[Sun Mar 25 16:10:39 2012] Detection parameters:
  Position = (319.5, 310.2) = 0 11 15.04 14 46 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1237.2 +/- 45.0
  Background counts = 114.4
  Rate = 0.03 +/- 0.001

[Sun Mar 25 16:10:40 2012] Off-axis axis estimate = 1.75'
[Sun Mar 25 18:17:47 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:17:47 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 25 18:17:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Sun Mar 25 18:17:47 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.30"
[Sun Mar 25 18:44:11 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Mar 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src2.csv
[Sun Mar 25 18:44:11 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Mar 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src2.csv
[Sun Mar 25 18:44:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:44:11 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Mar 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Mar 25 18:44:11 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Mar 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Mar 25 18:44:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:44:30 2012] Source 2 is offset by 7.229952 and 5.884401 pixels which is larger than
2 X fitted extent = 0.839430 x 0.839430, not incorporating fit results
[Sun Mar 25 18:44:30 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 18:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 18:44:30 2012] Assessing source extent using major
[Sun Mar 25 18:44:30 2012] Source does appear to be extended
[Sun Mar 25 18:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:20:32 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 20:20:32 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 25 20:20:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Sun Mar 25 20:20:32 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.30"
[Sun Mar 25 20:51:27 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Mar 25 20:51:27 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Mar 25 20:51:27 2012] Fit fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Mar 25 20:51:27 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Mar 25 20:51:27 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Mar 25 20:51:27 2012] Fit fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Mar 25 20:51:38 2012] Spatial fit model total counts = 1048.230000, observed total counts = 1012.000000
[Sun Mar 25 20:51:38 2012] Offset between fit and detection position for source 2 = 0.069798 pixels
[Sun Mar 25 20:51:38 2012] 1050.504000 total counts/ 358.540000 bgd. counts: snr = 36.543883
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.069798 pixels
  Position = (319.5, 310.2) = 0 11 15.06 14 46 0.9
  Extent = 5.5 (5.1-5.9)", rotation angle = 0
  Source counts = 692.0 +/- 32.4
  Background counts = 358.5
  Rate = 0.02 +/- 0.001
[Sun Mar 25 20:51:38 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:51:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:51:38 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 20:51:38 2012] Source does appear to be extended
[Sun Mar 25 20:51:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 22:51:07 2012] XMMSAS src. selection expression = ellipse(27743.762800, 26938.772600, 329.822409, 329.822409, 0.000000, X, Y)
[Sun Mar 25 22:51:07 2012] Writing source region out to fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2_src.reg
[Sun Mar 25 22:51:07 2012] Extracting stamp from image fullrun_mos2_xmm0600090101_pi300-10000_cl_sm2.00.img.gz, (300, 291) - (338, 329)
[Sun Mar 25 22:51:07 2012] XMMSAS bgd. selection expression = annulus(27743.762800, 26938.772600, 549.704016, 1099.408032, X, Y)
[Sun Mar 25 22:51:07 2012] Writing fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2.gif
[Sun Mar 25 22:54:41 2012] Mean detx,y = (0.17, 90.89) 
[Sun Mar 25 22:54:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 22:54:59 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 22:54:59 2012] Setting source spectrum file to fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 25 22:54:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Mar 25 23:09:39 2012] Updating aperture counts using extracted products
[Sun Mar 25 23:09:39 2012] Error reading totcts from fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 25 23:09:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 23:09:40 2012] Using photon index=1.80, rate=0.0225, arf fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2.arf
[Sun Mar 25 23:09:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 23:09:40 2012] Updating source flux to 2.9e-13
[Sun Mar 25 23:10:13 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Sun Mar 25 23:10:25 2012] Reading fit data from xmm0600090101/analysis//spectral/fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2_pl.csv
[Sun Mar 25 23:10:25 2012] Spectral fit parameter nH value = 7.29719e+20
[Sun Mar 25 23:10:25 2012] Spectral fit parameter PhoIndex value = 1.81086
[Sun Mar 25 23:10:25 2012] Failed to get F(0.3-8.0) from xmm0600090101/analysis//spectral/fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Mar 25 23:10:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 23:10:25 2012] Using Nh = 7.3e+20, photon index=1.81, rate=0.0225, arf fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src2.arf
[Sun Mar 25 23:10:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 23:10:25 2012] Updating source flux to 3.1e-13