[Fri May  3 04:42:48 2013] Detection parameters:
  Position = (360.9, 399.7) = 6 16 50.24 22 49 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 418.8 +/- 43.9
  Background counts = 862.9
  Rate = 0.009 +/- 0.0009

[Fri May  3 04:43:25 2013] Off-axis axis estimate = 8.63'
[Fri May  3 04:45:55 2013] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:55 2013] Initial guess for spatial extent in simple fitting = 10.74"
[Fri May  3 04:45:55 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Fri May  3 04:45:55 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 10.74"
[Fri May  3 04:45:57 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src47.ximg exists
[Fri May  3 04:45:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src47.csv
[Fri May  3 04:45:57 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri May  3 04:45:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src47.csv
[Fri May  3 04:45:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri May  3 04:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri May  3 04:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Fri May  3 04:46:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:47:17 2013] Warning, spatial fit 47 centroid is now closest to src. 195
[Fri May  3 04:47:17 2013] Spatial fit model total counts = 10836.000000, observed total counts = 10840.000000
[Fri May  3 04:47:17 2013] Offset between fit and detection position for source 110 = 0.610898 pixels
[Fri May  3 04:47:17 2013] Warning, changing simple spatial fit ID from 47 to 48
[Fri May  3 04:47:17 2013] 9107.325000 total counts/ 8888.250000 bgd. counts: snr = 2.323725
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.610898 pixels
  Position = (360.5, 399.3) = 6 16 50.36 22 49 12.8
  Extent = 21.8 (15.9-43.6)" x 3.2 (2.7-4.9)", rotation angle = 360 (359-0) degrees
  Source counts = 219.1 +/- 95.4
  Background counts = 8888.2
  Rate = 0.003 +/- 0.001
[Fri May  3 04:47:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:47:18 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:47:18 2013] Source does appear to be extended
[Fri May  3 04:47:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.21
[Fri May  3 04:47:18 2013] Source is asymmetric
[Fri May  3 04:47:18 2013] Source is confused with source 40
[Fri May  3 04:48:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:37 2013] Initial guess for spatial extent in simple fitting = 12.47"
[Fri May  3 04:48:37 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.080
[Fri May  3 04:48:37 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 12.47"
[Fri May  3 04:48:39 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src46.ximg exists
[Fri May  3 04:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src46.csv
[Fri May  3 04:48:39 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src46_1.ximg exists
[Fri May  3 04:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src46.csv
[Fri May  3 04:48:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Fri May  3 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Fri May  3 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Fri May  3 04:48:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:49:57 2013] Warning, spatial fit 46 centroid is now closest to src. 40
[Fri May  3 04:49:58 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:58 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:58 2013] Source does appear to be extended
[Fri May  3 04:49:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.21
[Fri May  3 04:49:58 2013] Source is asymmetric
[Fri May  3 04:53:43 2013] XMMSAS src. selection expression = ellipse(31313.552000, 34686.918000, 1306.764038, 189.912605, 359.706000, X, Y)
[Fri May  3 04:53:43 2013] Not overwriting source region fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src110_src.reg
[Fri May  3 04:53:43 2013] Extracting stamp from image fullrun_mos2_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (285, 324) - (436, 474)
[Fri May  3 04:53:43 2013] XMMSAS bgd. selection expression = annulus(31313.552000, 34686.918000, 2177.940063, 4355.880125, X, Y) && !ellipse(29140.398254, 31542.976746, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27427.704000, 37622.536000, 1787.120051, 1787.120051, 0.000000, X, Y) && !ellipse(30511.621600, 36430.746000, 1757.200051, 1757.200051, 0.000000, X, Y) && !ellipse(29015.094000, 36039.596000, 3574.216103, 3574.216103, 0.000000, X, Y) && !ellipse(27862.111600, 37542.142000, 1387.328040, 1387.328040, 0.000000, X, Y) && !ellipse(28639.564000, 36267.512000, 1709.440049, 1709.440049, 0.000000, X, Y) && !ellipse(30260.664000, 36245.386000, 1085.016031, 1085.016031, 0.000000, X, Y) && !ellipse(31144.371600, 31957.245000, 723.973621, 723.973621, 0.000000, X, Y) && !ellipse(29180.668000, 35761.240000, 3321.024096, 3321.024096, 0.000000, X, Y) && !ellipse(31141.233643, 35820.722778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29930.224000, 35952.962000, 10460.016301, 10460.016301, 0.000000, X, Y) && !ellipse(30711.928680, 31609.835693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29557.659600, 35014.130000, 1101.256032, 1101.256032, 0.000000, X, Y) && !ellipse(28266.886000, 29880.854000, 1346.064039, 1346.064039, 0.000000, X, Y) && !ellipse(31918.413818, 36234.283417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29919.814000, 35733.222000, 10565.376304, 10565.376304, 0.000000, X, Y) && !ellipse(21971.292000, 37404.778000, 10965.648316, 10965.648316, 0.000000, X, Y) && !ellipse(28028.992371, 36579.060211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28439.441315, 35824.166351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32422.524231, 36663.160919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.280914, 35453.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28790.263611, 29712.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29854.312000, 35257.683920, 667.587219, 667.587219, 0.000000, X, Y) && !ellipse(30657.880000, 36211.346000, 2299.936066, 2299.936066, 0.000000, X, Y) && !ellipse(30816.943054, 31541.532410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29690.370000, 30889.014000, 1460.976042, 1460.976042, 0.000000, X, Y) && !ellipse(30341.406067, 35207.886261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27381.382000, 38501.208000, 2807.776081, 2807.776081, 0.000000, X, Y) && !ellipse(31296.441345, 36830.895050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31284.920000, 35267.220000, 1775.184051, 524.752015, 5.374250, X, Y) && !ellipse(25592.218000, 36616.698000, 1768.392051, 993.696029, 5.467000, X, Y) && !ellipse(28575.758000, 35154.252200, 1660.512048, 1660.512048, 0.000000, X, Y) && !ellipse(26373.678800, 38169.545800, 759.048822, 759.048822, 0.000000, X, Y) && !ellipse(28092.423676, 38142.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31831.700562, 35533.071594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.312000, 37529.594000, 1765.384051, 608.025617, -0.000000, X, Y) && !ellipse(26004.046000, 36846.540000, 2329.192067, 2329.192067, 0.000000, X, Y) && !ellipse(26242.794000, 38688.498000, 1518.096044, 1518.096044, 0.000000, X, Y) && !ellipse(33180.452789, 35793.511383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30065.112000, 31285.952000, 1285.608037, 1285.608037, 0.000000, X, Y) && !ellipse(32765.429230, 30727.025177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32971.379852, 35293.181732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.905334, 30143.691345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27000.832275, 37713.214386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30967.785889, 33678.047760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34248.807373, 31474.171661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.239258, 37002.054169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.847382, 39000.582336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33204.462219, 37184.898071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31220.966000, 31947.860000, 862.704025, 862.704025, 0.000000, X, Y) && !ellipse(27059.519043, 35131.740021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29679.955963, 37016.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32969.710000, 30499.212000, 1586.632046, 1586.632046, 0.000000, X, Y) && !ellipse(28392.075592, 38661.428894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29179.145752, 30219.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32505.342560, 30149.771362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27783.044000, 35071.002000, 1684.576048, 1684.576048, 0.000000, X, Y) && !ellipse(31818.205048, 34617.505981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30273.923187, 33365.999512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.068000, 38888.440000, 1861.856054, 1861.856054, 0.000000, X, Y) && !ellipse(30207.682861, 32940.900116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30164.915649, 30923.261047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32569.708435, 32303.464752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30334.738000, 31945.594000, 2224.800064, 2224.800064, 0.000000, X, Y) && !ellipse(31772.814667, 31178.016418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30850.024719, 32761.279419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29977.197113, 34847.601440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29278.486328, 38049.980957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29073.719849, 38405.075195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32308.278320, 37440.210999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.906219, 34857.597626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30418.792206, 34847.869598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.844940, 36564.728363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27015.371216, 39613.474609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32121.796000, 35293.732000, 1781.344051, 1781.344051, 0.000000, X, Y)
[Fri May  3 04:53:43 2013] Writing fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src110.gif