[Tue Dec 27 00:06:22 2011] Detection parameters:
  Position = (313.4, 329.7) = 19 21 14.99 43 58 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.2 +/- 44.9
  Background counts = 951.5
  Rate = 0.005 +/- 0.0009

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 2.51'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 7.69"
[Wed Dec 28 03:16:59 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.216
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 7.69"
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src37.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src37.csv
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src37.csv
[Wed Dec 28 20:15:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Dec 28 20:15:53 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu Dec 29 04:47:25 2011] Spatial fit model total counts = 13443.100000, observed total counts = 13437.000000
[Thu Dec 29 04:47:25 2011] Offset between fit and detection position for source 52 = 2.037175 pixels
[Thu Dec 29 04:47:25 2011] Warning, changing simple spatial fit ID from 37 to 34
[Thu Dec 29 04:47:25 2011] 12929.733000 total counts/ 12385.500000 bgd. counts: snr = 4.890217
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 2.037175 pixels
  Position = (315.4, 330.2) = 19 21 14.20 43 59 2.4
  Extent = 14.7 (13.7-15.2)", rotation angle = 0
  Source counts = 544.2 +/- 113.7
  Background counts = 12385.5
  Rate = 0.009 +/- 0.002
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:25 2011] Source is confused with source 3
[Fri Dec 30 16:07:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 14.73"
[Fri Dec 30 16:07:12 2011] source mask rpix=3.4, npix_max = 60, mask sum = 54, frac = 0.893
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 14.73"
[Sat Dec 31 02:05:20 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src34.ximg exists
[Sat Dec 31 02:05:20 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat Dec 31 02:05:20 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src34 appears to have run properly
[Sat Dec 31 02:05:23 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat Dec 31 02:05:23 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Dec 31 02:05:23 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Sat Dec 31 08:20:17 2011] Warning, spatial fit 34 centroid is now closest to src. 3
[Sat Dec 31 08:20:17 2011] Spatial fit model total counts = 16735.600000, observed total counts = 16746.000000
[Sat Dec 31 08:20:17 2011] Offset between fit and detection position for source 52 = 2.320204 pixels
[Sat Dec 31 08:20:17 2011] Warning, changing simple spatial fit ID from 34 to 36
[Sat Dec 31 08:20:17 2011] 16377.230000 total counts/ 15219.300000 bgd. counts: snr = 9.386095
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 2.320204 pixels
  Position = (313.1, 329.7) = 19 21 15.11 43 59 0.4
  Extent = 30.3 (26.6-60.7)" x 11.7 (9.0-13.7)", rotation angle = 52 (41-60) degrees
  Source counts = 1157.9 +/- 128.0
  Background counts = 15219.3
  Rate = 0.02 +/- 0.002
[Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:17 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:17 2011] Source does appear to be extended
[Sat Dec 31 08:20:17 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.94
[Sat Dec 31 08:20:17 2011] Source is asymmetric
[Mon Jan  2 03:28:52 2012] Counts = 1157.930000, rescaling region sizes by 2.000000
[Mon Jan  2 03:28:52 2012] XMMSAS src. selection expression = ellipse(27192.880400, 28638.302000, 3639.696105, 1409.556041, 52.433200, X, Y)
[Mon Jan  2 03:28:52 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src52_src.reg
[Mon Jan  2 03:28:52 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (104, 121) - (522, 539)
[Mon Jan  2 03:28:52 2012] XMMSAS bgd. selection expression = annulus(27192.880400, 28638.302000, 12132.320349, 24264.640698, X, Y) && !ellipse(28238.106000, 27176.154000, 1251.440036, 1251.440036, 0.000000, X, Y) && !ellipse(27688.124000, 28271.764000, 2357.392068, 606.981617, 48.721800, X, Y) && !ellipse(30738.320000, 26252.896000, 1022.096029, 1022.096029, 0.000000, X, Y) && !ellipse(23585.827600, 29457.780400, 408.816812, 408.816812, 0.000000, X, Y) && !ellipse(29822.396000, 25300.544000, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(29852.123993, 26582.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.971600, 25711.402200, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(28219.123800, 25522.438800, 1178.680034, 1178.680034, 0.000000, X, Y) && !ellipse(27538.127100, 26163.985600, 2258.976065, 2258.976065, 0.000000, X, Y) && !ellipse(28974.516000, 26688.750000, 872.048025, 872.048025, 0.000000, X, Y) && !ellipse(26686.330000, 26215.824240, 1104.984032, 1104.984032, 0.000000, X, Y) && !ellipse(26277.552000, 25426.858000, 923.592027, 923.592027, 0.000000, X, Y) && !ellipse(24371.776400, 24644.462400, 432.137612, 432.137612, 0.000000, X, Y) && !ellipse(27776.512000, 25036.170000, 1180.856034, 1180.856034, 0.000000, X, Y) && !ellipse(27159.400000, 24550.488000, 2337.952067, 2337.952067, 0.000000, X, Y) && !ellipse(28307.937714, 24143.473816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40574.125275, 36333.438141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26836.446000, 23727.012000, 1168.976034, 1168.976034, 0.000000, X, Y) && !ellipse(29582.609314, 27216.253387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31868.610779, 27981.748779, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26850.952000, 23176.604980, 1242.344036, 1242.344036, 0.000000, X, Y) && !ellipse(26396.077000, 23078.330800, 912.712026, 912.712026, 0.000000, X, Y) && !ellipse(28131.505707, 22833.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.972000, 22538.456000, 2273.384065, 2273.384065, 0.000000, X, Y) && !ellipse(30703.012000, 33300.752000, 1607.728046, 1066.720031, 221.992000, X, Y) && !ellipse(29441.576813, 24833.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.683960, 22665.376526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29004.201000, 23464.568000, 1176.720034, 1176.720034, 0.000000, X, Y) && !ellipse(29796.098000, 27591.470000, 1265.560036, 1265.560036, 0.000000, X, Y) && !ellipse(31224.803345, 32791.642334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28066.134400, 27775.382000, 1250.232036, 808.736023, 50.850000, X, Y) && !ellipse(30758.488000, 33432.190000, 1417.264041, 1417.264041, 0.000000, X, Y) && !ellipse(25388.140930, 13328.080551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27090.344000, 28818.382000, 1213.232035, 1213.232035, 0.000000, X, Y) && !ellipse(31714.630000, 32544.318000, 1630.368047, 1630.368047, 0.000000, X, Y) && !ellipse(29563.334000, 33076.368000, 1004.216029, 1004.216029, 0.000000, X, Y) && !ellipse(30758.468000, 16872.258000, 1655.272048, 1655.272048, 0.000000, X, Y)
[Mon Jan  2 03:28:52 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src52.gif
[Mon Jan  2 05:19:57 2012] Mean detx,y = (1043.52, -2311.89) 
[Mon Jan  2 05:20:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 05:32:27 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 05:32:28 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Mon Jan  2 05:32:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Tue Jan  3 01:22:08 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:08 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Tue Jan  3 01:22:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:11 2012] Using photon index=1.80, rate=0.0201, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src52.arf
[Tue Jan  3 01:22:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:11 2012] Updating source flux to 1.9e-13
[Tue Jan  3 01:22:18 2012] Flag c found in src. 52 procflags, skipping spectral fitting