[Sun Feb 19 18:45:22 2012] Detection parameters:
  Position = (493.2, 330.0) = 2 13 38.46 -5 16 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 12.8
  Background counts = 18.8
  Rate = 0.001 +/- 0.0002

[Sun Feb 19 18:45:24 2012] Off-axis axis estimate = 14.31'
[Sun Feb 19 22:17:41 2012] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 22:17:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 22:17:41 2012] Initial guess for spatial extent in simple fitting = 13.58"
[Sun Feb 19 22:17:41 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.067
[Sun Feb 19 22:17:41 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 13.58"
[Sun Feb 19 23:28:35 2012] fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_src33.ximg exists
[Sun Feb 19 23:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_src33.csv
[Sun Feb 19 23:28:35 2012] fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Feb 19 23:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_src33.csv
[Sun Feb 19 23:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 23:28:36 2012] fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Feb 19 23:28:36 2012] fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Feb 19 23:28:36 2012] Fit fullrun_mos2_xmm0600090401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Feb 19 23:29:16 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 14.112744 pixels away
[Sun Feb 19 23:29:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 23:29:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 23:29:16 2012] Assessing source extent using major
[Sun Feb 19 23:29:16 2012] Source does appear to be extended
[Sun Feb 19 23:29:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 02:54:20 2012] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 02:54:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 02:54:20 2012] Initial guess for spatial extent in simple fitting = 13.58"
[Mon Feb 20 02:54:20 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.067
[Mon Feb 20 02:54:20 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 13.58"
[Mon Feb 20 04:08:00 2012] fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_src33.ximg exists
[Mon Feb 20 04:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_src33.csv
[Mon Feb 20 04:08:00 2012] fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Feb 20 04:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_src33.csv
[Mon Feb 20 04:08:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 04:08:00 2012] fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Feb 20 04:08:00 2012] fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Feb 20 04:08:00 2012] Fit fullrun_mos2_xmm0600090401_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Mon Feb 20 04:08:26 2012] Spatial fit model total counts = 458.141000, observed total counts = 460.000000
[Mon Feb 20 04:08:26 2012] Offset between fit and detection position for source 23 = 0.460529 pixels
[Mon Feb 20 04:08:26 2012] 449.583000 total counts/ 347.250000 bgd. counts: snr = 5.491545
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.460529 pixels
  Position = (492.8, 330.2) = 2 13 38.59 -5 16 19.3
  Extent = 10.6 (8.0-13.7)", rotation angle = 0
  Source counts = 102.3 +/- 21.2
  Background counts = 347.2
  Rate = 0.002 +/- 0.0004
[Mon Feb 20 04:08:26 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 04:08:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 04:08:26 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 04:08:26 2012] Source does appear to be extended
[Mon Feb 20 04:08:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:35:21 2012] XMMSAS src. selection expression = ellipse(42823.673400, 28675.714200, 633.216018, 633.216018, 0.000000, X, Y)
[Mon Feb 20 07:35:21 2012] Writing source region out to fullrun_mos2_xmm0600090401_pi300-10000_pass1_cl_src23_src.reg
[Mon Feb 20 07:35:21 2012] Extracting stamp from image fullrun_mos2_xmm0600090401_pi300-10000_cl_sm2.00.img.gz, (456, 294) - (529, 367)
[Mon Feb 20 07:35:21 2012] XMMSAS bgd. selection expression = annulus(42823.673400, 28675.714200, 1055.360030, 2110.720061, X, Y) && !ellipse(41568.375600, 29842.327200, 819.728024, 285.152808, 67.972100, X, Y)
[Mon Feb 20 07:35:21 2012] Writing fullrun_mos2_xmm0600090401_pi300-10000_pass1_cl_src23.gif
[Mon Feb 20 07:43:00 2012] Mean detx,y = (-12652.19, 8385.12) 
[Mon Feb 20 07:43:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 07:43:25 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 07:43:25 2012] Setting source spectrum file to fullrun_mos2_xmm0600090401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Feb 20 07:43:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600090401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Feb 20 08:34:01 2012] Updating aperture counts using extracted products
[Mon Feb 20 08:34:01 2012] Error reading totcts from fullrun_mos2_xmm0600090401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Feb 20 08:34:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 08:34:01 2012] Using photon index=1.80, rate=0.00169, arf fullrun_mos2_xmm0600090401_pi300-10000_pass1_cl_src23.arf
[Mon Feb 20 08:34:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 08:34:01 2012] Updating source flux to 4.6e-14