[Tue Dec 27 00:08:05 2011] Detection parameters:
  Position = (312.9, 299.0) = 19 21 15.18 43 56 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2495.9 +/- 84.3
  Background counts = 1038.5
  Rate = 0.04 +/- 0.001

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 1.05'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 6.95"
[Wed Dec 28 20:15:54 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 6.95"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src3.csv
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src3.csv
[Thu Dec 29 04:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec 29 04:46:17 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec 29 04:47:45 2011] Spatial fit model total counts = 25552.500000, observed total counts = 25542.000000
[Thu Dec 29 04:47:45 2011] Offset between fit and detection position for source 31 = 3.602296 pixels
[Thu Dec 29 04:47:45 2011] 25609.420000 total counts/ 24624.300000 bgd. counts: snr = 6.277796
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.602296 pixels
  Position = (309.5, 300.1) = 19 21 16.57 43 56 51.3
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 985.1 +/- 160.0
  Background counts = 24624.3
  Rate = 0.02 +/- 0.003
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:45 2011] Source is confused with source 29
[Sat Dec 31 02:05:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 13.91"
[Sat Dec 31 02:05:23 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.024
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 13.91"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Dec 31 08:19:35 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Dec 31 08:19:36 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Dec 31 08:20:26 2011] Spatial fit model total counts = 34621.000000, observed total counts = 34648.000000
[Sat Dec 31 08:20:26 2011] Offset between fit and detection position for source 31 = 3.930676 pixels
[Sat Dec 31 08:20:26 2011] 34434.660000 total counts/ 28101.700000 bgd. counts: snr = 37.778129
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.930676 pixels
  Position = (305.6, 299.7) = 19 21 18.14 43 56 49.6
  Extent = 27.8 (27.7-55.6)", rotation angle = 0
  Source counts = 6333.0 +/- 185.6
  Background counts = 28101.7
  Rate = 0.1 +/- 0.003
[Sat Dec 31 08:20:26 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:26 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:26 2011] Source does appear to be extended
[Sat Dec 31 08:20:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 17:36:18 2012] Counts = 6332.960000, rescaling region sizes by 2.000000
[Mon Jan  2 17:36:18 2012] XMMSAS src. selection expression = ellipse(26539.374000, 26022.496400, 3338.352096, 3338.352096, 0.000000, X, Y)
[Mon Jan  2 17:36:18 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src31_src.reg
[Mon Jan  2 17:36:18 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (114, 108) - (497, 492)
[Mon Jan  2 17:36:18 2012] XMMSAS bgd. selection expression = annulus(26539.374000, 26022.496400, 11127.840320, 22255.680640, X, Y) && !ellipse(30013.409058, 27684.629761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29151.135193, 23693.287048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.241400, 29462.661400, 367.964811, 367.964811, 0.000000, X, Y) && !ellipse(27715.540000, 25587.322000, 512.199215, 512.199215, 0.000000, X, Y) && !ellipse(28257.214000, 25205.162000, 486.212814, 486.212814, 0.000000, X, Y) && !ellipse(27216.324000, 26398.049074, 1129.376032, 1129.376032, 0.000000, X, Y) && !ellipse(24367.669800, 24638.701000, 422.124812, 422.124812, 0.000000, X, Y) && !ellipse(27398.072000, 27121.482000, 1166.040034, 1166.040034, 0.000000, X, Y) && !ellipse(27693.000000, 24492.018000, 931.720027, 931.720027, 0.000000, X, Y) && !ellipse(27267.508728, 23622.713715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.548400, 24289.146000, 1154.104033, 1154.104033, 0.000000, X, Y) && !ellipse(19858.362000, 28669.580000, 1464.152042, 1464.152042, 0.000000, X, Y) && !ellipse(28152.360962, 22662.625916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.510000, 23267.474000, 698.310420, 698.310420, 0.000000, X, Y) && !ellipse(27060.140000, 22832.928000, 1232.744035, 1232.744035, 0.000000, X, Y) && !ellipse(40544.345800, 36390.924400, 377.372811, 377.372811, 0.000000, X, Y) && !ellipse(30706.002655, 32925.891235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27379.088989, 28257.715179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19051.449400, 18960.589600, 455.307213, 455.307213, 0.000000, X, Y) && !ellipse(28157.080800, 22313.436000, 1289.752037, 1289.752037, 0.000000, X, Y) && !ellipse(25580.028000, 23937.714000, 808.208023, 808.208023, 0.000000, X, Y) && !ellipse(25368.246796, 13284.738525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29653.172028, 24400.926697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25976.784821, 26912.502106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.290000, 28462.512000, 1233.144035, 1233.144035, 0.000000, X, Y) && !ellipse(29701.602417, 24834.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.938000, 27384.692000, 2517.264072, 2517.264072, 0.000000, X, Y) && !ellipse(30235.896000, 32356.852000, 1551.000045, 1551.000045, 0.000000, X, Y) && !ellipse(29598.182000, 26105.532000, 1315.120038, 1315.120038, 0.000000, X, Y) && !ellipse(29649.996200, 33264.926200, 726.231221, 726.231221, 0.000000, X, Y) && !ellipse(30360.169159, 33476.961151, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan  2 17:36:18 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src31.gif
[Mon Jan  2 17:47:47 2012] Mean detx,y = (421.04, -684.84) 
[Mon Jan  2 17:47:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 18:01:31 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 18:01:31 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Jan  2 18:01:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Jan  3 01:22:12 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:12 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Jan  3 01:22:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:14 2012] Using photon index=1.80, rate=0.11, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src31.arf
[Tue Jan  3 01:22:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:14 2012] Updating source flux to 9.3e-13
[Tue Jan  3 01:32:30 2012] Flag c found in src. 31 procflags, skipping spectral fitting