[Fri May  3 04:43:10 2013] Detection parameters:
  Position = (363.0, 295.9) = 6 16 49.57 22 41 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 572.8 +/- 54.8
  Background counts = 1186.0
  Rate = 0.007 +/- 0.0007

[Fri May  3 04:43:25 2013] Off-axis axis estimate = 4.69'
[Fri May  3 04:45:55 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:55 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Fri May  3 04:45:55 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987
[Fri May  3 04:45:55 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 8.77"
[Fri May  3 04:45:58 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src64.ximg exists
[Fri May  3 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src64.csv
[Fri May  3 04:45:58 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src64_1.ximg exists
[Fri May  3 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src64.csv
[Fri May  3 04:45:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Fri May  3 04:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Fri May  3 04:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Fri May  3 04:46:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:47:17 2013] Warning, spatial fit 64 centroid is now closest to src. 260
[Fri May  3 04:47:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:47:18 2013] Assessing source extent using major
[Fri May  3 04:47:18 2013] Source does appear to be extended
[Fri May  3 04:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:47:18 2013] Source is confused with source 278
[Fri May  3 04:47:18 2013] Source is confused with source 271
[Fri May  3 04:48:37 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:37 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Fri May  3 04:48:37 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987
[Fri May  3 04:48:37 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 8.77"
[Fri May  3 04:48:39 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src63.ximg exists
[Fri May  3 04:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src63.csv
[Fri May  3 04:48:39 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri May  3 04:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src63.csv
[Fri May  3 04:48:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri May  3 04:48:42 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Fri May  3 04:49:57 2013] Spatial fit model total counts = 13609.700000, observed total counts = 13601.000000
[Fri May  3 04:49:57 2013] Offset between fit and detection position for source 267 = 0.935457 pixels
[Fri May  3 04:49:57 2013] 13356.079000 total counts/ 13027.000000 bgd. counts: snr = 2.883221
Spatial fit parameters:
  Offset between fit and detection position for source 267 = 0.935457 pixels
  Position = (362.2, 296.2) = 6 16 49.85 22 41 44.6
  Extent = 8.5 (5.4-17.5)", rotation angle = 0
  Source counts = 329.1 +/- 115.6
  Background counts = 13027.0
  Rate = 0.004 +/- 0.001
[Fri May  3 04:49:58 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:58 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:58 2013] Source does appear to be extended
[Fri May  3 04:49:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:53:45 2013] XMMSAS src. selection expression = ellipse(31458.824400, 25723.082260, 512.365815, 512.365815, 0.000000, X, Y)
[Fri May  3 04:53:45 2013] Not overwriting source region fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src267_src.reg
[Fri May  3 04:53:45 2013] Extracting stamp from image fullrun_mos2_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (333, 267) - (392, 326)
[Fri May  3 04:53:45 2013] XMMSAS bgd. selection expression = annulus(31458.824400, 25723.082260, 853.943025, 1707.886049, X, Y) && !ellipse(27418.139160, 26231.957031, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30871.031311, 26904.672424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29930.224000, 35952.962000, 10460.016301, 10460.016301, 0.000000, X, Y) && !ellipse(29919.814000, 35733.222000, 10565.376304, 10565.376304, 0.000000, X, Y) && !ellipse(21971.292000, 37404.778000, 10965.648316, 10965.648316, 0.000000, X, Y) && !ellipse(31668.497000, 25308.102400, 1411.696041, 1411.696041, 0.000000, X, Y) && !ellipse(32218.081540, 25657.417800, 1037.544030, 1037.544030, 0.000000, X, Y) && !ellipse(30128.520000, 28664.618000, 1353.392039, 1353.392039, -0.000000, X, Y) && !ellipse(29938.831940, 28229.664795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29225.263611, 27967.355865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32314.838898, 25107.650360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30280.831573, 27708.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.600159, 25617.429260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.996552, 25952.116943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29280.286438, 26470.288391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29982.164673, 26670.613007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32495.927826, 24692.563080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32748.561829, 25195.598206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29905.498047, 27543.745941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32937.448578, 27919.129913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33393.757843, 25806.355835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32957.695831, 26463.372040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31407.140137, 26477.794159, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:53:45 2013] Writing fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src267.gif