[Tue Dec 27 00:08:06 2011] Detection parameters:
  Position = (314.0, 272.1) = 19 21 14.77 43 54 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1023.9 +/- 58.9
  Background counts = 743.3
  Rate = 0.02 +/- 0.001

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 2.22'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 7.54"
[Wed Dec 28 20:15:54 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.54"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Dec 29 04:46:16 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src10 appears to have run properly
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Dec 29 04:46:17 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Dec 29 04:47:45 2011] Warning, spatial fit 10 centroid is now closest to src. 43
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:45 2011] Source is confused with source 43
[Sat Dec 31 02:05:23 2011] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 7.54"
[Sat Dec 31 02:05:23 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.54"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src10.csv
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src10.csv
[Sat Dec 31 08:19:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Dec 31 08:19:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Dec 31 08:19:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Dec 31 08:19:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:20:26 2011] Spatial fit model total counts = 10109.900000, observed total counts = 14196.000000
[Sat Dec 31 08:20:26 2011] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Dec 31 08:20:26 2011] Source 45 is offset by 4.301847 and -0.241819 pixels which is larger than
2 X fitted extent = 1.853094 x 1.853094, not incorporating fit results
[Sat Dec 31 08:20:26 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:26 2011] Assessing source extent using major
[Sat Dec 31 08:20:26 2011] Source does appear to be extended
[Sat Dec 31 08:20:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 17:36:18 2012] Counts = 1023.931396, rescaling region sizes by 2.000000
[Mon Jan  2 17:36:18 2012] XMMSAS src. selection expression = ellipse(27267.508728, 23622.713715, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jan  2 17:36:18 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src45_src.reg
[Mon Jan  2 17:36:18 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (239, 197) - (389, 347)
[Mon Jan  2 17:36:18 2012] XMMSAS bgd. selection expression = annulus(27267.508728, 23622.713715, 4350.000000, 8700.000000, X, Y) && !ellipse(30013.409058, 27684.629761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29151.135193, 23693.287048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.241400, 29462.661400, 367.964811, 367.964811, 0.000000, X, Y) && !ellipse(27715.540000, 25587.322000, 512.199215, 512.199215, 0.000000, X, Y) && !ellipse(26539.374000, 26022.496400, 2225.568064, 2225.568064, 0.000000, X, Y) && !ellipse(28257.214000, 25205.162000, 486.212814, 486.212814, 0.000000, X, Y) && !ellipse(27216.324000, 26398.049074, 1129.376032, 1129.376032, 0.000000, X, Y) && !ellipse(24367.669800, 24638.701000, 422.124812, 422.124812, 0.000000, X, Y) && !ellipse(27398.072000, 27121.482000, 1166.040034, 1166.040034, 0.000000, X, Y) && !ellipse(27693.000000, 24492.018000, 931.720027, 931.720027, 0.000000, X, Y) && !ellipse(25716.548400, 24289.146000, 1154.104033, 1154.104033, 0.000000, X, Y) && !ellipse(19858.362000, 28669.580000, 1464.152042, 1464.152042, 0.000000, X, Y) && !ellipse(28152.360962, 22662.625916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.510000, 23267.474000, 698.310420, 698.310420, 0.000000, X, Y) && !ellipse(27060.140000, 22832.928000, 1232.744035, 1232.744035, 0.000000, X, Y) && !ellipse(30706.002655, 32925.891235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27379.088989, 28257.715179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19051.449400, 18960.589600, 455.307213, 455.307213, 0.000000, X, Y) && !ellipse(28157.080800, 22313.436000, 1289.752037, 1289.752037, 0.000000, X, Y) && !ellipse(25580.028000, 23937.714000, 808.208023, 808.208023, 0.000000, X, Y) && !ellipse(29653.172028, 24400.926697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25976.784821, 26912.502106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.290000, 28462.512000, 1233.144035, 1233.144035, 0.000000, X, Y) && !ellipse(29701.602417, 24834.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.938000, 27384.692000, 2517.264072, 2517.264072, 0.000000, X, Y) && !ellipse(30235.896000, 32356.852000, 1551.000045, 1551.000045, 0.000000, X, Y) && !ellipse(29598.182000, 26105.532000, 1315.120038, 1315.120038, 0.000000, X, Y)
[Mon Jan  2 17:36:18 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src45.gif
[Mon Jan  2 18:16:53 2012] Mean detx,y = (-1411.66, -1991.31) 
[Mon Jan  2 18:16:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 18:21:09 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 18:21:09 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Jan  2 18:21:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Mon Jan  2 20:52:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan  2 20:52:01 2012] rmf not generated due to insufficient counts
[Tue Jan  3 01:22:12 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:12 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Jan  3 01:22:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:14 2012] Using photon index=1.80, rate=0.0185, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src45.arf
[Tue Jan  3 01:22:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:14 2012] Updating source flux to 1.7e-13
[Tue Jan  3 01:32:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting