[Sun Mar 25 16:10:35 2012] Detection parameters:
  Position = (375.5, 272.3) = 0 10 58.25 14 43 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.4 +/- 13.2
  Background counts = 42.5
  Rate = 0.002 +/- 0.0005

[Sun Mar 25 16:10:36 2012] Off-axis axis estimate = 5.90'
[Sun Mar 25 16:16:05 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 16:16:05 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Sun Mar 25 16:16:05 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Sun Mar 25 16:16:05 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.38"
[Sun Mar 25 18:05:37 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src31.ximg exists
[Sun Mar 25 18:05:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src31.csv
[Sun Mar 25 18:05:37 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Mar 25 18:05:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src31.csv
[Sun Mar 25 18:05:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:05:37 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Mar 25 18:05:37 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Mar 25 18:05:37 2012] Fit fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Mar 25 18:44:23 2012] Spatial fit model total counts = 417.655000, observed total counts = 418.000000
[Sun Mar 25 18:44:23 2012] Offset between fit and detection position for source 31 = 0.078746 pixels
[Sun Mar 25 18:44:23 2012] 415.388100 total counts/ 370.318000 bgd. counts: snr = 2.342077
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.078746 pixels
  Position = (375.5, 272.2) = 0 10 58.27 14 43 15.7
  Extent = 5.7 (4.2-8.6)", rotation angle = 0
  Source counts = 45.1 +/- 20.4
  Background counts = 370.3
  Rate = 0.002 +/- 0.0007
[Sun Mar 25 18:44:23 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 18:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 18:44:23 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 18:44:23 2012] Source does appear to be extended
[Sun Mar 25 18:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:44:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:44:43 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Sun Mar 25 18:44:43 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.909
[Sun Mar 25 18:44:43 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 5.73"
[Sun Mar 25 20:08:53 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src30.ximg exists
[Sun Mar 25 20:08:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src30.csv
[Sun Mar 25 20:08:53 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Mar 25 20:08:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src30.csv
[Sun Mar 25 20:08:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:08:53 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Mar 25 20:08:53 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Mar 25 20:08:53 2012] Fit fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Mar 25 20:51:35 2012] Spatial fit model total counts = 418.188000, observed total counts = 418.000000
[Sun Mar 25 20:51:35 2012] Offset between fit and detection position for source 31 = 0.013981 pixels
[Sun Mar 25 20:51:35 2012] 415.926600 total counts/ 370.617000 bgd. counts: snr = 2.353572
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.013981 pixels
  Position = (375.5, 272.2) = 0 10 58.26 14 43 15.7
  Extent = 5.8 (4.2-8.5)", rotation angle = 0
  Source counts = 45.3 +/- 20.4
  Background counts = 370.6
  Rate = 0.002 +/- 0.0007
[Sun Mar 25 20:51:35 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:51:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:51:35 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 20:51:35 2012] Source does appear to be extended
[Sun Mar 25 20:51:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:51:46 2012] XMMSAS src. selection expression = ellipse(32617.601600, 23636.439400, 345.254410, 345.254410, 0.000000, X, Y)
[Sun Mar 25 20:51:46 2012] Writing source region out to fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src31_src.reg
[Sun Mar 25 20:51:46 2012] Extracting stamp from image fullrun_pn_xmm0600090101_pi300-10000_cl_sm2.00.img.gz, (356, 252) - (395, 292)
[Sun Mar 25 20:51:46 2012] XMMSAS bgd. selection expression = annulus(32617.601600, 23636.439400, 575.424017, 1150.848033, X, Y) && !ellipse(31408.688019, 24669.291748, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 20:51:46 2012] Writing fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src31.gif
[Sun Mar 25 21:34:46 2012] Mean detx,y = (5955.18, 642.69) 
[Sun Mar 25 21:34:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 21:35:09 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 21:35:11 2012] Setting source spectrum file to fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Mar 25 21:35:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Mar 25 22:33:48 2012] Not generating rmf since there are only 45 counts
[Sun Mar 25 22:33:48 2012] rmf not generated due to insufficient counts
[Sun Mar 25 23:09:36 2012] Updating aperture counts using extracted products
[Sun Mar 25 23:09:36 2012] Error reading totcts from fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Mar 25 23:09:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 23:09:38 2012] Using photon index=1.80, rate=0.0016, arf fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src31.arf
[Sun Mar 25 23:09:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 23:09:38 2012] Updating source flux to 5.7e-15
[Sun Mar 25 23:10:25 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting