[Fri May  3 04:42:00 2013] Detection parameters:
  Position = (245.0, 451.0) = 6 17 26.71 22 52 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 840.6 +/- 51.4
  Background counts = 477.8
  Rate = 0.009 +/- 0.0006

[Fri May  3 04:42:32 2013] Off-axis axis estimate = 11.72'
[Fri May  3 04:45:49 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 04:45:49 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Fri May  3 04:45:49 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Fri May  3 04:45:49 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 12.29"
[Fri May  3 04:45:51 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src48.ximg exists
[Fri May  3 04:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src48.csv
[Fri May  3 04:45:51 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri May  3 04:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src48.csv
[Fri May  3 04:45:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:54 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri May  3 04:45:54 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri May  3 04:45:54 2013] Fit fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Fri May  3 04:46:55 2013] Spatial fit model total counts = 11120.400000, observed total counts = 11106.000000
[Fri May  3 04:46:55 2013] Offset between fit and detection position for source 21 = 2.084315 pixels
[Fri May  3 04:46:55 2013] Warning, changing simple spatial fit ID from 48 to 34
[Fri May  3 04:46:55 2013] 10807.761000 total counts/ 10297.400000 bgd. counts: snr = 5.029371
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.084315 pixels
  Position = (243.4, 452.4) = 6 17 27.21 22 53 3.9
  Extent = 23.9 (11.6-47.8)" x 11.3 (23.9-47.8)", rotation angle = 227 (217-236) degrees
  Source counts = 510.4 +/- 104.0
  Background counts = 10297.4
  Rate = 0.007 +/- 0.001
[Fri May  3 04:46:56 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:56 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:46:56 2013] Source does appear to be extended
[Fri May  3 04:46:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.24
[Fri May  3 04:46:56 2013] Source is confused with source 13
[Fri May  3 04:46:56 2013] Source is confused with source 47
[Fri May  3 04:48:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:31 2013] Initial guess for spatial extent in simple fitting = 17.60"
[Fri May  3 04:48:31 2013] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.980
[Fri May  3 04:48:31 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 17.60"
[Fri May  3 04:48:33 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src44.ximg exists
[Fri May  3 04:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src44.csv
[Fri May  3 04:48:33 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri May  3 04:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src44.csv
[Fri May  3 04:48:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:36 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri May  3 04:48:36 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri May  3 04:48:36 2013] Fit fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Fri May  3 04:49:34 2013] Warning, spatial fit 44 centroid is now closest to src. 146
[Fri May  3 04:49:34 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:34 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:34 2013] Source does appear to be extended
[Fri May  3 04:49:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.24
[Fri May  3 04:51:55 2013] XMMSAS src. selection expression = ellipse(21124.974000, 39309.382000, 1432.866041, 678.954020, 226.817000, X, Y)
[Fri May  3 04:51:55 2013] Not overwriting source region fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_src.reg
[Fri May  3 04:51:55 2013] Extracting stamp from image fullrun_mos1_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (161, 370) - (326, 535)
[Fri May  3 04:51:55 2013] XMMSAS bgd. selection expression = annulus(21124.974000, 39309.382000, 2388.110069, 4776.220137, X, Y) && !ellipse(21978.640000, 37646.590000, 1910.488055, 1910.488055, 0.000000, X, Y) && !ellipse(26422.134125, 37623.681488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22418.554000, 37976.650000, 1880.096054, 1880.096054, 0.000000, X, Y) && !ellipse(24549.326000, 37049.896200, 1756.360051, 1756.360051, 0.000000, X, Y) && !ellipse(24637.641144, 37714.778198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21813.936508, 38492.319458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22729.478000, 37825.256000, 1810.608052, 1810.608052, 0.000000, X, Y) && !ellipse(25271.736481, 36852.658325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21154.922000, 34339.432000, 1010.408029, 1010.408029, 0.000000, X, Y) && !ellipse(25198.577148, 37797.267303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24994.052000, 37054.521600, 1973.400057, 628.659218, 79.114000, X, Y) && !ellipse(23027.140198, 40234.594818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25859.592000, 36830.597200, 1762.848051, 656.302419, 90.000000, X, Y) && !ellipse(24628.407800, 38509.829400, 820.616024, 820.616024, 0.000000, X, Y) && !ellipse(19431.146000, 38706.790200, 1987.336057, 1987.336057, 0.000000, X, Y) && !ellipse(18933.085022, 38488.135132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22394.847626, 40062.559540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17866.634094, 38222.541931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23154.616000, 38563.834000, 1871.400054, 1871.400054, 0.000000, X, Y) && !ellipse(18472.309998, 38398.286285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24085.299469, 37802.869415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25565.703979, 38925.421112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23523.150116, 36422.052399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25197.193878, 38399.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24939.000244, 39359.558228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.353271, 36852.326447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20280.018555, 39011.438751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21912.612000, 33088.430000, 1611.864046, 1611.864046, 0.000000, X, Y) && !ellipse(23900.655457, 37270.944916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24780.584000, 38641.055200, 927.376027, 927.376027, 0.000000, X, Y) && !ellipse(20188.072235, 34248.602936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.389832, 39353.576447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23663.271942, 40223.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24013.207458, 39870.707123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20430.919800, 36932.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25829.990906, 39525.728546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22765.179077, 39533.584778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20097.060486, 37626.238281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24105.005096, 39276.492981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23846.978729, 40813.035431, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:51:55 2013] Writing fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21.gif
[Fri May  3 04:52:15 2013] ../../xmm0600110101/products/events/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0600110101/products/events/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Fri May  3 04:52:15 2013] Mean detx,y = (12044.98, -5809.05) 
[Fri May  3 04:52:15 2013] ../../xmm0600110101/products/images/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0600110101/products/images/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Fri May  3 04:52:15 2013] ../../xmm0600110101/products/spectra/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0600110101/products/spectra/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Fri May  3 04:52:15 2013] Setting source spectrum file to fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May  3 04:52:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri May  3 04:52:15 2013] ../../xmm0600110101/products/lightcurves/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0600110101/products/lightcurves/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Fri May  3 04:53:32 2013] fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21.rmf exists, delete to re-create
[Fri May  3 04:53:32 2013] fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src21.arf exists, delete to re-create