[Tue Dec 27 00:08:06 2011] Detection parameters:
  Position = (295.7, 277.0) = 19 21 22.13 43 55 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 428.4 +/- 43.5
  Background counts = 617.8
  Rate = 0.008 +/- 0.0008

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 1.57'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 7.21"
[Wed Dec 28 20:15:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 7.21"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src21.csv
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src21.csv
[Thu Dec 29 04:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Dec 29 04:46:17 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Dec 29 04:47:45 2011] Spatial fit model total counts = 11161.700000, observed total counts = 11155.000000
[Thu Dec 29 04:47:45 2011] Offset between fit and detection position for source 44 = 1.698597 pixels
[Thu Dec 29 04:47:45 2011] Warning, changing simple spatial fit ID from 21 to 11
[Thu Dec 29 04:47:45 2011] 11785.830000 total counts/ 10507.700000 bgd. counts: snr = 12.468701
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 1.698597 pixels
  Position = (294.6, 275.6) = 19 21 22.57 43 55 5.2
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source counts = 1278.1 +/- 108.6
  Background counts = 10507.7
  Rate = 0.02 +/- 0.002
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:45 2011] Source is confused with source 40
[Sat Dec 31 02:05:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 14.10"
[Sat Dec 31 02:05:23 2011] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.857
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 14.10"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src20.csv
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Dec 31 08:19:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src20.csv
[Sat Dec 31 08:19:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Dec 31 08:19:36 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Dec 31 08:20:26 2011] Spatial fit model total counts = 14915.300000, observed total counts = 14897.000000
[Sat Dec 31 08:20:26 2011] Offset between fit and detection position for source 44 = 0.071128 pixels
[Sat Dec 31 08:20:26 2011] Warning, changing simple spatial fit ID from 20 to 14
[Sat Dec 31 08:20:26 2011] 15043.157000 total counts/ 14575.000000 bgd. counts: snr = 3.877816
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.071128 pixels
  Position = (294.6, 275.7) = 19 21 22.58 43 55 5.4
  Extent = 10.1 (8.1-12.2)", rotation angle = 0
  Source counts = 468.2 +/- 122.7
  Background counts = 14575.0
  Rate = 0.008 +/- 0.002
[Sat Dec 31 08:20:27 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:27 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:27 2011] Source does appear to be extended
[Sat Dec 31 08:20:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 17:36:19 2012] XMMSAS src. selection expression = ellipse(25580.028000, 23937.714000, 606.156017, 606.156017, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src44_src.reg
[Mon Jan  2 17:36:19 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (260, 241) - (329, 311)
[Mon Jan  2 17:36:19 2012] XMMSAS bgd. selection expression = annulus(25580.028000, 23937.714000, 1010.260029, 2020.520058, X, Y) && !ellipse(27715.540000, 25587.322000, 512.199215, 512.199215, 0.000000, X, Y) && !ellipse(26539.374000, 26022.496400, 2225.568064, 2225.568064, 0.000000, X, Y) && !ellipse(27216.324000, 26398.049074, 1129.376032, 1129.376032, 0.000000, X, Y) && !ellipse(24367.669800, 24638.701000, 422.124812, 422.124812, 0.000000, X, Y) && !ellipse(27398.072000, 27121.482000, 1166.040034, 1166.040034, 0.000000, X, Y) && !ellipse(27693.000000, 24492.018000, 931.720027, 931.720027, 0.000000, X, Y) && !ellipse(27267.508728, 23622.713715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.548400, 24289.146000, 1154.104033, 1154.104033, 0.000000, X, Y) && !ellipse(28152.360962, 22662.625916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.510000, 23267.474000, 698.310420, 698.310420, 0.000000, X, Y) && !ellipse(27060.140000, 22832.928000, 1232.744035, 1232.744035, 0.000000, X, Y) && !ellipse(28157.080800, 22313.436000, 1289.752037, 1289.752037, 0.000000, X, Y) && !ellipse(28770.938000, 27384.692000, 2517.264072, 2517.264072, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src44.gif
[Mon Jan  2 18:30:08 2012] Mean detx,y = (-63.31, -3112.61) 
[Mon Jan  2 18:30:11 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 18:30:29 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 18:30:30 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon Jan  2 18:30:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Jan  3 01:22:13 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:13 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jan  3 01:22:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:15 2012] Using photon index=1.80, rate=0.00814, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src44.arf
[Tue Jan  3 01:22:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:15 2012] Updating source flux to 8.1e-14
[Tue Jan  3 01:32:30 2012] Flag c found in src. 44 procflags, skipping spectral fitting