[Fri May  3 04:42:36 2013] Detection parameters:
  Position = (304.2, 438.0) = 6 17 8.07 22 52 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 651.4 +/- 48.4
  Background counts = 572.8
  Rate = 0.007 +/- 0.0005

[Fri May  3 04:43:25 2013] Off-axis axis estimate = 10.13'
[Fri May  3 04:45:55 2013] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:55 2013] Initial guess for spatial extent in simple fitting = 11.49"
[Fri May  3 04:45:55 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.912
[Fri May  3 04:45:55 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 11.49"
[Fri May  3 04:45:58 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src67.ximg exists
[Fri May  3 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src67.csv
[Fri May  3 04:45:58 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri May  3 04:45:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src67.csv
[Fri May  3 04:45:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri May  3 04:46:00 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Fri May  3 04:47:17 2013] Spatial fit model total counts = 8617.750000, observed total counts = 8618.000000
[Fri May  3 04:47:17 2013] Offset between fit and detection position for source 26 = 1.390097 pixels
[Fri May  3 04:47:17 2013] 7173.861000 total counts/ 6719.250000 bgd. counts: snr = 5.545996
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.390097 pixels
  Position = (303.7, 439.3) = 6 17 8.22 22 52 7.0
  Extent = 9.5 (7.3-23.0)", rotation angle = 0
  Source counts = 454.6 +/- 84.7
  Background counts = 6719.2
  Rate = 0.005 +/- 0.001
[Fri May  3 04:47:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:47:18 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:47:18 2013] Source does appear to be extended
[Fri May  3 04:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:47:18 2013] Source is confused with source 32
[Fri May  3 04:48:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:37 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Fri May  3 04:48:37 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.869
[Fri May  3 04:48:37 2013] Giving source the simple spatial ID 66 for pass 1, mean size = 9.49"
[Fri May  3 04:48:40 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src66.ximg exists
[Fri May  3 04:48:40 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src66_1.ximg exists
[Fri May  3 04:48:40 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src66 appears to have run properly
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Fri May  3 04:48:42 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Fri May  3 04:49:57 2013] Warning, spatial fit 66 centroid is now closest to src. 58
[Fri May  3 04:49:58 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:58 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:58 2013] Source does appear to be extended
[Fri May  3 04:49:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:53:46 2013] XMMSAS src. selection expression = ellipse(26373.678800, 38169.545800, 569.286616, 569.286616, 0.000000, X, Y)
[Fri May  3 04:53:46 2013] Not overwriting source region fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src26_src.reg
[Fri May  3 04:53:46 2013] Extracting stamp from image fullrun_mos2_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (271, 407) - (336, 472)
[Fri May  3 04:53:46 2013] XMMSAS bgd. selection expression = annulus(26373.678800, 38169.545800, 948.811027, 1897.622055, X, Y) && !ellipse(27427.704000, 37622.536000, 1787.120051, 1787.120051, 0.000000, X, Y) && !ellipse(29015.094000, 36039.596000, 3574.216103, 3574.216103, 0.000000, X, Y) && !ellipse(27862.111600, 37542.142000, 1387.328040, 1387.328040, 0.000000, X, Y) && !ellipse(28639.564000, 36267.512000, 1709.440049, 1709.440049, 0.000000, X, Y) && !ellipse(29180.668000, 35761.240000, 3321.024096, 3321.024096, 0.000000, X, Y) && !ellipse(29930.224000, 35952.962000, 10460.016301, 10460.016301, 0.000000, X, Y) && !ellipse(29919.814000, 35733.222000, 10565.376304, 10565.376304, 0.000000, X, Y) && !ellipse(21971.292000, 37404.778000, 10965.648316, 10965.648316, 0.000000, X, Y) && !ellipse(22958.698000, 38400.700000, 1866.880054, 1866.880054, 0.000000, X, Y) && !ellipse(28028.992371, 36579.060211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28439.441315, 35824.166351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.280914, 35453.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24560.532000, 36632.842000, 1770.624051, 1770.624051, 0.000000, X, Y) && !ellipse(23642.812000, 38224.387200, 1863.360054, 1863.360054, 0.000000, X, Y) && !ellipse(27381.382000, 38501.208000, 2807.776081, 2807.776081, 0.000000, X, Y) && !ellipse(23636.724304, 38913.489410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25592.218000, 36616.698000, 1768.392051, 993.696029, 5.467000, X, Y) && !ellipse(28575.758000, 35154.252200, 1660.512048, 1660.512048, 0.000000, X, Y) && !ellipse(28092.423676, 38142.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.312000, 37529.594000, 1765.384051, 608.025617, -0.000000, X, Y) && !ellipse(24182.810730, 38316.840607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26004.046000, 36846.540000, 2329.192067, 2329.192067, 0.000000, X, Y) && !ellipse(25179.182159, 38581.042572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.794000, 38688.498000, 1518.096044, 1518.096044, 0.000000, X, Y) && !ellipse(24938.142670, 38143.095490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27000.832275, 37713.214386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.149506, 37377.209808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.239258, 37002.054169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.847382, 39000.582336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.078796, 37283.691711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24733.612488, 39272.019257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.075592, 38661.428894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.213043, 37604.610413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24676.040833, 38833.573029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24379.059875, 39528.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27783.044000, 35071.002000, 1684.576048, 1684.576048, 0.000000, X, Y) && !ellipse(24486.827515, 37998.207886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25993.543365, 38311.419037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.068000, 38888.440000, 1861.856054, 1861.856054, 0.000000, X, Y) && !ellipse(23626.189148, 36921.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29073.719849, 38405.075195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.844940, 36564.728363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24843.650177, 39954.191864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27015.371216, 39613.474609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.992035, 39594.934540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.984161, 40054.196198, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:53:46 2013] Writing fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src26.gif