[Tue Dec 27 00:08:07 2011] Detection parameters:
  Position = (466.8, 418.8) = 19 20 13.04 44 5 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 697.7 +/- 33.5
  Background counts = 32.2
  Rate = 0.01 +/- 0.0006

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 15.01'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 13.93"
[Wed Dec 28 20:15:54 2011] source mask rpix=3.2, npix_max = 54, mask sum = 63, frac = 1.149
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 13.93"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src17.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src17.csv
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src17.csv
[Thu Dec 29 04:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Dec 29 04:46:17 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Dec 29 04:47:45 2011] Spatial fit model total counts = 1057.570000, observed total counts = 1060.000000
[Thu Dec 29 04:47:45 2011] Offset between fit and detection position for source 57 = 0.176353 pixels
[Thu Dec 29 04:47:45 2011] 1016.120000 total counts/ 620.953000 bgd. counts: snr = 15.858106
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.176353 pixels
  Position = (466.6, 418.8) = 19 20 13.11 44 5 26.6
  Extent = 5.4 (4.7-6.1)", rotation angle = 0
  Source counts = 395.2 +/- 31.9
  Background counts = 621.0
  Rate = 0.007 +/- 0.0006
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 02:05:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 5.41"
[Sat Dec 31 02:05:23 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.987
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 5.41"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src16.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src16.csv
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src16.csv
[Sat Dec 31 08:19:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Dec 31 08:19:36 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Dec 31 08:20:26 2011] Spatial fit model total counts = 901.566000, observed total counts = 903.000000
[Sat Dec 31 08:20:26 2011] Offset between fit and detection position for source 57 = 0.072030 pixels
[Sat Dec 31 08:20:26 2011] 878.682000 total counts/ 522.436000 bgd. counts: snr = 15.585956
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.072030 pixels
  Position = (466.6, 418.8) = 19 20 13.14 44 5 26.8
  Extent = 4.7 (4.1-5.5)", rotation angle = 0
  Source counts = 356.2 +/- 29.6
  Background counts = 522.4
  Rate = 0.006 +/- 0.0005
[Sat Dec 31 08:20:26 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:26 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:26 2011] Source does appear to be extended
[Sat Dec 31 08:20:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 17:36:19 2012] XMMSAS src. selection expression = ellipse(40544.345800, 36390.924400, 283.029608, 283.029608, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src57_src.reg
[Mon Jan  2 17:36:19 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (450, 403) - (483, 435)
[Mon Jan  2 17:36:19 2012] XMMSAS bgd. selection expression = annulus(40544.345800, 36390.924400, 471.716014, 943.432027, X, Y)
[Mon Jan  2 17:36:19 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src57.gif
[Mon Jan  2 18:26:13 2012] Mean detx,y = (-482.80, 16282.38) 
[Mon Jan  2 18:26:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 18:26:45 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 18:26:46 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Jan  2 18:26:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Jan  3 01:22:13 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:13 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jan  3 01:22:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:14 2012] Using photon index=1.80, rate=0.00619, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src57.arf
[Tue Jan  3 01:22:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:14 2012] Updating source flux to 2.8e-13