[Sun Feb 19 18:43:55 2012] Detection parameters:
  Position = (308.9, 134.9) = 2 14 32.13 -5 30 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 15.5
  Background counts = 62.9
  Rate = 0.001 +/- 0.0003

[Sun Feb 19 18:43:55 2012] Off-axis axis estimate = 11.88'
[Sun Feb 19 18:49:11 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 18:49:11 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Sun Feb 19 18:49:11 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.805
[Sun Feb 19 18:49:11 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 12.37"
[Sun Feb 19 21:08:13 2012] fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_src34.ximg exists
[Sun Feb 19 21:08:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_src34.csv
[Sun Feb 19 21:08:13 2012] fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Feb 19 21:08:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_src34.csv
[Sun Feb 19 21:08:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 21:08:14 2012] fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Feb 19 21:08:14 2012] fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Feb 19 21:08:14 2012] Fit fullrun_pn_xmm0600090401_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Sun Feb 19 23:28:56 2012] Spatial fit model total counts = 774.376000, observed total counts = 769.000000
[Sun Feb 19 23:28:56 2012] Offset between fit and detection position for source 34 = 7.836016 pixels
[Sun Feb 19 23:28:56 2012] 841.379700 total counts/ 86.809700 bgd. counts: snr = 80.987018
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 7.836016 pixels
  Position = (301.5, 137.5) = 2 14 34.29 -5 30 17.8
  Extent = 24.7 (24.7-49.5)", rotation angle = 0
  Source counts = 754.6 +/- 29.0
  Background counts = 86.8
  Rate = 0.01 +/- 0.0005
[Sun Feb 19 23:28:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 23:28:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 23:28:56 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 23:28:56 2012] Source does appear to be extended
[Sun Feb 19 23:28:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 23:28:56 2012] Source is confused with source 7
[Sun Feb 19 23:29:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 23:29:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 23:29:29 2012] Initial guess for spatial extent in simple fitting = 24.74"
[Sun Feb 19 23:29:29 2012] source mask rpix=5.7, npix_max = 153, mask sum = 116, frac = 0.758
[Sun Feb 19 23:29:29 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 24.74"
[Mon Feb 20 01:48:52 2012] fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_src34.ximg exists
[Mon Feb 20 01:48:52 2012] fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_src34_1.ximg exists
[Mon Feb 20 01:48:52 2012] Fit fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_src34 appears to have run properly
[Mon Feb 20 01:48:53 2012] fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Mon Feb 20 01:48:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src34.csv
[Mon Feb 20 01:48:53 2012] fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Mon Feb 20 01:48:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src34.csv
[Mon Feb 20 01:48:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 04:08:12 2012] Warning, spatial fit 34 centroid is now closest to src. 7
[Mon Feb 20 04:08:12 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 04:08:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 04:08:12 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 04:08:12 2012] Source does appear to be extended
[Mon Feb 20 04:08:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 04:08:40 2012] XMMSAS src. selection expression = ellipse(26185.542000, 11910.336800, 1484.376043, 1484.376043, 0.000000, X, Y)
[Mon Feb 20 04:08:40 2012] Writing source region out to fullrun_pn_xmm0600090401_pi300-10000_pass1_cl_src34_src.reg
[Mon Feb 20 04:08:40 2012] Extracting stamp from image fullrun_pn_xmm0600090401_pi300-10000_cl_sm2.00.img.gz, (216, 52) - (387, 223)
[Mon Feb 20 04:08:40 2012] XMMSAS bgd. selection expression = annulus(26185.542000, 11910.336800, 2473.960071, 4947.920142, X, Y) && !ellipse(25237.298096, 12044.121658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29499.354500, 12201.735000, 754.964022, 418.924812, 141.449137, X, Y) && !ellipse(22154.998000, 13977.451600, 1867.040054, 1867.040054, 0.000000, X, Y) && !ellipse(31775.612600, 13784.011400, 1547.491527, 1547.491527, 0.000000, X, Y) && !ellipse(27033.215000, 16553.849400, 1218.104035, 549.757616, 124.361236, X, Y) && !ellipse(22504.655400, 16346.876800, 347.500810, 347.500810, 0.000000, X, Y) && !ellipse(22578.663269, 15843.034485, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 04:08:40 2012] Writing fullrun_pn_xmm0600090401_pi300-10000_pass1_cl_src34.gif
[Mon Feb 20 04:44:40 2012] Mean detx,y = (5281.84, 13674.49) 
[Mon Feb 20 04:44:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 04:46:07 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 04:46:07 2012] Setting source spectrum file to fullrun_pn_xmm0600090401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Feb 20 04:46:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600090401_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon Feb 20 08:33:59 2012] Updating aperture counts using extracted products
[Mon Feb 20 08:33:59 2012] Error reading totcts from fullrun_pn_xmm0600090401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Feb 20 08:33:59 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 08:33:59 2012] Using photon index=1.80, rate=0.0128, arf fullrun_pn_xmm0600090401_pi300-10000_pass1_cl_src34.arf
[Mon Feb 20 08:33:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 08:33:59 2012] Updating source flux to 7.7e-14
[Mon Feb 20 08:36:24 2012] Flag c found in src. 34 procflags, skipping spectral fitting