[Tue Dec 27 00:04:42 2011] Detection parameters:
  Position = (301.4, 322.4) = 19 21 19.85 43 58 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 983.6 +/- 65.8
  Background counts = 1930.7
  Rate = 0.02 +/- 0.001

[Tue Dec 27 00:04:50 2011] Off-axis axis estimate = 1.75'
[Tue Dec 27 00:31:12 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 00:31:12 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Dec 27 00:31:12 2011] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.790
[Tue Dec 27 00:31:12 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 7.30"
[Wed Dec 28 03:16:55 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src12.ximg exists
[Wed Dec 28 03:16:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src12.csv
[Wed Dec 28 03:16:55 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Dec 28 03:16:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src12.csv
[Wed Dec 28 03:16:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 03:16:57 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Dec 28 03:16:57 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Dec 28 03:16:57 2011] Fit fullrun_pn_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Dec 29 04:46:59 2011] Source 17 is offset by -4.918028 and 6.112683 pixels which is larger than
2 X fitted extent = 4.141499 x 4.141499, not incorporating fit results
[Thu Dec 29 04:47:00 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:00 2011] Assessing source extent using major
[Thu Dec 29 04:47:00 2011] Source does appear to be extended
[Thu Dec 29 04:47:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:00 2011] Source is confused with source 3
[Thu Dec 29 04:48:17 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 04:48:17 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Thu Dec 29 04:48:17 2011] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.790
[Thu Dec 29 04:48:17 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 7.30"
[Fri Dec 30 16:07:08 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Dec 30 16:07:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src11.csv
[Fri Dec 30 16:07:08 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Dec 30 16:07:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src11.csv
[Fri Dec 30 16:07:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 16:07:10 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Dec 30 16:07:10 2011] fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Dec 30 16:07:10 2011] Fit fullrun_pn_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Dec 31 08:20:03 2011] Source 17 is offset by -4.867040 and 6.112683 pixels which is larger than
2 X fitted extent = 4.105338 x 4.105338, not incorporating fit results
[Sat Dec 31 08:20:03 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:03 2011] Assessing source extent using major
[Sat Dec 31 08:20:03 2011] Source does appear to be extended
[Sat Dec 31 08:20:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 08:20:53 2011] XMMSAS src. selection expression = ellipse(26170.389557, 28000.015381, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 08:20:53 2011] Writing source region out to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src17_src.reg
[Sat Dec 31 08:20:53 2011] Extracting stamp from image fullrun_pn_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (264, 285) - (339, 360)
[Sat Dec 31 08:20:53 2011] XMMSAS bgd. selection expression = annulus(26170.389557, 28000.015381, 1087.500000, 2175.000000, X, Y) && !ellipse(27922.007965, 27803.341431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.590000, 28698.122000, 1198.896034, 1198.896034, 0.000000, X, Y) && !ellipse(23582.829800, 29460.847600, 434.180812, 434.180812, 0.000000, X, Y) && !ellipse(28973.369800, 27376.261200, 1374.728040, 1374.728040, 0.000000, X, Y) && !ellipse(27988.890808, 25792.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27445.809875, 25791.954956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27556.310000, 23416.876000, 7329.072211, 7329.072211, 0.000000, X, Y) && !ellipse(27763.536000, 28498.745000, 988.328028, 988.328028, 0.000000, X, Y) && !ellipse(30553.596000, 33030.572000, 3267.552094, 1495.616043, 141.132000, X, Y) && !ellipse(30805.784000, 29478.336000, 8970.000258, 8970.000258, 0.000000, X, Y) && !ellipse(28860.908000, 28671.560000, 5237.376151, 5237.376151, 0.000000, X, Y) && !ellipse(28385.191200, 27867.152000, 1264.840036, 1264.840036, 0.000000, X, Y) && !ellipse(31896.794000, 27568.186000, 8787.888253, 8787.888253, 0.000000, X, Y)
[Sat Dec 31 08:20:53 2011] Writing fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src17.gif
[Sat Dec 31 09:30:53 2011] Mean detx,y = (-2493.75, -102.44) 
[Sat Dec 31 09:31:00 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 09:31:56 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 09:31:57 2011] Setting source spectrum file to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 31 09:31:57 2011] Setting bgd. spectrum file to fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jan  1 20:26:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 20:26:07 2012] rmf not generated due to insufficient counts
[Tue Jan  3 01:21:55 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:21:55 2012] Error reading totcts from fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jan  3 01:22:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:02 2012] Using photon index=1.80, rate=0.0174, arf fullrun_pn_xmm0600040101_pi300-10000_pass1_cl_src17.arf
[Tue Jan  3 01:22:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:02 2012] Updating source flux to 7.4e-14
[Tue Jan  3 01:42:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting