[Tue Dec 27 00:04:50 2011] Detection parameters:
  Position = (393.1, 186.8) = 19 20 42.97 43 48 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.8 +/- 26.6
  Background counts = 192.4
  Rate = 0.006 +/- 0.0005

[Tue Dec 27 00:04:50 2011] Off-axis axis estimate = 10.62'
[Tue Dec 27 00:31:12 2011] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 00:31:12 2011] Initial guess for spatial extent in simple fitting = 11.74"
[Tue Dec 27 00:31:12 2011] source mask rpix=2.7, npix_max = 40, mask sum = 26, frac = 0.636
[Tue Dec 27 00:31:12 2011] Giving source the simple spatial ID 89 for pass 0, mean size = 11.74"
[Wed Dec 28 03:16:56 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src89.ximg exists
[Wed Dec 28 03:16:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src89.csv
[Wed Dec 28 03:16:56 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src89_1.ximg exists
[Wed Dec 28 03:16:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src89.csv
[Wed Dec 28 03:16:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 03:16:59 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Wed Dec 28 03:16:59 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Wed Dec 28 03:16:59 2011] Fit fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Thu Dec 29 04:47:00 2011] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 96 at 14.998445 pixels away
[Thu Dec 29 04:47:00 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:00 2011] Assessing source extent using major
[Thu Dec 29 04:47:00 2011] Source does appear to be extended
[Thu Dec 29 04:47:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:48:17 2011] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 04:48:17 2011] Initial guess for spatial extent in simple fitting = 11.74"
[Thu Dec 29 04:48:17 2011] source mask rpix=2.7, npix_max = 40, mask sum = 26, frac = 0.636
[Thu Dec 29 04:48:17 2011] Giving source the simple spatial ID 67 for pass 1, mean size = 11.74"
[Fri Dec 30 16:07:10 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src67.ximg exists
[Fri Dec 30 16:07:10 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src67.csv
[Fri Dec 30 16:07:10 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src67_1.ximg exists
[Fri Dec 30 16:07:10 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src67.csv
[Fri Dec 30 16:07:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 16:07:12 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Fri Dec 30 16:07:12 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Fri Dec 30 16:07:12 2011] Fit fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Sat Dec 31 08:20:03 2011] Spatial fit model total counts = 1585.900000, observed total counts = 1586.000000
[Sat Dec 31 08:20:03 2011] Offset between fit and detection position for source 96 = 0.318737 pixels
[Sat Dec 31 08:20:03 2011] 1589.238000 total counts/ 1364.550000 bgd. counts: snr = 6.082542
Spatial fit parameters:
  Offset between fit and detection position for source 96 = 0.318737 pixels
  Position = (393.2, 187.1) = 19 20 42.93 43 48 39.5
  Extent = 3.3 (2.9-3.7)", rotation angle = 0
  Source counts = 224.7 +/- 39.9
  Background counts = 1364.5
  Rate = 0.004 +/- 0.0008
[Sat Dec 31 08:20:03 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:03 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:03 2011] Source does appear to be extended
[Sat Dec 31 08:20:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 08:21:00 2011] XMMSAS src. selection expression = ellipse(34163.210200, 16227.248280, 199.511406, 199.511406, 0.000000, X, Y)
[Sat Dec 31 08:21:00 2011] Writing source region out to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src96_src.reg
[Sat Dec 31 08:21:00 2011] Extracting stamp from image fullrun_pn_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (382, 176) - (405, 199)
[Sat Dec 31 08:21:00 2011] XMMSAS bgd. selection expression = annulus(34163.210200, 16227.248280, 332.519010, 665.038019, X, Y) && !ellipse(27556.310000, 23416.876000, 7329.072211, 7329.072211, 0.000000, X, Y)
[Sat Dec 31 08:21:00 2011] Writing fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src96.gif
[Sat Dec 31 16:11:27 2011] Mean detx,y = (11664.56, 1714.26) 
[Sat Dec 31 16:11:34 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 16:12:16 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 16:12:17 2011] Setting source spectrum file to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sat Dec 31 16:12:17 2011] Setting bgd. spectrum file to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Tue Jan  3 01:22:00 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:00 2012] Error reading totcts from fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Tue Jan  3 01:22:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:05 2012] Using photon index=1.80, rate=0.00432, arf fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src96.arf
[Tue Jan  3 01:22:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:05 2012] Updating source flux to 3.1e-14