[Fri May  3 04:43:22 2013] Detection parameters:
  Position = (360.2, 183.1) = 6 16 50.49 22 33 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.7 +/- 38.0
  Background counts = 436.1
  Rate = 0.007 +/- 0.0008

[Fri May  3 04:43:25 2013] Off-axis axis estimate = 9.49'
[Fri May  3 04:45:55 2013] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:55 2013] Initial guess for spatial extent in simple fitting = 11.17"
[Fri May  3 04:45:55 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.956
[Fri May  3 04:45:55 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 11.17"
[Fri May  3 04:45:58 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src70.ximg exists
[Fri May  3 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src70.csv
[Fri May  3 04:45:58 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src70_1.ximg exists
[Fri May  3 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src70.csv
[Fri May  3 04:45:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Fri May  3 04:46:00 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Fri May  3 04:47:17 2013] Spatial fit model total counts = 5748.260000, observed total counts = 5743.000000
[Fri May  3 04:47:17 2013] Offset between fit and detection position for source 355 = 3.437514 pixels
[Fri May  3 04:47:17 2013] Warning, changing simple spatial fit ID from 70 to 65
[Fri May  3 04:47:17 2013] 5771.220000 total counts/ 4779.450000 bgd. counts: snr = 14.345709
Spatial fit parameters:
  Offset between fit and detection position for source 355 = 3.437514 pixels
  Position = (361.2, 186.3) = 6 16 50.16 22 33 46.6
  Extent = 21.9 (21.9-21.9)", rotation angle = 0
  Source counts = 991.8 +/- 76.0
  Background counts = 4779.4
  Rate = 0.01 +/- 0.0009
[Fri May  3 04:47:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:47:18 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:47:18 2013] Source does appear to be extended
[Fri May  3 04:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:47:18 2013] Source is confused with source 343
[Fri May  3 04:48:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:37 2013] Initial guess for spatial extent in simple fitting = 21.86"
[Fri May  3 04:48:37 2013] source mask rpix=5.0, npix_max = 122, mask sum = 121, frac = 0.991
[Fri May  3 04:48:37 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 21.86"
[Fri May  3 04:48:40 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src69.ximg exists
[Fri May  3 04:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src69.csv
[Fri May  3 04:48:40 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src69_1.ximg exists
[Fri May  3 04:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src69.csv
[Fri May  3 04:48:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Fri May  3 04:48:42 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Fri May  3 04:49:57 2013] Warning, spatial fit 69 centroid is now closest to src. 358
[Fri May  3 04:49:58 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:58 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:58 2013] Source does appear to be extended
[Fri May  3 04:49:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:53:46 2013] XMMSAS src. selection expression = ellipse(31379.966400, 16163.072000, 1311.486038, 1311.486038, 0.000000, X, Y)
[Fri May  3 04:53:46 2013] Not overwriting source region fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src355_src.reg
[Fri May  3 04:53:46 2013] Extracting stamp from image fullrun_mos2_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (286, 111) - (437, 262)
[Fri May  3 04:53:46 2013] XMMSAS bgd. selection expression = annulus(31379.966400, 16163.072000, 2185.810063, 4371.620126, X, Y) && !ellipse(34074.241852, 21400.476761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31327.475983, 16563.427567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.098328, 14828.931442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33919.243896, 20316.184036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31241.705000, 15565.188000, 3468.568100, 3468.568100, 0.000000, X, Y) && !ellipse(34727.400299, 19870.151062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.082000, 19247.646000, 3145.656091, 3145.656091, 0.000000, X, Y) && !ellipse(34509.812683, 18564.666519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.334198, 20236.268982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32024.819427, 16292.978317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31881.360229, 15709.455978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35012.972595, 20310.565994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31771.330505, 15089.227859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30629.420990, 16485.728134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35482.254333, 19444.158249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32826.890503, 18398.781616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.416016, 16837.554031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33788.356262, 17868.770065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33425.254456, 20397.494308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33505.149597, 18479.511765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31940.519592, 14382.320999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32427.998901, 16719.965439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34392.609070, 19273.442520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33511.120758, 19968.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.813293, 21393.898926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26829.580231, 14560.654007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31488.344208, 14562.397034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32287.983276, 13194.606918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31744.294342, 13980.484970, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:53:46 2013] Writing fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src355.gif