[Sun Mar 25 16:10:40 2012] Detection parameters:
  Position = (410.8, 379.3) = 0 10 47.66 14 51 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.1 +/- 22.7
  Background counts = 93.3
  Rate = 0.01 +/- 0.001

[Sun Mar 25 16:10:40 2012] Off-axis axis estimate = 10.03'
[Sun Mar 25 18:17:47 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:17:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 18:17:47 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun Mar 25 18:17:47 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Sun Mar 25 18:17:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.45"
[Sun Mar 25 18:44:11 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Mar 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src3.csv
[Sun Mar 25 18:44:11 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Mar 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src3.csv
[Sun Mar 25 18:44:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:44:11 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Mar 25 18:44:11 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Mar 25 18:44:11 2012] Fit fullrun_mos2_xmm0600090101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Mar 25 18:44:30 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.828722 pixels away
[Sun Mar 25 18:44:30 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 18:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 18:44:30 2012] Assessing source extent using major
[Sun Mar 25 18:44:30 2012] Source does appear to be extended
[Sun Mar 25 18:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:20:32 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 20:20:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 20:20:32 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun Mar 25 20:20:32 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Sun Mar 25 20:20:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.45"
[Sun Mar 25 20:51:27 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar 25 20:51:27 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar 25 20:51:27 2012] Fit fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Mar 25 20:51:27 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar 25 20:51:27 2012] fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar 25 20:51:27 2012] Fit fullrun_mos2_xmm0600090101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Mar 25 20:51:38 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.003626 pixels away
[Sun Mar 25 20:51:38 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:51:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:51:38 2012] Assessing source extent using major
[Sun Mar 25 20:51:38 2012] Source does appear to be extended
[Sun Mar 25 20:51:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 22:51:07 2012] XMMSAS src. selection expression = ellipse(35687.663330, 32947.896118, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 22:51:07 2012] Writing source region out to fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src12_src.reg
[Sun Mar 25 22:51:07 2012] Extracting stamp from image fullrun_mos2_xmm0600090101_pi300-10000_cl_sm2.00.img.gz, (373, 342) - (448, 417)
[Sun Mar 25 22:51:07 2012] XMMSAS bgd. selection expression = annulus(35687.663330, 32947.896118, 1087.500000, 2175.000000, X, Y)
[Sun Mar 25 22:51:07 2012] Writing fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src12.gif
[Sun Mar 25 22:55:05 2012] Mean detx,y = (-4442.68, 8944.96) 
[Sun Mar 25 22:55:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 22:55:26 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 22:55:26 2012] Setting source spectrum file to fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Mar 25 22:55:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Mar 25 23:06:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 23:06:23 2012] rmf not generated due to insufficient counts
[Sun Mar 25 23:09:39 2012] Updating aperture counts using extracted products
[Sun Mar 25 23:09:39 2012] Error reading totcts from fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Mar 25 23:09:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 23:09:40 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0600090101_pi300-10000_pass1_cl_src12.arf
[Sun Mar 25 23:09:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 23:09:40 2012] Updating source flux to 2e-13
[Sun Mar 25 23:10:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting