[Sun Mar 25 16:10:31 2012] Detection parameters:
  Position = (245.9, 254.5) = 0 11 37.12 14 42 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6991.7 +/- 98.1
  Background counts = 41.9
  Rate = 0.2 +/- 0.003

[Sun Mar 25 16:10:36 2012] Off-axis axis estimate = 4.97'
[Sun Mar 25 16:16:05 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 16:16:05 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Sun Mar 25 16:16:05 2012] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.539
[Sun Mar 25 16:16:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.91"
[Sun Mar 25 18:05:36 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 25 18:05:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 18:05:36 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 25 18:05:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 18:05:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:05:37 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 25 18:05:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 25 18:05:37 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 25 18:05:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 25 18:05:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:44:23 2012] Spatial fit model total counts = 7604.510000, observed total counts = 6475.000000
[Sun Mar 25 18:44:23 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 18:44:23 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 18:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 18:44:23 2012] Assessing source extent using major
[Sun Mar 25 18:44:23 2012] Source does appear to be extended
[Sun Mar 25 18:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:44:43 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:44:43 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Sun Mar 25 18:44:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.539
[Sun Mar 25 18:44:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.91"
[Sun Mar 25 20:08:52 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 25 20:08:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 20:08:52 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 25 20:08:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 20:08:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:08:53 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 25 20:08:53 2012] fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 25 20:08:53 2012] Fit fullrun_pn_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 25 20:51:35 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.651532 pixels away
[Sun Mar 25 20:51:35 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:51:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:51:35 2012] Assessing source extent using major
[Sun Mar 25 20:51:35 2012] Source does appear to be extended
[Sun Mar 25 20:51:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:51:46 2012] Counts = 6991.671875, rescaling region sizes by 2.000000
[Sun Mar 25 20:51:46 2012] XMMSAS src. selection expression = ellipse(21342.331619, 22096.046646, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar 25 20:51:46 2012] Writing source region out to fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 25 20:51:46 2012] Extracting stamp from image fullrun_pn_xmm0600090101_pi300-10000_cl_sm2.00.img.gz, (171, 180) - (321, 330)
[Sun Mar 25 20:51:46 2012] XMMSAS bgd. selection expression = annulus(21342.331619, 22096.046646, 4350.000000, 8700.000000, X, Y) && !ellipse(27742.732800, 26945.103200, 447.213118, 447.213118, 0.000000, X, Y) && !ellipse(13940.494919, 23545.850616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26555.596320, 19602.099400, 410.887212, 410.887212, 0.000000, X, Y) && !ellipse(17119.007200, 18939.644200, 598.828817, 347.555210, 54.178200, X, Y) && !ellipse(25440.651881, 17420.610278, 468.441004, 319.633564, 215.794846, X, Y) && !ellipse(13264.551010, 21356.932953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21049.237400, 25230.672400, 464.829613, 464.829613, 0.000000, X, Y) && !ellipse(18232.813080, 15728.357132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19045.399399, 21685.329544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24988.333344, 28813.556183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19242.691971, 27828.057098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30152.487457, 16503.612411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24474.651550, 24009.601929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.880951, 21757.821136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18581.540140, 20285.908200, 259.008807, 259.008807, 0.000000, X, Y) && !ellipse(19186.932373, 17755.588821, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 20:51:46 2012] Writing fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src1.gif
[Sun Mar 25 20:52:11 2012] Mean detx,y = (-3502.10, 6868.50) 
[Sun Mar 25 20:52:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 20:57:27 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 20:57:28 2012] Setting source spectrum file to fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 20:57:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 25 21:42:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 21:42:11 2012] rmf not generated due to insufficient counts
[Sun Mar 25 23:09:34 2012] Updating aperture counts using extracted products
[Sun Mar 25 23:09:34 2012] Error reading totcts from fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 23:09:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 23:09:36 2012] Using photon index=1.80, rate=0.205, arf fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 25 23:09:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 23:09:36 2012] Updating source flux to 7.6e-13
[Sun Mar 25 23:10:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Mar 25 23:12:17 2012] xmm0600090101/analysis//spectral/fullrun_pn_xmm0600090101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete