[Tue Dec 27 00:06:21 2011] Detection parameters:
  Position = (466.9, 418.2) = 19 20 13.00 44 5 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 977.8 +/- 38.7
  Background counts = 41.5
  Rate = 0.02 +/- 0.0007

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 14.99'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 13.92"
[Wed Dec 28 03:16:59 2011] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.168
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 13.92"
[Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src18.ximg exists
[Wed Dec 28 20:15:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src18.csv
[Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Dec 28 20:15:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src18.csv
[Wed Dec 28 20:15:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Dec 28 20:15:53 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Dec 29 04:47:25 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 17.578593 pixels away
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 16:07:12 2011] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 13.92"
[Fri Dec 30 16:07:12 2011] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.168
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 13.92"
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src18.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src18.csv
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src18.csv
[Sat Dec 31 02:05:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Dec 31 02:05:21 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Dec 31 08:20:17 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 17.578593 pixels away
[Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:17 2011] Assessing source extent using major
[Sat Dec 31 08:20:17 2011] Source does appear to be extended
[Sat Dec 31 08:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 03:28:51 2012] XMMSAS src. selection expression = ellipse(40574.125275, 36333.438141, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan  2 03:28:51 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src40_src.reg
[Mon Jan  2 03:28:51 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (429, 381) - (504, 456)
[Mon Jan  2 03:28:51 2012] XMMSAS bgd. selection expression = annulus(40574.125275, 36333.438141, 1087.500000, 2175.000000, X, Y)
[Mon Jan  2 03:28:51 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src40.gif
[Mon Jan  2 04:43:48 2012] Mean detx,y = (16473.29, 433.03) 
[Mon Jan  2 04:43:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 04:44:16 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 04:44:17 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Jan  2 04:44:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Jan  2 12:53:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan  2 12:53:29 2012] rmf not generated due to insufficient counts
[Tue Jan  3 01:22:07 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:07 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Jan  3 01:22:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:10 2012] Using photon index=1.80, rate=0.0169, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src40.arf
[Tue Jan  3 01:22:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:10 2012] Updating source flux to 4.7e-13
[Tue Jan  3 01:22:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting