561, 28327.245087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32505.342560, 30149.771362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30629.420990, 16485.728134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35482.254333, 19444.158249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27783.044000, 35071.002000, 1684.576048, 1684.576048, 0.000000, X, Y) && !ellipse(31818.205048, 34617.505981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30280.831573, 27708.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30273.923187, 33365.999512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32826.890503, 18398.781616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.600159, 25617.429260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25549.075531, 16664.776672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.996552, 25952.116943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.416016, 16837.554031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34545.490967, 21425.143311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33788.356262, 17868.770065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33425.254456, 20397.494308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23954.539276, 17900.367569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33505.149597, 18479.511765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30207.682861, 32940.900116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22348.490814, 33064.621826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.398590, 18234.615845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30164.915649, 30923.261047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34581.957794, 26598.566132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32569.708435, 32303.464752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28428.598175, 27456.578674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32427.998901, 16719.965439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30334.738000, 31945.594000, 2224.800064, 2224.800064, 0.000000, X, Y) && !ellipse(23003.133423, 25878.917786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34392.609070, 19273.442520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28620.968323, 28668.838501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21198.268402, 27611.273956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26607.285248, 25166.368988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29280.286438, 26470.288391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29982.164673, 26670.613007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31772.814667, 31178.016418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21235.051178, 34474.410522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22224.540771, 26042.836639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32495.927826, 24692.563080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21410.880493, 27009.445190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33511.120758, 19968.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.024719, 32761.279419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31029.717102, 28938.926666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32748.561829, 25195.598206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29977.197113, 34847.601440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18149.636322, 34238.184601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.252045, 27094.591980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33437.573792, 21615.451828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29905.498047, 27543.745941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20148.102097, 34384.548401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32803.847504, 22049.693817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32937.448578, 27919.129913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18382.272644, 28336.912048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33393.757843, 25806.355835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.906219, 34857.597626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32957.695831, 26463.372040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30418.792206, 34847.869598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.813293, 21393.898926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19027.471313, 34372.945923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31407.140137, 26477.794159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17896.811157, 32528.961700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17964.020569, 33418.866455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32121.796000, 35293.732000, 1781.344051, 1781.344051, 0.000000, X, Y)
[Fri May  3 04:53:37 2013] Writing fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src48.gif