[Tue Dec 27 00:04:43 2011] Detection parameters:
  Position = (229.9, 322.2) = 19 21 48.65 43 58 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 841.2 +/- 45.5
  Background counts = 433.2
  Rate = 0.03 +/- 0.001

[Tue Dec 27 00:04:50 2011] Off-axis axis estimate = 5.26'
[Tue Dec 27 00:31:12 2011] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 00:31:12 2011] Initial guess for spatial extent in simple fitting = 9.06"
[Tue Dec 27 00:31:12 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.937
[Tue Dec 27 00:31:12 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 9.06"
[Wed Dec 28 03:16:55 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src21.ximg exists
[Wed Dec 28 03:16:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src21.csv
[Wed Dec 28 03:16:55 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Dec 28 03:16:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src21.csv
[Wed Dec 28 03:16:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 03:16:57 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Dec 28 03:16:57 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Dec 28 03:16:57 2011] Fit fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Dec 29 04:46:59 2011] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 12.265736 pixels away
[Thu Dec 29 04:47:00 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:00 2011] Assessing source extent using major
[Thu Dec 29 04:47:00 2011] Source does appear to be extended
[Thu Dec 29 04:47:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:48:17 2011] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 04:48:17 2011] Initial guess for spatial extent in simple fitting = 9.06"
[Thu Dec 29 04:48:17 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.937
[Thu Dec 29 04:48:17 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 9.06"
[Fri Dec 30 16:07:08 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Dec 30 16:07:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src20.csv
[Fri Dec 30 16:07:08 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Dec 30 16:07:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src20.csv
[Fri Dec 30 16:07:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 16:07:10 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Dec 30 16:07:10 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Dec 30 16:07:10 2011] Fit fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Dec 31 08:20:03 2011] Spatial fit model total counts = 5510.880000, observed total counts = 5511.000000
[Sat Dec 31 08:20:03 2011] Offset between fit and detection position for source 27 = 0.218027 pixels
[Sat Dec 31 08:20:03 2011] 5554.982000 total counts/ 5060.970000 bgd. counts: snr = 6.944174
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.218027 pixels
  Position = (229.8, 322.4) = 19 21 48.70 43 58 28.4
  Extent = 4.7 (4.2-5.3)", rotation angle = 0
  Source counts = 494.0 +/- 74.5
  Background counts = 5061.0
  Rate = 0.01 +/- 0.001
[Sat Dec 31 08:20:03 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:03 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:03 2011] Source does appear to be extended
[Sat Dec 31 08:20:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 08:20:55 2011] XMMSAS src. selection expression = ellipse(19941.335200, 28000.952040, 280.556408, 280.556408, 0.000000, X, Y)
[Sat Dec 31 08:20:55 2011] Writing source region out to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src27_src.reg
[Sat Dec 31 08:20:55 2011] Extracting stamp from image fullrun_pn_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (214, 306) - (246, 339)
[Sat Dec 31 08:20:55 2011] XMMSAS bgd. selection expression = annulus(19941.335200, 28000.952040, 467.594013, 935.188027, X, Y) && !ellipse(27556.310000, 23416.876000, 7329.072211, 7329.072211, 0.000000, X, Y)
[Sat Dec 31 08:20:55 2011] Writing fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src27.gif
[Sat Dec 31 10:41:20 2011] Mean detx,y = (-6575.03, 4578.95) 
[Sat Dec 31 10:41:26 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 10:42:12 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 10:42:13 2011] Setting source spectrum file to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Dec 31 10:42:13 2011] Setting bgd. spectrum file to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue Jan  3 01:21:56 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:21:56 2012] Error reading totcts from fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Jan  3 01:22:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:03 2012] Using photon index=1.80, rate=0.00951, arf fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src27.arf
[Tue Jan  3 01:22:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:03 2012] Updating source flux to 5.4e-14