[Tue Dec 27 00:08:06 2011] Detection parameters:
  Position = (316.2, 268.1) = 19 21 13.87 43 54 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 725.3 +/- 54.1
  Background counts = 694.8
  Rate = 0.01 +/- 0.001

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 2.55'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Wed Dec 28 20:15:54 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.775
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 7.70"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src16.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src16.csv
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src16.csv
[Thu Dec 29 04:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Dec 29 04:46:17 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Dec 29 04:47:45 2011] Spatial fit model total counts = 13339.600000, observed total counts = 13342.000000
[Thu Dec 29 04:47:45 2011] Offset between fit and detection position for source 46 = 6.859707 pixels
[Thu Dec 29 04:47:45 2011] 13634.004000 total counts/ 13190.700000 bgd. counts: snr = 3.859826
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 6.859707 pixels
  Position = (311.6, 263.0) = 19 21 15.73 43 54 10.2
  Extent = 15.4 (15.4-30.8)", rotation angle = 0
  Source counts = 443.3 +/- 116.8
  Background counts = 13190.7
  Rate = 0.008 +/- 0.002
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:45 2011] Source is confused with source 47
[Sat Dec 31 02:05:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 15.41"
[Sat Dec 31 02:05:23 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.979
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 15.41"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src15.csv
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src15.csv
[Sat Dec 31 08:19:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Dec 31 08:19:36 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Dec 31 08:20:26 2011] Source 46 is offset by -5.878161 and 0.646331 pixels which is larger than
2 X fitted extent = 1.569435 x 1.569435, not incorporating fit results
[Sat Dec 31 08:20:26 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 13.572489 pixels away
[Sat Dec 31 08:20:26 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:26 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:26 2011] Source does appear to be extended
[Sat Dec 31 08:20:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 17:36:19 2012] XMMSAS src. selection expression = ellipse(27060.140000, 22832.928000, 924.558027, 924.558027, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src46_src.reg
[Mon Jan  2 17:36:19 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (258, 210) - (365, 316)
[Mon Jan  2 17:36:19 2012] XMMSAS bgd. selection expression = annulus(27060.140000, 22832.928000, 1540.930044, 3081.860089, X, Y) && !ellipse(29151.135193, 23693.287048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.540000, 25587.322000, 512.199215, 512.199215, 0.000000, X, Y) && !ellipse(26539.374000, 26022.496400, 2225.568064, 2225.568064, 0.000000, X, Y) && !ellipse(28257.214000, 25205.162000, 486.212814, 486.212814, 0.000000, X, Y) && !ellipse(27216.324000, 26398.049074, 1129.376032, 1129.376032, 0.000000, X, Y) && !ellipse(24367.669800, 24638.701000, 422.124812, 422.124812, 0.000000, X, Y) && !ellipse(27693.000000, 24492.018000, 931.720027, 931.720027, 0.000000, X, Y) && !ellipse(27267.508728, 23622.713715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.548400, 24289.146000, 1154.104033, 1154.104033, 0.000000, X, Y) && !ellipse(28152.360962, 22662.625916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.510000, 23267.474000, 698.310420, 698.310420, 0.000000, X, Y) && !ellipse(28157.080800, 22313.436000, 1289.752037, 1289.752037, 0.000000, X, Y) && !ellipse(25580.028000, 23937.714000, 808.208023, 808.208023, 0.000000, X, Y) && !ellipse(29653.172028, 24400.926697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.602417, 24834.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.938000, 27384.692000, 2517.264072, 2517.264072, 0.000000, X, Y) && !ellipse(29598.182000, 26105.532000, 1315.120038, 1315.120038, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src46.gif
[Mon Jan  2 18:25:28 2012] Mean detx,y = (-1838.34, -2717.69) 
[Mon Jan  2 18:25:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 18:25:56 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 18:25:56 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon Jan  2 18:25:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Tue Jan  3 01:22:12 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:13 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Tue Jan  3 01:22:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:14 2012] Using photon index=1.80, rate=0.0077, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src46.arf
[Tue Jan  3 01:22:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:14 2012] Updating source flux to 7.3e-14
[Tue Jan  3 01:32:30 2012] Flag b found in src. 46 procflags, skipping spectral fitting
[Tue Jan  3 01:32:30 2012] Flag c found in src. 46 procflags, skipping spectral fitting