[Tue Dec 27 00:08:05 2011] Detection parameters:
  Position = (315.3, 325.4) = 19 21 14.25 43 58 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 505.4 +/- 44.8
  Background counts = 999.6
  Rate = 0.01 +/- 0.001

[Tue Dec 27 00:08:07 2011] Off-axis axis estimate = 2.30'
[Wed Dec 28 20:15:54 2011] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:15:54 2011] Initial guess for spatial extent in simple fitting = 7.58"
[Wed Dec 28 20:15:54 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.994
[Wed Dec 28 20:15:54 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 7.58"
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src18.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src18.csv
[Thu Dec 29 04:46:16 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Dec 29 04:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src18.csv
[Thu Dec 29 04:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Dec 29 04:46:17 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Dec 29 04:46:17 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Dec 29 04:47:45 2011] Warning, spatial fit 18 centroid is now closest to src. 25
[Thu Dec 29 04:47:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:45 2011] Assessing source extent using major
[Thu Dec 29 04:47:45 2011] Source does appear to be extended
[Thu Dec 29 04:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 02:05:23 2011] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 02:05:23 2011] Initial guess for spatial extent in simple fitting = 7.58"
[Sat Dec 31 02:05:23 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.994
[Sat Dec 31 02:05:23 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 7.58"
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src17.csv
[Sat Dec 31 08:19:35 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Dec 31 08:19:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src17.csv
[Sat Dec 31 08:19:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Dec 31 08:19:36 2011] fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Dec 31 08:19:36 2011] Fit fullrun_mos2_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Dec 31 08:20:26 2011] Source 24 is offset by 8.797736 and 4.469531 pixels which is larger than
2 X fitted extent = 4.075016 x 4.075016, not incorporating fit results
[Sat Dec 31 08:20:26 2011] Source 24 is offset by -3.174540 and 6.328312 pixels which is larger than
2 X fitted extent = 4.288432 x 4.288432, not incorporating fit results
[Sat Dec 31 08:20:27 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:27 2011] Assessing source extent using major
[Sat Dec 31 08:20:27 2011] Source does appear to be extended
[Sat Dec 31 08:20:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 08:20:27 2011] Source is confused with source 27
[Mon Jan  2 17:36:19 2012] XMMSAS src. selection expression = ellipse(27379.088989, 28257.715179, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing source region out to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src24_src.reg
[Mon Jan  2 17:36:19 2012] Extracting stamp from image fullrun_mos2_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (278, 288) - (353, 363)
[Mon Jan  2 17:36:19 2012] XMMSAS bgd. selection expression = annulus(27379.088989, 28257.715179, 1087.500000, 2175.000000, X, Y) && !ellipse(30013.409058, 27684.629761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.540000, 25587.322000, 512.199215, 512.199215, 0.000000, X, Y) && !ellipse(26539.374000, 26022.496400, 2225.568064, 2225.568064, 0.000000, X, Y) && !ellipse(27216.324000, 26398.049074, 1129.376032, 1129.376032, 0.000000, X, Y) && !ellipse(27398.072000, 27121.482000, 1166.040034, 1166.040034, 0.000000, X, Y) && !ellipse(25976.784821, 26912.502106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.290000, 28462.512000, 1233.144035, 1233.144035, 0.000000, X, Y) && !ellipse(28770.938000, 27384.692000, 2517.264072, 2517.264072, 0.000000, X, Y) && !ellipse(29598.182000, 26105.532000, 1315.120038, 1315.120038, 0.000000, X, Y)
[Mon Jan  2 17:36:19 2012] Writing fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src24.gif
[Mon Jan  2 18:28:03 2012] Mean detx,y = (1983.27, 989.88) 
[Mon Jan  2 18:28:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 18:28:24 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 18:28:24 2012] Setting source spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Jan  2 18:28:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Jan  2 21:32:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan  2 21:32:25 2012] rmf not generated due to insufficient counts
[Tue Jan  3 01:22:13 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:13 2012] Error reading totcts from fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Jan  3 01:22:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:14 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0600040101_pi300-10000_pass1_cl_src24.arf
[Tue Jan  3 01:22:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:14 2012] Updating source flux to 1.2e-13
[Tue Jan  3 01:32:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting