[Tue Dec 27 00:04:49 2011] Detection parameters:
  Position = (353.7, 289.6) = 19 20 58.76 43 56 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 468.6 +/- 58.6
  Background counts = 2043.0
  Rate = 0.01 +/- 0.001

[Tue Dec 27 00:04:50 2011] Off-axis axis estimate = 4.06'
[Tue Dec 27 00:31:12 2011] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 00:31:12 2011] Initial guess for spatial extent in simple fitting = 8.46"
[Tue Dec 27 00:31:12 2011] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.962
[Tue Dec 27 00:31:12 2011] Giving source the simple spatial ID 81 for pass 0, mean size = 8.46"
[Wed Dec 28 03:16:56 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src81.ximg exists
[Wed Dec 28 03:16:56 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src81.csv
[Wed Dec 28 03:16:56 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src81_1.ximg exists
[Wed Dec 28 03:16:56 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src81.csv
[Wed Dec 28 03:16:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 03:16:59 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Wed Dec 28 03:16:59 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Wed Dec 28 03:16:59 2011] Fit fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Thu Dec 29 04:47:00 2011] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 10.617833 pixels away
[Thu Dec 29 04:47:00 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:00 2011] Assessing source extent using major
[Thu Dec 29 04:47:00 2011] Source does appear to be extended
[Thu Dec 29 04:47:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:00 2011] Source is confused with source 85
[Thu Dec 29 04:48:17 2011] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 04:48:17 2011] Initial guess for spatial extent in simple fitting = 8.46"
[Thu Dec 29 04:48:17 2011] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.962
[Thu Dec 29 04:48:17 2011] Giving source the simple spatial ID 63 for pass 1, mean size = 8.46"
[Fri Dec 30 16:07:10 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src63.ximg exists
[Fri Dec 30 16:07:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src63.csv
[Fri Dec 30 16:07:10 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Dec 30 16:07:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src63.csv
[Fri Dec 30 16:07:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 16:07:11 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Dec 30 16:07:11 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Dec 30 16:07:11 2011] Fit fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sat Dec 31 08:20:03 2011] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 10.636923 pixels away
[Sat Dec 31 08:20:03 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:03 2011] Assessing source extent using major
[Sat Dec 31 08:20:03 2011] Source does appear to be extended
[Sat Dec 31 08:20:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 08:20:59 2011] XMMSAS src. selection expression = ellipse(30726.677368, 25148.312134, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 08:20:59 2011] Writing source region out to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src88_src.reg
[Sat Dec 31 08:20:59 2011] Extracting stamp from image fullrun_pn_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (316, 252) - (391, 327)
[Sat Dec 31 08:20:59 2011] XMMSAS bgd. selection expression = annulus(30726.677368, 25148.312134, 1087.500000, 2175.000000, X, Y) && !ellipse(29240.790222, 26252.153839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.007965, 27803.341431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28973.369800, 27376.261200, 1374.728040, 1374.728040, 0.000000, X, Y) && !ellipse(29953.227509, 26881.247101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.890808, 25792.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.522000, 23957.453000, 1221.512035, 1221.512035, 0.000000, X, Y) && !ellipse(27556.310000, 23416.876000, 7329.072211, 7329.072211, 0.000000, X, Y) && !ellipse(30453.588000, 27152.406000, 1325.320038, 609.303218, 317.784300, X, Y) && !ellipse(27646.188200, 22606.797400, 1168.328034, 1168.328034, 0.000000, X, Y) && !ellipse(29781.212000, 27707.500000, 827.888024, 827.888024, 0.000000, X, Y) && !ellipse(29927.553375, 25628.731720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30805.784000, 29478.336000, 8970.000258, 8970.000258, 0.000000, X, Y) && !ellipse(28860.908000, 28671.560000, 5237.376151, 5237.376151, 0.000000, X, Y) && !ellipse(28385.191200, 27867.152000, 1264.840036, 1264.840036, 0.000000, X, Y) && !ellipse(31876.916000, 28294.753400, 1472.128042, 752.629622, 319.666000, X, Y) && !ellipse(31896.794000, 27568.186000, 8787.888253, 8787.888253, 0.000000, X, Y) && !ellipse(30904.917800, 26015.818000, 1377.848040, 1377.848040, 0.000000, X, Y)
[Sat Dec 31 08:20:59 2011] Writing fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src88.gif
[Sat Dec 31 16:04:31 2011] Mean detx,y = (2533.29, -1690.09) 
[Sat Dec 31 16:04:40 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 16:05:56 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 16:05:57 2011] Setting source spectrum file to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sat Dec 31 16:05:57 2011] Setting bgd. spectrum file to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Mon Jan  2 03:14:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan  2 03:14:57 2012] rmf not generated due to insufficient counts
[Tue Jan  3 01:22:00 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:00 2012] Error reading totcts from fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Tue Jan  3 01:22:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:05 2012] Using photon index=1.80, rate=0.0114, arf fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src88.arf
[Tue Jan  3 01:22:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:05 2012] Updating source flux to 3.1e-14
[Tue Jan  3 01:42:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting