[Sat Apr 28 00:02:12 2012] Detection parameters:
  Position = (286.1, 278.8) = 17 19 0.49 -38 48 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5339.4 +/- 86.9
  Background counts = 26.5
  Rate = 0.2 +/- 0.003

[Sat Apr 28 00:02:12 2012] Off-axis axis estimate = 1.68'
[Sat Apr 28 00:43:42 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 00:43:42 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Apr 28 00:43:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat Apr 28 00:43:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat Apr 28 01:00:49 2012] fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Apr 28 01:00:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_src1.csv
[Sat Apr 28 01:00:49 2012] fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Apr 28 01:00:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_src1.csv
[Sat Apr 28 01:00:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 01:00:49 2012] fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Apr 28 01:00:49 2012] fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Apr 28 01:00:49 2012] Fit fullrun_mos2_xmm0600080101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Apr 28 01:00:56 2012] Spatial fit model total counts = 5425.400000, observed total counts = 5016.000000
[Sat Apr 28 01:00:56 2012] Offset between fit and detection position for source 1 = 0.168802 pixels
[Sat Apr 28 01:00:56 2012] 5363.290000 total counts/ 1868.850000 bgd. counts: snr = 80.833310
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.168802 pixels
  Position = (286.2, 278.6) = 17 19 0.47 -38 48 50.0
  Extent = 4.9 (4.7-5.0)", rotation angle = 0
  Source counts = 3494.4 +/- 73.2
  Background counts = 1868.8
  Rate = 0.1 +/- 0.003
[Sat Apr 28 01:00:56 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 01:00:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 01:00:56 2012] Assessing source extent using major axis lower bound
[Sat Apr 28 01:00:56 2012] Source does appear to be extended
[Sat Apr 28 01:00:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 01:32:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr 28 01:32:49 2012] Initial guess for spatial extent in simple fitting = 4.88"
[Sat Apr 28 01:32:49 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.855
[Sat Apr 28 01:32:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.88"
[Sat Apr 28 01:51:23 2012] fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Apr 28 01:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_src1.csv
[Sat Apr 28 01:51:23 2012] fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Apr 28 01:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_src1.csv
[Sat Apr 28 01:51:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 01:51:24 2012] fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr 28 01:51:24 2012] fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr 28 01:51:24 2012] Fit fullrun_mos2_xmm0600080101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Apr 28 01:51:30 2012] Spatial fit model total counts = 5444.660000, observed total counts = 5016.000000
[Sat Apr 28 01:51:30 2012] Offset between fit and detection position for source 1 = 0.002745 pixels
[Sat Apr 28 01:51:30 2012] 5382.390000 total counts/ 1881.750000 bgd. counts: snr = 80.698691
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002745 pixels
  Position = (286.2, 278.6) = 17 19 0.47 -38 48 50.0
  Extent = 4.9 (4.7-5.0)", rotation angle = 0
  Source counts = 3500.6 +/- 73.4
  Background counts = 1881.8
  Rate = 0.1 +/- 0.003
[Sat Apr 28 01:51:30 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 01:51:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 01:51:30 2012] Assessing source extent using major axis lower bound
[Sat Apr 28 01:51:30 2012] Source does appear to be extended
[Sat Apr 28 01:51:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 02:34:35 2012] Counts = 3500.640000, rescaling region sizes by 2.000000
[Sat Apr 28 02:34:35 2012] XMMSAS src. selection expression = ellipse(24852.690800, 24190.877400, 584.428817, 584.428817, 0.000000, X, Y)
[Sat Apr 28 02:34:35 2012] Writing source region out to fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1_src.reg
[Sat Apr 28 02:34:35 2012] Extracting stamp from image fullrun_mos2_xmm0600080101_pi300-10000_cl_sm2.00.img.gz, (253, 245) - (320, 312)
[Sat Apr 28 02:34:35 2012] XMMSAS bgd. selection expression = annulus(24852.690800, 24190.877400, 1948.096056, 3896.192112, X, Y) && !ellipse(23691.152405, 24205.131561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23588.984222, 26693.361298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.682420, 22750.952400, 333.603210, 333.603210, 0.000000, X, Y) && !ellipse(29180.882141, 23918.847717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28995.876200, 23045.453200, 383.681611, 383.681611, 0.000000, X, Y) && !ellipse(26083.124400, 26653.962200, 285.955197, 285.955197, 0.000000, X, Y) && !ellipse(24657.960083, 23289.019012, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr 28 02:34:35 2012] Writing fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1.gif
[Sat Apr 28 02:34:37 2012] Mean detx,y = (30.29, 34.46) 
[Sat Apr 28 02:34:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr 28 02:34:45 2012] Binned source spectrum to 10 counts/bin
[Sat Apr 28 02:34:45 2012] Setting source spectrum file to fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Apr 28 02:34:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Apr 28 02:45:06 2012] Updating aperture counts using extracted products
[Sat Apr 28 02:45:06 2012] Error reading totcts from fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Apr 28 02:45:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 28 02:45:06 2012] Using photon index=1.80, rate=0.132, arf fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1.arf
[Sat Apr 28 02:45:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr 28 02:45:06 2012] Updating source flux to 1.4e-12
[Sat Apr 28 02:45:43 2012] Reading fit data from xmm0600080101/analysis//spectral/fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Apr 28 02:45:43 2012] Spectral fit parameter nH value = 8.51842e+21
[Sat Apr 28 02:45:43 2012] Spectral fit parameter PhoIndex value = 3.26562
[Sat Apr 28 02:45:43 2012] Failed to get F(0.3-8.0) from xmm0600080101/analysis//spectral/fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Apr 28 02:45:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 28 02:45:43 2012] Using Nh = 8.5e+21, photon index=3.27, rate=0.132, arf fullrun_mos2_xmm0600080101_pi300-10000_pass1_cl_src1.arf
[Sat Apr 28 02:45:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr 28 02:45:43 2012] Updating source flux to 1.3e-12