[Fri May  3 04:42:11 2013] Detection parameters:
  Position = (246.2, 397.8) = 6 17 26.33 22 49 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 454.4 +/- 51.8
  Background counts = 1078.5
  Rate = 0.009 +/- 0.001

[Fri May  3 04:42:32 2013] Off-axis axis estimate = 8.14'
[Fri May  3 04:45:49 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Fri May  3 04:45:49 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Fri May  3 04:45:49 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.060
[Fri May  3 04:45:49 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 10.50"
[Fri May  3 04:45:51 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src54.ximg exists
[Fri May  3 04:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src54.csv
[Fri May  3 04:45:51 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri May  3 04:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src54.csv
[Fri May  3 04:45:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:45:54 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri May  3 04:45:54 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri May  3 04:45:54 2013] Fit fullrun_mos1_xmm0600110101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Fri May  3 04:46:55 2013] Spatial fit model total counts = 10761.100000, observed total counts = 10350.000000
[Fri May  3 04:46:55 2013] Offset between fit and detection position for source 101 = 3.521476 pixels
[Fri May  3 04:46:55 2013] Warning, changing simple spatial fit ID from 54 to 43
[Fri May  3 04:46:55 2013] 10711.906000 total counts/ 10313.300000 bgd. counts: snr = 3.925048
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 3.521476 pixels
  Position = (243.7, 395.3) = 6 17 27.10 22 48 55.4
  Extent = 12.6 (10.1-15.8)", rotation angle = 0
  Source counts = 398.6 +/- 103.5
  Background counts = 10313.3
  Rate = 0.005 +/- 0.001
[Fri May  3 04:46:56 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:46:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:46:56 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:46:56 2013] Source does appear to be extended
[Fri May  3 04:46:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:48:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 04:48:31 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Fri May  3 04:48:31 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.058
[Fri May  3 04:48:31 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 12.63"
[Fri May  3 04:48:33 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src49.ximg exists
[Fri May  3 04:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src49.csv
[Fri May  3 04:48:33 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri May  3 04:48:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src49.csv
[Fri May  3 04:48:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:48:36 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri May  3 04:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri May  3 04:48:36 2013] fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri May  3 04:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri May  3 04:48:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600110101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:49:34 2013] Warning, spatial fit 49 centroid is now closest to src. 103
[Fri May  3 04:49:34 2013] Vigneting correction estimate = 1.000000
[Fri May  3 04:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 04:49:34 2013] Assessing source extent using major axis lower bound
[Fri May  3 04:49:34 2013] Source does appear to be extended
[Fri May  3 04:49:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 04:51:56 2013] XMMSAS src. selection expression = ellipse(21154.922000, 34339.432000, 757.806022, 757.806022, 0.000000, X, Y)
[Fri May  3 04:51:56 2013] Not overwriting source region fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_src.reg
[Fri May  3 04:51:56 2013] Extracting stamp from image fullrun_mos1_xmm0600110101_pi300-10000_cl_sm2.00.img.gz, (200, 352) - (287, 439)
[Fri May  3 04:51:56 2013] XMMSAS bgd. selection expression = annulus(21154.922000, 34339.432000, 1263.010036, 2526.020073, X, Y) && !ellipse(21978.640000, 37646.590000, 1910.488055, 1910.488055, 0.000000, X, Y) && !ellipse(22418.554000, 37976.650000, 1880.096054, 1880.096054, 0.000000, X, Y) && !ellipse(24549.326000, 37049.896200, 1756.360051, 1756.360051, 0.000000, X, Y) && !ellipse(22729.478000, 37825.256000, 1810.608052, 1810.608052, 0.000000, X, Y) && !ellipse(21522.981140, 33482.385376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24994.052000, 37054.521600, 1973.400057, 628.659218, 79.114000, X, Y) && !ellipse(19431.146000, 38706.790200, 1987.336057, 1987.336057, 0.000000, X, Y) && !ellipse(22121.636200, 33419.557400, 657.327219, 657.327219, 0.000000, X, Y) && !ellipse(23189.904000, 30635.853600, 1367.216039, 1367.216039, 0.000000, X, Y) && !ellipse(23154.616000, 38563.834000, 1871.400054, 1871.400054, 0.000000, X, Y) && !ellipse(23523.150116, 36422.052399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.353271, 36852.326447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21912.612000, 33088.430000, 1611.864046, 1611.864046, 0.000000, X, Y) && !ellipse(23900.655457, 37270.944916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20188.072235, 34248.602936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20430.919800, 36932.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20097.060486, 37626.238281, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 04:51:56 2013] Writing fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101.gif
[Fri May  3 04:52:15 2013] ../../xmm0600110101/products/events/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_src.evt and ../../xmm0600110101/products/events/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_bgd.evt exist, delete to re-create
[Fri May  3 04:52:15 2013] Mean detx,y = (7173.17, -5880.56) 
[Fri May  3 04:52:15 2013] ../../xmm0600110101/products/images/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_src.img and ../../xmm0600110101/products/images/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_bgd.img exist, delete to re-create
[Fri May  3 04:52:15 2013] ../../xmm0600110101/products/spectra/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_src_b10.pi.gz and ../../xmm0600110101/products/spectra/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_bgd.pi exist, delete to re-create
[Fri May  3 04:52:15 2013] Setting source spectrum file to fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Fri May  3 04:52:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Fri May  3 04:52:15 2013] ../../xmm0600110101/products/lightcurves/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_src.lc and ../../xmm0600110101/products/lightcurves/fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101_bgd.lc exist, delete to re-create
[Fri May  3 04:53:32 2013] fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101.rmf exists, delete to re-create
[Fri May  3 04:53:32 2013] fullrun_mos1_xmm0600110101_pi300-10000_pass1_cl_src101.arf exists, delete to re-create