[Fri May  3 04:42:47 2013] Detection parameters:
  Position = (349.3, 405.2) = 6 16 53.87 22 49 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 416.7 +/- 48.1
  Background counts = 876.7
  Rate = 0.008 +/- 0.0009

[Fri May  3 04:43:25 2013] Off-axis axis estimate = 8.58'
[Fri May  3 04:45:55 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:55 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Fri May  3 04:45:55 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Fri May  3 04:45:55 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 10.72"
[Fri May  3 04:45:57 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src53.ximg exists
[Fri May  3 04:45:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src53.csv
[Fri May  3 04:45:57 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri May  3 04:45:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src53.csv
[Fri May  3 04:45:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri May  3 04:46:00 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri May  3 04:46:00 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Fri May  3 04:47:17 2013] Warning, spatial fit 53 centroid is now closest to src. 108
[Fri May  3 04:47:18 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:47:18 2013] Assessing source extent using major
[Fri May  3 04:47:18 2013] Source does appear to be extended
[Fri May  3 04:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:47:18 2013] Source is confused with source 75
[Fri May  3 04:47:18 2013] Source is confused with source 79
[Fri May  3 04:47:18 2013] Source is confused with source 108
[Fri May  3 04:47:18 2013] Source is confused with source 110
[Fri May  3 04:47:18 2013] Source is confused with source 106
[Fri May  3 04:47:18 2013] Source is confused with source 105
[Fri May  3 04:47:18 2013] Source is confused with source 109
[Fri May  3 04:47:18 2013] Source is confused with source 176
[Fri May  3 04:48:37 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:37 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Fri May  3 04:48:37 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Fri May  3 04:48:37 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 10.72"
[Fri May  3 04:48:39 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src52.ximg exists
[Fri May  3 04:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src52.csv
[Fri May  3 04:48:39 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri May  3 04:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src52.csv
[Fri May  3 04:48:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri May  3 04:48:42 2013] fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri May  3 04:48:42 2013] Fit fullrun_mos2_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri May  3 04:49:57 2013] Warning, spatial fit 52 centroid is now closest to src. 112
[Fri May  3 04:49:58 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:58 2013] Assessing source extent using major
[Fri May  3 04:49:58 2013] Source does appear to be extended
[Fri May  3 04:49:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:53:44 2013] XMMSAS src. selection expression = ellipse(30341.406067, 35207.886261, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 04:53:44 2013] Not overwriting source region fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src107_src.reg
[Fri May  3 04:53:44 2013] Extracting stamp from image fullrun_mos2_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (312, 368) - (387, 443)
[Fri May  3 04:53:44 2013] XMMSAS bgd. selection expression = annulus(30341.406067, 35207.886261, 1087.500000, 2175.000000, X, Y) && !ellipse(29140.398254, 31542.976746, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27427.704000, 37622.536000, 1787.120051, 1787.120051, 0.000000, X, Y) && !ellipse(30511.621600, 36430.746000, 1757.200051, 1757.200051, 0.000000, X, Y) && !ellipse(29015.094000, 36039.596000, 3574.216103, 3574.216103, 0.000000, X, Y) && !ellipse(27862.111600, 37542.142000, 1387.328040, 1387.328040, 0.000000, X, Y) && !ellipse(28639.564000, 36267.512000, 1709.440049, 1709.440049, 0.000000, X, Y) && !ellipse(30260.664000, 36245.386000, 1085.016031, 1085.016031, 0.000000, X, Y) && !ellipse(29180.668000, 35761.240000, 3321.024096, 3321.024096, 0.000000, X, Y) && !ellipse(31141.233643, 35820.722778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29930.224000, 35952.962000, 10460.016301, 10460.016301, 0.000000, X, Y) && !ellipse(29557.659600, 35014.130000, 1101.256032, 1101.256032, 0.000000, X, Y) && !ellipse(31918.413818, 36234.283417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29919.814000, 35733.222000, 10565.376304, 10565.376304, 0.000000, X, Y) && !ellipse(21971.292000, 37404.778000, 10965.648316, 10965.648316, 0.000000, X, Y) && !ellipse(28028.992371, 36579.060211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28439.441315, 35824.166351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32422.524231, 36663.160919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.280914, 35453.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29854.312000, 35257.683920, 667.587219, 667.587219, 0.000000, X, Y) && !ellipse(31313.552000, 34686.918000, 1742.352050, 253.216807, 359.706000, X, Y) && !ellipse(30657.880000, 36211.346000, 2299.936066, 2299.936066, 0.000000, X, Y) && !ellipse(27381.382000, 38501.208000, 2807.776081, 2807.776081, 0.000000, X, Y) && !ellipse(31296.441345, 36830.895050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31284.920000, 35267.220000, 1775.184051, 524.752015, 5.374250, X, Y) && !ellipse(28575.758000, 35154.252200, 1660.512048, 1660.512048, 0.000000, X, Y) && !ellipse(28092.423676, 38142.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31831.700562, 35533.071594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.312000, 37529.594000, 1765.384051, 608.025617, -0.000000, X, Y) && !ellipse(26004.046000, 36846.540000, 2329.192067, 2329.192067, 0.000000, X, Y) && !ellipse(33180.452789, 35793.511383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32971.379852, 35293.181732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30967.785889, 33678.047760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33204.462219, 37184.898071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29679.955963, 37016.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27783.044000, 35071.002000, 1684.576048, 1684.576048, 0.000000, X, Y) && !ellipse(31818.205048, 34617.505981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30273.923187, 33365.999512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.068000, 38888.440000, 1861.856054, 1861.856054, 0.000000, X, Y) && !ellipse(30207.682861, 32940.900116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32569.708435, 32303.464752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30334.738000, 31945.594000, 2224.800064, 2224.800064, 0.000000, X, Y) && !ellipse(30850.024719, 32761.279419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29977.197113, 34847.601440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29278.486328, 38049.980957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32308.278320, 37440.210999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.906219, 34857.597626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30418.792206, 34847.869598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32121.796000, 35293.732000, 1781.344051, 1781.344051, 0.000000, X, Y)
[Fri May  3 04:53:44 2013] Writing fullrun_mos2_xmm0600110101_pi300-10000_pass1_cl_src107.gif