[Tue Dec 27 00:08:07 2011] Detection parameters:
  Position = (322.6, 254.1) = 19 21 11.30 43 53 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 428.5 +/- 42.0
  Background counts = 510.6
  Rate = 0.008 +/- 0.0008

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 3.66'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 8.26"
[Wed Dec 28 20:15:54 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.086
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 8.26"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src20.csv
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src20.csv
[Thu Dec 29 04:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Dec 29 04:46:17 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Dec 29 04:47:45 2011] Spatial fit model total counts = 10764.500000, observed total counts = 10762.000000
[Thu Dec 29 04:47:45 2011] Offset between fit and detection position for source 50 = 3.321373 pixels
[Thu Dec 29 04:47:45 2011] Warning, changing simple spatial fit ID from 20 to 14
[Thu Dec 29 04:47:45 2011] 10885.979000 total counts/ 10221.500000 bgd. counts: snr = 6.572399
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 3.321373 pixels
  Position = (324.2, 257.0) = 19 21 10.66 43 53 44.2
  Extent = 16.1 (16.1-16.1)", rotation angle = 0
  Source counts = 664.5 +/- 104.3
  Background counts = 10221.5
  Rate = 0.01 +/- 0.002
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:45 2011] Source is confused with source 49
[Sat Dec 31 02:05:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 16.12"
[Sat Dec 31 02:05:23 2011] source mask rpix=3.7, npix_max = 70, mask sum = 63, frac = 0.890
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 16.12"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src19.csv
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src19.csv
[Sat Dec 31 08:19:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Dec 31 08:19:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Dec 31 08:19:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Dec 31 08:19:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:20:26 2011] Warning, spatial fit 19 centroid is now closest to src. 45
[Sat Dec 31 08:20:27 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:27 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:27 2011] Source does appear to be extended
[Sat Dec 31 08:20:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 17:36:19 2012] XMMSAS src. selection expression = ellipse(28157.080800, 22313.436000, 967.314028, 967.314028, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src50_src.reg
[Mon Jan  2 17:36:19 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (269, 201) - (380, 313)
[Mon Jan  2 17:36:19 2012] XMMSAS bgd. selection expression = annulus(28157.080800, 22313.436000, 1612.190046, 3224.380093, X, Y) && !ellipse(29151.135193, 23693.287048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.540000, 25587.322000, 512.199215, 512.199215, 0.000000, X, Y) && !ellipse(26539.374000, 26022.496400, 2225.568064, 2225.568064, 0.000000, X, Y) && !ellipse(28257.214000, 25205.162000, 486.212814, 486.212814, 0.000000, X, Y) && !ellipse(27216.324000, 26398.049074, 1129.376032, 1129.376032, 0.000000, X, Y) && !ellipse(27693.000000, 24492.018000, 931.720027, 931.720027, 0.000000, X, Y) && !ellipse(27267.508728, 23622.713715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.548400, 24289.146000, 1154.104033, 1154.104033, 0.000000, X, Y) && !ellipse(28152.360962, 22662.625916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.510000, 23267.474000, 698.310420, 698.310420, 0.000000, X, Y) && !ellipse(27060.140000, 22832.928000, 1232.744035, 1232.744035, 0.000000, X, Y) && !ellipse(25580.028000, 23937.714000, 808.208023, 808.208023, 0.000000, X, Y) && !ellipse(29653.172028, 24400.926697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.602417, 24834.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.938000, 27384.692000, 2517.264072, 2517.264072, 0.000000, X, Y) && !ellipse(29598.182000, 26105.532000, 1315.120038, 1315.120038, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src50.gif
[Mon Jan  2 18:29:22 2012] Mean detx,y = (-2887.08, -2242.17) 
[Mon Jan  2 18:29:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 18:29:52 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 18:29:53 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jan  2 18:29:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Tue Jan  3 01:22:13 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:13 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Jan  3 01:22:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:15 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src50.arf
[Tue Jan  3 01:22:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:15 2012] Updating source flux to 1.1e-13
[Tue Jan  3 01:32:30 2012] Flag c found in src. 50 procflags, skipping spectral fitting