[Tue Dec 27 00:08:06 2011] Detection parameters:
  Position = (299.1, 281.3) = 19 21 20.78 43 55 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 765.1 +/- 50.6
  Background counts = 691.7
  Rate = 0.02 +/- 0.001

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 1.24'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 7.05"
[Wed Dec 28 20:15:54 2011] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.723
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.05"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src11.csv
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src11.csv
[Thu Dec 29 04:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Dec 29 04:46:17 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Dec 29 04:47:45 2011] Warning, spatial fit 11 centroid is now closest to src. 44
[Thu Dec 29 04:47:45 2011] Spatial fit model total counts = 7911.780000, observed total counts = 7905.000000
[Thu Dec 29 04:47:45 2011] Offset between fit and detection position for source 40 = 3.306019 pixels
[Thu Dec 29 04:47:45 2011] Warning, changing simple spatial fit ID from 11 to 21
[Thu Dec 29 04:47:45 2011] 8046.188000 total counts/ 7112.870000 bgd. counts: snr = 11.066421
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 3.306019 pixels
  Position = (296.1, 279.7) = 19 21 21.95 43 55 23.0
  Extent = 14.4 (12.7-28.9)", rotation angle = 0
  Source counts = 933.3 +/- 89.7
  Background counts = 7112.9
  Rate = 0.02 +/- 0.002
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:45 2011] Source is confused with source 44
[Sat Dec 31 02:05:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 14.43"
[Sat Dec 31 02:05:23 2011] source mask rpix=3.3, npix_max = 58, mask sum = 60, frac = 1.030
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 14.43"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src11.csv
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src11.csv
[Sat Dec 31 08:19:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Dec 31 08:19:36 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Dec 31 08:20:26 2011] Warning, spatial fit 11 centroid is now closest to src. 47
[Sat Dec 31 08:20:26 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:26 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:26 2011] Source does appear to be extended
[Sat Dec 31 08:20:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 17:36:18 2012] XMMSAS src. selection expression = ellipse(25716.548400, 24289.146000, 865.578025, 865.578025, 0.000000, X, Y)
[Mon Jan  2 17:36:18 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src40_src.reg
[Mon Jan  2 17:36:18 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (246, 230) - (346, 329)
[Mon Jan  2 17:36:18 2012] XMMSAS bgd. selection expression = annulus(25716.548400, 24289.146000, 1442.630042, 2885.260083, X, Y) && !ellipse(29151.135193, 23693.287048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.540000, 25587.322000, 512.199215, 512.199215, 0.000000, X, Y) && !ellipse(26539.374000, 26022.496400, 2225.568064, 2225.568064, 0.000000, X, Y) && !ellipse(28257.214000, 25205.162000, 486.212814, 486.212814, 0.000000, X, Y) && !ellipse(27216.324000, 26398.049074, 1129.376032, 1129.376032, 0.000000, X, Y) && !ellipse(24367.669800, 24638.701000, 422.124812, 422.124812, 0.000000, X, Y) && !ellipse(27398.072000, 27121.482000, 1166.040034, 1166.040034, 0.000000, X, Y) && !ellipse(27693.000000, 24492.018000, 931.720027, 931.720027, 0.000000, X, Y) && !ellipse(27267.508728, 23622.713715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.360962, 22662.625916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.510000, 23267.474000, 698.310420, 698.310420, 0.000000, X, Y) && !ellipse(27060.140000, 22832.928000, 1232.744035, 1232.744035, 0.000000, X, Y) && !ellipse(28157.080800, 22313.436000, 1289.752037, 1289.752037, 0.000000, X, Y) && !ellipse(25580.028000, 23937.714000, 808.208023, 808.208023, 0.000000, X, Y) && !ellipse(25976.784821, 26912.502106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.938000, 27384.692000, 2517.264072, 2517.264072, 0.000000, X, Y) && !ellipse(29598.182000, 26105.532000, 1315.120038, 1315.120038, 0.000000, X, Y)
[Mon Jan  2 17:36:18 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src40.gif
[Mon Jan  2 18:21:30 2012] Mean detx,y = (108.61, -2730.87) 
[Mon Jan  2 18:21:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 18:21:58 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 18:21:58 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Jan  2 18:21:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue Jan  3 01:22:12 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:12 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Jan  3 01:22:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:14 2012] Using photon index=1.80, rate=0.0162, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src40.arf
[Tue Jan  3 01:22:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:14 2012] Updating source flux to 1.5e-13
[Tue Jan  3 01:32:30 2012] Flag c found in src. 40 procflags, skipping spectral fitting