[Tue Dec 27 00:08:06 2011] Detection parameters:
  Position = (319.0, 296.1) = 19 21 12.73 43 56 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2588.8 +/- 84.1
  Background counts = 1074.8
  Rate = 0.05 +/- 0.002

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 1.50'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 7.18"
[Wed Dec 28 20:15:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.18"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src2.csv
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src2.csv
[Thu Dec 29 04:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Dec 29 04:46:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Dec 29 04:46:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Dec 29 04:46:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:47:45 2011] Warning, spatial fit 2 centroid is now closest to src. 29
[Thu Dec 29 04:47:45 2011] Source 39 is offset by 3.553766 and 2.527177 pixels which is larger than
2 X fitted extent = 0.857641 x 0.857641, not incorporating fit results
[Thu Dec 29 04:47:45 2011] Spatial fit model total counts = 20723.100000, observed total counts = 20714.000000
[Thu Dec 29 04:47:45 2011] Offset between fit and detection position for source 39 = 0.804247 pixels
[Thu Dec 29 04:47:45 2011] Warning, changing simple spatial fit ID from 2 to 5
[Thu Dec 29 04:47:45 2011] 20367.290000 total counts/ 19052.700000 bgd. counts: snr = 9.523839
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.804247 pixels
  Position = (319.1, 296.9) = 19 21 12.70 43 56 37.7
  Extent = 9.7 (8.7-10.9)", rotation angle = 0
  Source counts = 1314.6 +/- 142.7
  Background counts = 19052.7
  Rate = 0.02 +/- 0.002
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:45 2011] Source is confused with source 29
[Sat Dec 31 02:05:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 9.66"
[Sat Dec 31 02:05:23 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.216
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 9.66"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src2.csv
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src2.csv
[Sat Dec 31 08:19:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Dec 31 08:19:36 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Dec 31 08:20:26 2011] Warning, spatial fit 2 centroid is now closest to src. 34
[Sat Dec 31 08:20:26 2011] Spatial fit model total counts = 20709.800000, observed total counts = 20714.000000
[Sat Dec 31 08:20:26 2011] Offset between fit and detection position for source 39 = 2.248184 pixels
[Sat Dec 31 08:20:26 2011] Warning, changing simple spatial fit ID from 2 to 5
[Sat Dec 31 08:20:26 2011] 19012.184000 total counts/ 18188.300000 bgd. counts: snr = 6.108998
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 2.248184 pixels
  Position = (319.1, 294.7) = 19 21 12.70 43 56 27.9
  Extent = 6.4 (5.9-7.3)", rotation angle = 0
  Source counts = 823.9 +/- 137.9
  Background counts = 18188.3
  Rate = 0.01 +/- 0.002
[Sat Dec 31 08:20:26 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:26 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:26 2011] Source does appear to be extended
[Sat Dec 31 08:20:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 17:36:18 2012] XMMSAS src. selection expression = ellipse(27715.540000, 25587.322000, 384.149411, 384.149411, 0.000000, X, Y)
[Mon Jan  2 17:36:18 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src39_src.reg
[Mon Jan  2 17:36:18 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (297, 273) - (341, 317)
[Mon Jan  2 17:36:18 2012] XMMSAS bgd. selection expression = annulus(27715.540000, 25587.322000, 640.249018, 1280.498037, X, Y) && !ellipse(29151.135193, 23693.287048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.374000, 26022.496400, 2225.568064, 2225.568064, 0.000000, X, Y) && !ellipse(28257.214000, 25205.162000, 486.212814, 486.212814, 0.000000, X, Y) && !ellipse(27216.324000, 26398.049074, 1129.376032, 1129.376032, 0.000000, X, Y) && !ellipse(27398.072000, 27121.482000, 1166.040034, 1166.040034, 0.000000, X, Y) && !ellipse(27693.000000, 24492.018000, 931.720027, 931.720027, 0.000000, X, Y) && !ellipse(27267.508728, 23622.713715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.548400, 24289.146000, 1154.104033, 1154.104033, 0.000000, X, Y) && !ellipse(29653.172028, 24400.926697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25976.784821, 26912.502106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.602417, 24834.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.938000, 27384.692000, 2517.264072, 2517.264072, 0.000000, X, Y) && !ellipse(29598.182000, 26105.532000, 1315.120038, 1315.120038, 0.000000, X, Y)
[Mon Jan  2 17:36:18 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src39.gif
[Mon Jan  2 17:46:49 2012] Mean detx,y = (-193.18, -486.30) 
[Mon Jan  2 17:46:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 17:47:05 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 17:47:05 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon Jan  2 17:47:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Tue Jan  3 01:22:12 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:12 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Jan  3 01:22:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:14 2012] Using photon index=1.80, rate=0.0143, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src39.arf
[Tue Jan  3 01:22:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:14 2012] Updating source flux to 1.8e-13
[Tue Jan  3 01:32:30 2012] Flag b found in src. 39 procflags, skipping spectral fitting
[Tue Jan  3 01:32:30 2012] Flag c found in src. 39 procflags, skipping spectral fitting